Abilene Fiberglass Pool Repair & Resurfacing 7-10 Day Install

Abilene's pools face a double threat. Abilene's municipal water averages 240 mg/L calcium carbonate — 14 grains per gallon, classified as very hard — and it eats through plaster, scales surfaces, and forces monthly chemical battles. Below ground, Taylor County's caliche clay loam shifts with every rain and drought cycle, cracking rigid pool surfaces from underneath. Standard replastering contractors patch the symptom. Hexagon eliminates the cause.

Hexagon Fiberglass Pools specializes exclusively in fiberglass solutions engineered for Abilene's hard water and caliche soil conditions. Choose our proprietary HEXConvert™ system with comprehensive 10-year labor and material warranty, or premium Fibre Tech™ technology with industry-leading 25-year transferable warranty.

10 or 25 Yr

Warranty Options

7-10 Days

Installation

Military Ready

Dyess AFB Discounts

Call for a Complimentary Quote972-789-2983 Prefer a form?Get Your Abilene Quote

No obligation · Same-week assessments available · Veterans & active military welcome

Summer Special - 5% OFF Crack Repairs

Get Your Complimentary Abilene Quote

No obligation. Free on-site assessment — one business-day response.

Abilene Pool Services

Complete fiberglass solutions for every pool type

Fiberglass Pool Resurfacing

Replace deteriorating plaster or marcite on your Abilene pool with permanent fiberglass — eliminating the scaling, staining, and cracking that Abilene's 240+ mg/L hard water and caliche clay soil inflict on traditional surfaces year after year.

Switching to fiberglass is the lasting approach to Abilene pool resurfacing that resists scaling and caliche movement alike.

Permanent surface vs. recurring $12,000–$20,000 replastering
Glass-smooth — never rough, stained, or scaled again
Up to 45% reduction in chemical usage
Algae-resistant non-porous surface
Choice of 10-yr or 25-yr transferable warranty

7-10 Day Install 10 or 25-Yr Warranty Hard Water Chemistry Guide

Learn About Abilene Resurfacing

Fiberglass Pool Resurfacing in Abilene — before and after

What Is Pool Resurfacing — and Why Does Your Abilene Pool Need It?

Pool resurfacing is the process of removing or overcoating your pool's existing interior finish and applying a new, durable surface layer directly to the shell. Every pool surface degrades over time — plaster chalks and stains, marcite roughens and scales, vinyl liners fade and tear. In Abilene, that degradation is accelerated by three compounding factors: caliche clay loam soil in Taylor County that shifts with every rain-drought cycle and cracks rigid pool finishes from beneath; Abilene municipal water averaging 240 mg/L hardness (14 grains per gallon) that deposits thick calcium scale on any porous surface; and a long, punishing May–October pool season with temperatures regularly exceeding 100°F and relentless UV exposure.

Abilene's failure signature is distinct from DFW markets. The city's caliche soil fractures in localized pressure points rather than swelling uniformly — concentrating structural stress at fittings, steps, and floor sections near irrigation lines. The compounding factor is water chemistry: at 240 mg/L, Abilene's municipal supply etches porous plaster at roughly twice the national rate. The average replastering cycle here is 4–6 years — compared to 7–10 nationally — because each acid wash that removes scale also removes surface material, leaving a thinner, more porous surface that scales faster on the next cycle. Many Abilene pools built in the 1980s and 1990s have already completed three or four replastering cycles. The underlying shell is not going to improve on the existing surface.

Signs Your Abilene Pool Needs Resurfacing

Rough or sandpaper texture on pool floor and walls
Persistent staining that acid washing no longer removes
Visible cracks, chips, or delaminating patches
Chalky white calcium deposits or efflorescence
Recurring algae despite correct chemical balance
Fading, discoloration, or uneven finish color
Unexplained water loss (surface micro-leaks)
Surface age over 7 years on plaster or marcite

Pool Resurfacing Services in Abilene, TX

Hexagon resurfaces every pool type found in Abilene — from aging plaster gunite pools in Elmwood and Wylie to vinyl-liner pools across the Beltway corridor. All paths lead to the same outcome: a permanent fiberglass surface engineered for Abilene's hard water and caliche soil conditions.

Most Common

Plaster & Marcite Pool Resurfacing

The majority of Abilene pools built before 2010 have white plaster or marcite interiors. These surfaces are porous, chemically reactive, and highly vulnerable to Abilene's 240 mg/L hard water — calcium scale accumulates rapidly, dulling gloss and providing anchor points for algae. Hexagon removes the deteriorated plaster layer, repairs any structural cracks in the gunite shell driven by Taylor County caliche movement, and applies HEXConvert™ or Fibre Tech™ fiberglass directly to the prepared surface — ending the replaster cycle permanently.

