Skip to main content
Exclusive North & Central Texas Fibre Tech™ Dealer

That crack isn't just cosmetic.

Emergency repairs available — 24–48 hr response

Expert Pool Repair — Permanent Structural Solutions

In Texas soil and heat, a small crack or leak compounds fast — and most patch jobs fail within a couple of years. We diagnose the root cause and make permanent, warrantied structural repairs, with a fiberglass conversion option that ends recurring cracks for good.

  • Emergency repairs in 24–48 hours, statewide
  • Repairs engineered for Texas soil & temperature swings
  • Warranties from 1 to 5 years by method — 10 or 25 on conversion
  • We document the damage and work with your insurance adjuster
  • Serving all of Texas
Summer Special - 5% OFF Crack Repairs

Get Your Free Pool Assessment

No obligation. 90-minute on-site evaluation. Expert consultation.

We respect your privacy. Your information will never be shared.

Warning Signs

Recognize Any of These Pool Problems?

In Texas soil, minor damage becomes structural fast. These are the signs your pool needs repair now — not next season.

Cracks Through the Shell

A crack wider than ⅛", offset, or running through the gunite — not just the plaster — is structural and lets water escape.

High Risk

Bond-Beam & Coping Movement

Horizontal cracks at the tile line, shifting coping, or a deck pulling away from the pool signal bond-beam failure.

High Risk

Rust Stains & Spalling

Rust bleeding through the surface or concrete chipping away means the rebar is corroding — "concrete cancer" that spreads.

Medium Risk

Unexplained Water Loss

Losing more than normal evaporation points to a leak in the shell, plumbing, or a fitting — and it only gets worse.

High Risk
Complete Pool Repair Service Services

Everything Your Pool Needs, Under One Roof

We diagnose the root cause first, then make the repair that actually lasts — from a targeted fix to a permanent conversion.

Pool Wall Bulge Repair

Bowing or bulging pool walls re-supported and reinforced — with the settled backfill and hydrostatic pressure that caused the bulge corrected at the source.

Leak Detection & Repair

We locate shell, plumbing, and fitting leaks with certified detection, then repair them permanently — no more guessing.

Skimmer Repair & Replacement

Cracked skimmers removed and replaced with a precision, watertight seal — backed by a 5-year waterproof warranty.

Equipment & Plumbing

Pumps, motors, filters, returns, drains, and automation repaired or upgraded — including energy-saving variable-speed pumps.

Fiberglass & Gelcoat Repair

Spider cracks, osmotic blisters, and faded gelcoat on fiberglass pools ground out, rebuilt, and color-matched.

The Complete Guide

Everything You Want to Know — In Depth

Material comparisons, the process, and exactly what to expect — jump to any topic.

7–10 Days*Standard repair timeline
24–48 HrsEmergency response
10 or 25 YearOn fiberglass conversion
$2MInsured · CPO certified

1Repair Options Compared

The right repair depends on the crack and the cause. We match the method to the problem — and when cracks keep coming back, a fiberglass conversion ends the cycle permanently.

MethodBest ForRelative CostWarranty
Surface SealingCosmetic / hairline cracks$1 year
Epoxy InjectionStable structural cracks$$3 years
Torque-Lock StaplesActive / expanding cracks$$$5 years
Bond Beam RebuildEdge / beam failure$$$5 years
HEXConvert™ / Fibre Tech™ ConversionA permanent end to recurring cracks$$$ one-time10 or 25 years

Relative cost and warranties are typical; your exact quote and the right method are confirmed at the free on-site assessment.

Ready to transform your pool?

2Repairs We Handle

We repair every common structural and equipment problem on Texas pools — and document everything for warranty and insurance.

  • Structural cracks — sealed, epoxy-injected, or torque-lock stapled depending on whether the crack is stable or still moving.
  • Bond beam failure — full rebuild with steel reinforcement, engineered concrete, waterproofing, and tile/coping reset.
  • Concrete cancer (rebar corrosion) — corrosion stopped and the shell sealed; a fiberglass conversion creates an impermeable barrier so it can't return.
  • Fiberglass & gelcoat — spider cracks, osmotic blisters, and oxidation ground out, rebuilt, and color-matched.
  • Skimmers & fittings — cracked skimmers and leaking returns/penetrations replaced and resealed watertight.
  • Equipment & plumbing — pumps, motors, filters, drains, and automation; variable-speed pump upgrades cut running costs.
  • Leaks — located with certified leak detection, then permanently repaired.

The repairs we handle most often include fiberglass pool repair, structural crack repair, skimmer replacement, and pool wall bulge repair — each diagnosed to its root cause before any work begins.

Ready to transform your pool?

3Repair, or Convert for Good?

Not every pool needs a conversion — and we'll tell you straight which path makes sense for yours.

When a Targeted Repair Is Right

An isolated crack, a single skimmer or fitting leak, or an equipment fault on an otherwise sound shell is a strong repair candidate — fixed once, warrantied, and you're back in the water.

When Conversion Saves You Money

If cracks keep returning after repair, or you're facing multiple problems at once, paying for repair after repair adds up fast. A one-time HEXConvert™ fiberglass conversion (10-year warranty) — or premium Fibre Tech™ (25-year transferable) — seals the shell permanently and ends the cycle.

Our Honest Assessment

At the free on-site assessment we identify the root cause and recommend the most cost-effective path — repair, convert, or (rarely) replace — based on what actually makes financial sense for your pool, not what's most expensive.