Replastering eliminated — not deferred
Structural crack repair included
Non-porous surface stops hard water scaling
Glass-smooth finish, never rough again

Growing Demand

Pebble & Aggregate Finish Resurfacing

Pebble Tec, Pebble Sheen, and exposed-aggregate finishes were popular in Abilene's 2000s construction boom. In Abilene's exceptionally hard water, aggregate finishes roughen and scale faster than in any other Texas market — calcium deposits fill the texture gaps within three to five years, creating an abrasive surface that resists cleaning. Fiberglass resurfacing over aggregate provides a glass-smooth, chemically neutral surface at a fraction of the cost of full shell demolition and re-plaster.

Eliminates aggregate roughness and hard water scaling
Applied over existing aggregate — no demolition
Chemical neutrality reduces Abilene's balancing burden
Unified smooth surface across pool and spa

Vinyl Liner Pools

Vinyl Liner Pool Resurfacing

Vinyl liner pools in Abilene face a $3,500–$6,000 replacement cost every 7–10 years — and each replacement leaves the underlying shell condition unimproved. West Texas UV and caliche soil movement shorten liner life further than national averages. Hexagon resurfaces vinyl liner pools by preparing the existing shell structure and applying a permanent fiberglass interior, eliminating liner replacement cycles entirely. The result is a non-porous, algae-resistant surface that outperforms any vinyl liner on longevity, chemistry, and aesthetics.

Liner replacement cycle ends permanently
No ongoing $3.5–6k liner costs
Permanent non-porous surface applied to shell
Handles any existing pool shape or size

Existing Fiberglass

Fiberglass Pool Re-Resurfacing

Fiberglass pools 15–25 years old in Abilene often show accelerated oxidation, gel coat fading, osmotic blistering, or spider cracking — driven by sustained 100°F+ heat, intense UV, and hard water chemistry imbalances. Hexagon re-resurfaces aging fiberglass shells by grinding, repairing, and applying a fresh HEXConvert™ or Fibre Tech™ system over the existing shell. The result is a pool that performs and looks like a new fiberglass installation, with full warranty coverage starting from day one.

Restores gel coat degraded by 240 mg/L mineral scale and 100°F+ UV load
Caliche-movement spider cracks and hard-water blisters repaired before application
Full warranty — transferable for Dyess AFB PCS closings
15–20 year life extension on existing West Texas fiberglass

Why Fiberglass Resurfacing — Not Replaster, Pebble Tec, or Epoxy Paint

Abilene homeowners are typically presented with four resurfacing options. Here is an honest comparison of how each performs in Abilene's hard water and caliche soil conditions over a 20-year ownership horizon.

Surface Type	Lifespan	20-Yr Cost	Hard Water	Clay Soil
White Plaster	5–7 yrs	$60k–$114k	Scales heavily	Cracks with movement
Marcite	6–8 yrs	$54k–$96k	Stains & scales	Cracks with movement
Pebble / Aggregate	8–12 yrs	$45k–$72k	Roughens quickly	Cracks with movement
Epoxy Paint	2–4 yrs	$70k–$100k+	Peels & blisters	Delamination risk
✓ HEXConvert™ / Fibre Tech™ Fiberglass	20–30 yrs	$14k–$22k	Non-porous — no scale	Flexes — no cracking

* 20-year cost estimates based on Abilene pool averages (400–700 sq ft). Includes material, labor, and chemistry costs per cycle. Hard water chemistry premiums reflect Abilene's 240+ mg/L water supply.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Abilene homeowners who have already completed two or more replastering cycles — one installation ends the acid wash and replaster schedule entirely.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for military families planning to PCS — warranty transfers at closing
White or light blue standard — other colors available at an upcharge

Best for: Dyess AFB families with PCS timelines — the 25-year warranty legally transfers at closing, adding documented value regardless of when orders arrive.

Abilene Hard Water Has Been Winning. Fiberglass Ends That.

Hexagon assesses your Abilene pool, accounts for your caliche soil conditions and 240 mg/L water chemistry, and gives you a fixed-price quote. No acid wash in two years. No replaster in five. One permanent surface.

Get Your Free Abilene Resurfacing Assessment

Save $20k–$40k lifetime

Fiberglass Pool Conversion

Vinyl liner, gunite, concrete, or aging fiberglass — Hexagon converts pools of any size and configuration to superior fiberglass without excavation. Abilene's caliche soil and hard water make conversion the permanent solution where traditional maintenance cycles have no end.

Vinyl liner → fiberglass — eliminates $5–8k annual liner replacement costs
Gunite → fiberglass — permanently ends clay-driven structural cracking
Concrete → fiberglass — stops the hard water maintenance cycle
Fiberglass restoration — modern surface, extended life, transferable warranty

HEXConvert™ 10-yr Fibre Tech™ 25-yr

Explore Abilene Conversion

Fiberglass Pool Conversion in Abilene — before and after

What Is a Fiberglass Pool Conversion — and Is It the Right Choice for Your Abilene Pool?

A fiberglass pool conversion is a complete interior system change — transforming your existing pool from its current surface technology (vinyl liner, plaster, gunite, concrete) to a permanent, non-porous fiberglass shell. Unlike resurfacing, which preps and overcoats a surface that still has usable structure, conversion is the appropriate choice when the underlying system itself has reached the end of its viable life: when a vinyl liner pool has had two or more liner replacements, when a gunite shell has sustained repeated structural cracking from Abilene's caliche clay movement, or when the cumulative cost of hard water treatments and surface repairs now rivals the cost of a one-time permanent solution.

Critically, Hexagon performs fiberglass pool conversions without excavation and without disruption to your existing decking, landscaping, or outdoor living infrastructure. For Abilene properties — where established landscaping and irrigation systems make ground disturbance costly — this is the deciding factor. The entire conversion is completed from inside the pool in 7–10 days, with zero contact with surrounding property.

You're a Conversion Candidate If…

Your vinyl liner has been replaced once or more already
Your gunite or concrete pool cracks recur after every repair
Annual maintenance costs exceed $3,000 with no improvement
Your pool surface has multiple simultaneous failure types
You're planning a renovation and want a permanent solution
Your pool is 15+ years old and has never had a system upgrade
You want to eliminate all future resurfacing from your budget
You're preparing the property for sale and want a warranty asset

Fiberglass Pool Conversion by Pool Type

Hexagon converts every pool type found in Abilene. The conversion method is tailored to the existing shell structure — but the outcome is always the same: a permanent, low-maintenance fiberglass interior that resists Abilene's hard water and caliche soil conditions with full warranty coverage.

Most Requested

Gunite & Shotcrete Pool Conversion

Gunite and shotcrete pools are the most common pool type in Abilene's established neighborhoods — Elmwood, Lytle area, Wylie corridor, and older central Abilene subdivisions. Over time, Taylor County's caliche clay loam causes the gunite shell to develop structural cracks that return after every repair. Fiberglass conversion permanently ends this cycle by applying a flexible, non-porous surface that accommodates the seasonal soil movement that makes rigid concrete crack.

Structural crack cycle ends permanently
Flexible fiberglass accommodates caliche movement
Applied directly to prepared gunite shell
Hard water scaling eliminated — non-porous surface

Highest ROI

Vinyl Liner Pool Conversion

Vinyl liner pools carry a $3,500–$6,000 replacement cost every 7–10 years — a recurring expense that compounds significantly over a 20-year ownership period. West Texas UV and Abilene's temperature swings shorten liner life further than national averages. A fiberglass conversion eliminates this cycle entirely. Hexagon prepares the existing pool shell structure, repairs any underlying damage, and installs a permanent fiberglass interior that requires no future liner replacements.

$3.5–6k liner replacement cost eliminated forever
Underlying shell damage repaired before application
Non-porous surface — no liner wrinkling or tearing
Payback period 8–10 years on average Abilene pools

Full System Upgrade

Concrete Block Pool Conversion

Older concrete block pool shells — found on some Abilene lots with pools built in the 1970s and 1980s — are particularly vulnerable to mortar degradation and water infiltration in caliche clay environments. Hexagon waterproofs and stabilises the block structure before applying fiberglass, creating a sealed, unified interior surface that stops water migration and restores the pool to full structural integrity.

1970s–80s Abilene block structures assessed and stabilized first
Mortar joints sealed against caliche moisture infiltration
Water migration behind shell permanently stopped
Preserves original decking — viable alternative to full demolition

Premium Upgrade

Fiberglass-to-Fiberglass Conversion

An existing fiberglass pool with a failing original surface — osmotic blistering, deep spider cracks, severe oxidation from Abilene's intense UV, or delamination — is a strong fiberglass conversion candidate. Rather than attempting a patch-and-repair cycle on a compromised gel coat, Hexagon removes the failed surface layer, inspects and repairs the structural shell, and applies a fresh HEXConvert™ or Fibre Tech™ system. The result is a pool that performs identically to a new fiberglass installation, with full warranty coverage.