When repairs start adding up, a permanent fiberglass resurfacing often makes more sense than repeated fixes.

Ready to transform your pool?

4Our Repair Process

Every repair starts with diagnosis, not a guess — and you get the scope, price, and timeline up front. Emergency repairs are available within 24–48 hours statewide.

  1. Day 1 — Assessment & quote: root-cause inspection, leak/pressure testing as needed, and a written, itemized scope.
  2. Days 2–3 — Prep & drain: site protection and draining only if the repair requires it.
  3. Days 3–7 — Structural repair: the matched method — sealing, injection, stapling, bond-beam rebuild, or conversion — performed and inspected.
  4. Days 7–10 — Cure & finish: controlled cure, color-matched finishing, and a full quality check.
  5. Day 10 — Refill & startup: pool refilled, equipment restarted, and warranty documentation delivered.

Typical timeline: 7–10 business days*; emergency repairs in 24–48 hours. Larger structural rebuilds can run a little longer.

Ready to transform your pool?

FAQ

Your Questions, Answered

A crack is structural if it runs through the gunite (not just the plaster), is wider than about ⅛ inch, shows offset or displacement, has rust staining nearby, continues through the tile line, or leaks water. Hairline surface cracks with no water loss or rust are usually cosmetic. When in doubt, our free assessment tells you for sure.

It depends on the crack and method: surface sealing is the least expensive, epoxy injection and torque-lock stapling cost more (and carry longer warranties), and a bond-beam rebuild or fiberglass conversion is a larger investment. You get a firm, itemized quote at the free assessment — early repair almost always costs far less than waiting.

If it's an isolated crack, leak, or equipment fault on a sound shell, a targeted repair is the smart call. If cracks keep returning or you're facing several problems at once, a one-time fiberglass conversion usually costs less over time than repeated repairs — and it's permanent. We give you an honest recommendation either way.

HEXConvert™ is our proprietary fiberglass conversion system. After stabilizing the structure and treating cracks, we bond a flexible, non-porous fiberglass shell to the pool — it flexes with soil movement instead of cracking and seals out water permanently. It carries a 10-year comprehensive warranty; premium Fibre Tech™ offers a 25-year transferable warranty.

Most repairs complete in about 7–10 days, from Day 1 assessment to refill and startup. Emergency repairs are available within 24–48 hours statewide — call us and we'll prioritize the visit.

Yes — emergency repairs are available within 24–48 hours across Texas for active leaks, structural failures, and storm or freeze damage. Call and we'll dispatch as quickly as possible.

Yes. We locate shell, plumbing, and fitting leaks with certified leak-detection methods (pressure and dye testing), then make the permanent repair — so the problem is diagnosed properly the first time.

Yes — a cracked skimmer or failing skimmer-to-shell bond is a common repair. We remove the failed unit, integrate and reseal a new one watertight, and back it with a 5-year waterproof seal warranty.

Yes — pumps, motors, filters, returns, main drains, and automation. We also upgrade to energy-efficient variable-speed pumps, which can significantly cut your running costs.

Yes. We grind out spider cracks and osmotic blisters, rebuild the laminate, and refinish with a color-matched gel coat so the repair is invisible and structurally sound.

Concrete cancer is rebar corrosion inside the shell — you'll see rust stains bleeding through and concrete spalling (chipping away). It spreads if untreated. We stop the corrosion and seal the shell; a fiberglass conversion creates an impermeable barrier so it can't recur.

Yes, when it's properly engineered. We design repairs for Texas — deep-set anchors for soil movement, flexible compounds for temperature swings, and proper drainage to relieve hydraulic pressure — so the fix doesn't simply re-crack. Fiberglass conversions carry a 10- or 25-year warranty.

Often, yes — storm and freeze damage, tree-root damage, and sudden failures are commonly covered (wear-and-tear usually isn't). We document the damage thoroughly and work directly with your adjuster to support the claim. Check your specific policy for ground-movement coverage.

Mostly soil movement — Texas clay swells and shrinks with wet and dry cycles, stressing rigid gunite and plaster — plus temperature swings, hydraulic pressure from poor drainage, and original construction quality. A flexible fiberglass surface is engineered to move with the soil.

It depends on the repair. Some fitting and equipment repairs are done without draining; structural crack repair, bond-beam work, and conversions require draining so we can access and properly bond the repair. We confirm at the assessment.

It depends on the method: surface sealing carries a 1-year warranty, epoxy injection 3 years, torque-lock staples and bond-beam rebuilds 5 years, and a fiberglass conversion 10 or 25 years. We match the method to how permanent you need the fix to be.

Usually yes — a sound older pool is well worth repairing, and converting its surface to fiberglass can give it another 25+ years. If the shell has widespread structural failure, we'll tell you honestly when replacement or full conversion is the better value.

Yes, we repair year-round. Cooler months often book faster, and freeze damage is one of the most common winter repair calls — emergency response is available 24–48 hours statewide.

If your pool needs both a surface refresh and structural repair, we handle them together — we repair the cracks first, then resurface, so you get one permanent result instead of resurfacing over a problem that comes back.

We repair pools across all of Texas, with emergency response statewide. Call us to confirm scheduling for your address.

Don't Let a Small Crack Become a Big Repair

Get a free, no-obligation structural assessment from Texas' permanent-repair specialists — matched to your pool's problem, engineered for Texas conditions, and warrantied.

Hexagon Fiberglass Pools · Serving All of Texas · CPO Certified · $2M Insured · 24–48 Hr Emergency Repairs

Free Assessment