Failed gel coat — including 240 mg/L calcium deposits — fully removed
Shell structural inspection confirms Taylor County caliche-stressed shell integrity
Full warranty — transfers at Dyess AFB PCS closing, documented at title
Preferred over repeated patch repairs on West Texas aging shells

Why Abilene Homeowners Choose Conversion Over Continued Maintenance

The financial case for conversion is straightforward when you compare the cumulative cost of maintaining a traditional surface in Abilene's hard water environment against the one-time cost of a permanent fiberglass system.

No Excavation. No Disruption.

The entire conversion is performed from inside the pool. No digging, no equipment on your lawn, no damage to decking, irrigation, or landscaping. For Abilene properties with established trees, irrigation systems, and outdoor living spaces, this is non-negotiable. Hexagon has never required ground disturbance for a conversion project.

The 20-Year Financial Case

An Abilene pool on a traditional plaster or vinyl liner cycle costs $47,000–$77,000 over 20 years in surface maintenance, hard water treatments, and caliche-driven repairs. A one-time fiberglass conversion costs $10,000–$18,000 and requires no further surface work within the warranty period. The savings — $29,000–$59,000 — is the conversion's return on investment over a 20-year horizon.

Hard Water Chemistry Relief

Abilene's 240+ mg/L water supply means every pool owner fights calcium scaling year-round. Fiberglass's non-porous surface doesn't provide anchor points for calcium — reducing chemical treatment frequency by up to 45% and eliminating the acid washing cycles that damage porous surfaces. Conversion converts a chemistry problem into a solved problem.

Your Conversion System: HEXConvert™ or Fibre Tech™

Both systems deliver a permanent fiberglass interior. Your choice determines warranty depth and transferability.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest completion — 7-day average
Ideal for long-term owners with no near-term sale plans
White or light blue standard — other colors available at an upcharge

Best for: owners focused on maximizing long-term value and minimizing time out of the pool.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — a documented resale asset
Preferred for owners with a 5–10 year sale horizon
White or light blue standard — other colors available at an upcharge

Best for: owners planning to sell — the transferable warranty adds a tangible, documented value to the listing.

Caliche Cracks and 240 mg/L Water Demand a Permanent Solution

Hexagon assesses your Abilene pool's caliche-site structural condition, confirms whether your shell is a resurfacing or conversion candidate, and gives you a fixed-price quote. No excavation. No disruption to established landscaping. Done in 7–10 days.

Get Your Free Conversion Assessment

Existing Fiberglass Pools

Re-Gelcoat Restoration

Already have a fiberglass pool? Abilene's 100°F+ heat, intense West Texas UV, and hard water combine to accelerate gel coat degradation faster than most Texas markets. Re-gelcoating restores your pool to a premium finish without shell replacement.

Fraction of the cost of full pool replacement
Color-matched or upgrade to a modern premium finish
Restores UV protection and chemical resistance
Addresses spider cracks and blistering simultaneously
Extends pool life by 15–20 years

3–5 Day Turnaround Color-Matched

Get a Re-Gelcoat Assessment

Full Gel Coat Restoration

Complete color-matched refinish — spa and pool surface unified.

Oxidation & Fade Removal

Restores West Texas sun-faded fiberglass to premium original gloss.

Spider Crack Filling

Clay-movement cracks filled and color-matched before gelcoat.

Blister & Delamination Fix

Blisters ground out, base repaired, gelcoat applied over top.

What Is Pool Gel Coat — and Why Do Abilene Fiberglass Pools Need Repair?

Gel coat is the outermost finish layer of a fiberglass pool — the resin-based surface that provides color, gloss, and chemical resistance. In Abilene, it is the only barrier between your pool's structural shell and two of the most aggressive enemies a fiberglass surface faces anywhere in Texas: municipal water at 240 mg/L hardness that deposits calcium scale on any surface that is not perfectly non-porous, and West Texas UV intensity that exceeds an index of 8 throughout peak season. When Abilene gel coat fails, it fails faster and harder than in most Texas markets.

Abilene's pool season runs May through October — six months of relentless UV exposure at an index regularly exceeding 8, combined with temperatures that top 100°F for weeks at a stretch. Municipal water at 240 mg/L deposits aggressive calcium scale on gel coat surfaces, dulling gloss and creating roughness that traps algae and resists cleaning. South-facing pools under Abilene's open West Texas sky compound oxidation year over year. Left unaddressed, degraded gel coat exposes the structural laminate to chemical penetration, which turns a cosmetic issue into a structural one.

Signs Your Abilene Pool Needs Gel Coat Repair

Faded, chalky, or dull finish — color no longer vibrant
Spider cracks on pool floor, walls, or around fittings
Osmotic blisters — raised bubbles on the pool surface
Rough or sandpaper texture in previously smooth areas
Visible delamination — gel coat separating from shell
Persistent staining despite correct water chemistry
Patchy color inconsistency across pool and spa surfaces
Pool is 10+ years old and has never had a gel coat service

Pool Gel Coat Repair Services in Abilene, TX

Hexagon diagnoses the root cause of every gel coat issue before beginning work — Abilene's caliche clay, extreme hard water, and West Texas UV each produce distinct failure patterns that require different repair approaches. All work is color-matched to your existing finish or upgraded to a premium modern color.

Most Comprehensive

Full Gel Coat Restoration

When oxidation, fading, and minor surface damage are widespread across the pool, a full gel coat restoration is the most cost-effective approach. Hexagon mechanically prepares the entire surface, addresses all underlying defects, and applies a fresh, UV-stabilized gel coat layer across the pool and spa as a unified refinish. The result is a pool that looks, feels, and performs as it did when first installed — with a color-matched or upgraded finish.

Complete pool and spa surface unified under new coat
Mechanically prepared — not chemically stripped
UV inhibitors in new gel coat resist West Texas sun degradation
Choice of color match or premium color upgrade

Abilene Most Common

Oxidation & UV Fade Repair

Oxidation is the most common gel coat issue on Abilene pools — caused by sustained West Texas UV exposure breaking down the resin polymers in the gel coat surface. The finish loses its gloss, turns chalky white or gray, and becomes increasingly porous. In Abilene, a porous surface compounds the problem: 240+ mg/L hard water fills those pores with calcium scale, creating a rough, discolored surface that resists every cleaning attempt. Hexagon's oxidation treatment removes the degraded surface layer, restores chemical resistance and UV protection, and brings the original color back to a like-new standard.

Chalky, dull finish restored to original gloss
Porous oxidized layer removed — not polished over
Hard water scaling risk eliminated with fresh non-porous coat
Effective on all fiberglass pool colors and ages

Caliche Soil Related

Spider Crack Repair

Spider cracks in fiberglass gel coat are a direct consequence of ground movement — and Abilene's caliche clay loam, which expands with moisture and contracts sharply in drought, produces significant seasonal ground movement throughout Taylor County. Spider cracks typically radiate from stress points: fittings, steps, corners, and floor areas above caliche expansion zones. Hexagon repairs spider cracks by grinding out each crack to sound material, filling and laminating the substrate, then applying a color-matched gel coat patch that is invisible under water.

Caliche movement root cause identified before repair
Each crack ground to sound substrate — not filled over
Structural laminate repaired beneath the gel coat
Color-matched finish — invisible under water

Hard Water Related

Osmotic Blister Repair

Osmotic blistering occurs when water molecules penetrate a compromised gel coat and accumulate between the gel coat and the fiberglass laminate, forming raised bubbles on the pool surface. In Abilene, the exceptionally high mineral content of the municipal water supply — particularly elevated calcium and magnesium at 240 mg/L — accelerates the osmotic process in ways that softer-water markets don't experience. Hexagon repairs blisters by opening each blister, cleaning the underlying cavity, rebuilding the laminate substrate, and applying gel coat over the repaired area. Hard water chemistry guidance specific to Abilene's water supply is provided to prevent recurrence.

Every blister opened, cleaned, and rebuilt — not flattened
Underlying laminate damage addressed before gel coat
Abilene hard water chemistry guidance on completion
Prevents escalation to full delamination

Why Abilene Homeowners Should Not Delay Gel Coat Repair

Gel coat issues follow a predictable escalation path in Abilene's conditions. What begins as a cosmetic problem — fading, minor cracking — becomes a structural and chemical problem if left unaddressed.

Cosmetic → Structural

Spider cracks that remain unfilled allow water to penetrate to the fiberglass laminate. Once water reaches the laminate in Abilene's caliche clay environment, hydrostatic pressure cycles cause delamination — separating the gel coat from the shell in sheets. A $400 crack repair becomes a $4,000 delamination job within two to three West Texas seasons.

Hard Water Acceleration

Abilene's 240+ mg/L hard water enters any crack or porous area and deposits mineral scale. This scale expands the crack from within, pushing gel coat away from the substrate. A hairline crack that would be a minor repair in a soft-water market becomes a significant structural issue in Abilene within a single season. Early repair stops the mineral infiltration cycle before it compounds.

Resale Presentation

In Abilene's competitive real estate market, pool condition is a visible factor in buyer perception. A professionally restored gel coat — documented, warranted, and visually premium — positions the pool as an asset rather than a negotiation point in a listing. A faded or cracked pool surface in a buyer's walkthrough becomes an immediate price reduction request.

What to Expect: The Gel Coat Repair Process

Most Abilene gel coat repair projects complete in 3–5 days. Full restorations on pools with integrated spas typically take 5–7 days. No excavation, no heavy equipment, no disruption to your outdoor living space.

Day 1

Assessment & Drain

Hexagon technician inspects the full pool and spa surface under water and dry conditions. Failure type, extent, and root cause confirmed. Pool drained and surface allowed to dry before work begins.

Days 2–3

Surface Preparation

Defects addressed at substrate level — cracks ground and laminated, blisters opened and rebuilt, oxidized surface mechanically abraded. All preparation work is inspected before gel coat is applied.

Days 3–5

Gel Coat Application

Color-matched or upgraded gel coat applied in controlled layers across all repaired and restoration areas. Spa and pool surface unified under the same finish. Edge-to-edge blending ensures no visible repair lines.

Days 5–7

Cure, Polish & Handover

Gel coat cures under West Texas ambient conditions. Surface buffed to premium gloss. Full inspection completed. Hard water chemistry guidance provided. Warranty documentation issued at handover.

Restore Your Abilene Pool to Premium Condition

Hexagon assesses your fiberglass pool's gel coat, identifies every defect, and provides a fixed-price repair quote. Most jobs complete in 3–5 days — no disruption to your property.

Get Your Free Gel Coat Assessment

3–5 Day Turnaround

Fiberglass Pool Repair

Abilene's caliche clay soil, 240+ mg/L hard water, and 100°F+ West Texas summers create fiberglass-specific challenges. Hexagon diagnoses and resolves the root cause — not just the surface symptom — and warrants the result.

Our fiberglass pool repair resolves cracks, leaks, and delamination at the source — not with another short-lived patch.

All repairs color-matched to existing finish
Structural repairs address clay and root movement root cause
Most jobs completed in 3–5 days
Up to 5-year warranty on structural repair work

3–5 Day Turnaround Up to 5-Yr Warranty

Schedule a Repair Assessment

Gel Coat Restoration

Color-matched fiberglass refinishing.

Structural Repair

Spider crack elimination.

Osmotic Blister Repair

Comprehensive surface restoration.

Complete Refinishing

Full surface renewal, extended life.

Why Fiberglass Pool Repair in Abilene Requires a Different Approach

Fiberglass pool repairs are not interchangeable with plaster or concrete repairs — and Abilene's conditions make the distinction critical. The two dominant forces acting on Abilene pools are caliche clay loam soil in Taylor County, which expands and contracts significantly with every rain-drought cycle, and Abilene municipal water at 240 mg/L hardness, which deposits mineral scale in every crack, blister, and porous surface — accelerating failure from the inside. A repair that does not account for both forces will fail again within one to two West Texas seasons.

Hexagon's repair process begins with a root-cause assessment, not just a visual surface inspection. We identify whether damage originates from soil movement, water chemistry, hard water infiltration, or structural fatigue — and address the underlying cause before applying any surface repair. Every repair is color-matched to your existing gel coat and warranted, so the finished result is invisible underwater and backed in writing.

Pool Problems That Need Immediate Attention

Visible cracks on pool floor, walls, or around fittings
Water loss exceeding ¼ inch per day (beyond evaporation)
Skimmer pulling air — cracked housing or broken neck
Return fittings loose, leaking, or showing separation
Step or bench delamination pulling away from shell
Bowing or bulging in pool walls (soil pressure)
Repeated algae bloom despite correct chemistry
Equipment pad flooding — possible shell or plumbing leak

Pool Repair Services in Abilene, TX

From hairline gel coat cracks to structural shell repairs and full skimmer replacements, Hexagon handles every repair type found on Abilene pools — root-cause first, warranty-backed, color-matched to your finish.

Most Requested — Caliche Soil

Structural Crack Repair

Structural cracks in fiberglass pools are the direct result of ground movement — and Abilene's caliche clay loam is highly active across Taylor County's seasonal moisture swings. Cracks typically appear on the pool floor above caliche expansion zones, around fittings under directional soil pressure, and along walls where the soil dries hardest in Abilene's drought periods. Hexagon repairs structural cracks by excavating to the outer shell face where necessary, applying fiberglass laminate to restore structural integrity, and finishing with a color-matched gel coat. The root cause — caliche load, drainage, or hard water infiltration — is documented and addressed as part of the repair scope.

Taylor County caliche expansion confirmed and documented as root cause
Laminate repair restores structural integrity on caliche-stressed Abilene shells
Color-matched gel coat — invisible under water
Up to 5-year warranty on all structural crack repairs

Abilene Common

Skimmer Repair & Replacement

Skimmer failure is one of the most common repair calls on Abilene pools — and one of the most consequential if ignored. The skimmer housing is bonded to the pool shell at the waterline, a location that experiences the highest concentration of thermal cycling, caliche movement, and West Texas UV exposure. Cracks at the skimmer neck or housing allow water to bypass the skimmer seal and migrate behind the shell, where it interacts with Abilene's hard water minerals to create scale buildup and sustained hydrostatic pressure. Hexagon repairs cracked skimmer housings, replaces failed skimmer bodies, reseals skimmer-to-shell bonds, and installs upgraded skimmer units where the original fitting is beyond repair.

Cracked skimmer neck repaired or housing replaced
Skimmer-to-shell bond resealed — caliche thermal contraction is a primary waterline failure driver
Upgraded skimmer units available for Abilene's 1980s–90s era pool inventory
Repair stops hard water mineral infiltration behind the shell face

Water Loss Related

Fitting & Return Line Leak Repair

Return fittings, main drain covers, light housings, and spa jets are all penetration points in the fiberglass shell — and each is a potential leak source as sealants age and caliche soil movement applies shear force to bonded fittings. In Abilene, hard water mineral deposits at fitting seals can mask early-stage leaks until they are well established. Hexagon performs a systematic pressure test and dye test to locate all active leaks, then repairs or replaces the affected fittings and reseals the shell penetration to current standards.

Pressure and dye test locates all active leak points
Fitting replacements use current-standard components
Shell penetrations resealed — not just re-caulked
Water loss confirmed resolved before pool is refilled

Soil Pressure

Step, Bench & Ledge Repair

Steps, benches, tanning ledges, and spa walls are the structural elements most vulnerable to delamination and cracking on Abilene pools. Taylor County's caliche clay exerts upward pressure on horizontal surfaces as it expands with rainfall — steps and ledges are most exposed — causing separation between the fiberglass laminate layers. Hexagon repairs delaminated steps and ledges by re-bonding the separated layers, applying structural reinforcement where needed, and finishing with a color-matched gel coat.

Delaminated layers re-bonded — not patched over
Caliche pressure load assessed and documented
Structural reinforcement applied on high-stress surfaces
Step and ledge surfaces color-unified on completion

Repair or Replace? Hexagon's Honest Assessment

Not every repair is worth making — and not every damaged pool needs replacing. Hexagon provides an honest structural assessment of every pool before quoting, with a clear recommendation based on what actually makes financial sense for the property.

When Repair Is the Right Call

Isolated structural cracks with no shell delamination, single skimmer failure, fitting leaks on an otherwise sound shell, and step or ledge repairs on a pool with a good underlying structure are all strong repair candidates. A targeted repair on a sound fiberglass shell typically extends pool life by 10–15 years at a fraction of resurfacing cost.

When Resurfacing Makes More Sense

When a pool has multiple simultaneous failure types — cracks, blistering, oxidation, and fitting leaks together — the cumulative repair cost often approaches resurfacing cost. In those cases, Hexagon recommends resurfacing over piecemeal repair: one fixed price, one process, a new surface, and a full warranty rather than multiple partial warranties on individual repairs.

When the Shell Needs Replacing

Severe shell delamination, hydrostatic uplift (the pool shell has floated), or widespread structural failure from sustained root intrusion are cases where repair is not viable. Hexagon will tell you directly when this is the situation — and provide a full replacement or conversion quote rather than charge for repairs that will not hold.

What to Expect: The Pool Repair Process

Most pool repair projects in Abilene complete in 3–5 days. Structural repairs involving excavation or skimmer replacement may extend to 7 days. No heavy equipment on your lawn — all work performed from pool deck level.

Day 1

Diagnosis & Drain

Root-cause assessment of all damage — pressure test, dye test, visual inspection dry and wet. Repair scope confirmed. Pool drained and surface dried before structural work begins.

Days 2–3

Structural Work

Crack repair, skimmer replacement, fitting resealing, or laminate reinforcement completed at shell level. All structural work inspected and approved before gel coat phase begins.

Days 3–4

Gel Coat Finishing

Color-matched gel coat applied over all repair areas. Blended edge-to-edge for an invisible finish. Skimmer surrounds and fitting flanges refinished to match surrounding surface.

Days 4–5

Refill & Warranty

Pool refilled and water chemistry balanced. All repair work documented. Warranty issued — up to 5 years on structural repairs. Final walkthrough confirms every issue resolved.

Don't Let a Small Repair Become a Costly Replacement

Hexagon assesses your Abilene pool, identifies every repair need, and gives you an honest recommendation — repair, resurface, or replace. Fixed-price quote, root-cause approach, warranted result.

Get Your Free Pool Repair Assessment

Whatever the failure mode, our pool repair starts with a root-cause diagnosis before any material touches the shell.

Why Abilene Pools Benefit from Fiberglass

The Standard Your Investment Deserves

Hard Water

240 mg/L Very Hard Water

Abilene's municipal water averages 240 mg/L calcium carbonate — 14 grains per gallon, classified as very hard by USGS standards. These dissolved minerals aggressively scale any porous pool surface. Plaster, marcite, and pebble finishes provide abundant anchor points for calcium, requiring constant acid washing that shortens the surface life with every cycle.

Fiberglass is non-porous — calcium has no surface to grip
Up to 45% reduction in chemical treatments needed
Acid washing cycles eliminated permanently
Glass-smooth surface wipes clean — no scaling buildup

Caliche Soil

Taylor County Caliche Clay

Abilene sits on caliche clay loam — a Taylor County soil that swells with seasonal rainfall and contracts hard during West Texas drought periods. This movement cracks rigid pool surfaces from underneath, and the hard water that enters those cracks deposits scale that widens them further with every rain cycle.

Caliche movement cracks rigid plaster and gunite repeatedly
Hard water infiltrates cracks and accelerates failure
Fiberglass flexes with seasonal soil movement
No cracking — regardless of drought or rainfall shifts

West Texas Heat

100°F+ Summers & Intense UV

Abilene summers regularly exceed 100°F with a long May–October pool season under West Texas's high-altitude UV intensity. Pools in constant use face sustained UV exposure, thermal cycling, and chemical load that accelerates traditional surface degradation faster than Dallas or Houston markets.

UV oxidizes and fades plaster and marcite year over year
Fiberglass gel coat contains UV inhibitors — resists fading
Thermal cycling cracks rigid surfaces between seasons
Fiberglass flexes with temperature extremes — no cracking

Military Community

Dyess AFB & Abilene's Military Families

Dyess Air Force Base makes Abilene home to thousands of active duty, reserve, and retired military families. Hexagon is proud to offer veterans discounts and understands the demands military families place on long-term value — a fiberglass pool with a 25-year transferable warranty is an asset that outlasts any PCS cycle.

Veterans & active duty discount available — ask for details
25-year transferable warranty adds value at resale
Full warranty paperwork and completion documentation at handover
Non-disruptive installation — minimal time out of the pool

Result: For Abilene pools, fiberglass isn't a premium upgrade — it's the only surface engineered to outlast the hard water, caliche soil, and West Texas heat that destroy every traditional alternative.

Our Abilene Fiberglass Process

From Drain to Swim in Under 2 Weeks

Day 1

Assessment & Drain

Technician confirms system selection
Pool drain coordinated on-site
Landscaping and hardscape protection plan agreed
HEXConvert™ or Fibre Tech™ confirmed

Days 2–3

Surface Preparation

Existing surface cleaned, etched, and profiled
Clay and root-driven structural cracks resolved
Equipment access routes protect landscaping throughout

Days 4–6

System Application

Applied in multiple layers by certified technicians
Hand-crafted to every contour — pool, spa, steps, ledges
Quality checkpoints throughout

Days 7–8

Cure & Inspection

Cures under controlled conditions
West Texas summer heat accelerates the cure phase
Full quality inspection before refill authorized

Days 9–10

Refill & Warranty

Pool refilled, water chemistry balanced
Hard water chemistry guide and warranty paperwork delivered
HEXConvert™: 10-yr comprehensive — starts day one
Fibre Tech™: 25-yr material — transfers with the property

No demolition required · Landscaping protected throughout · Hard water chemistry guide provided at completion

Schedule Your Assessment

Why Abilene Chooses Hexagon

Fiberglass specialists — meeting Abilene's standard

West Texas Hard Water Expertise

Trained on Abilene's 240 mg/L hard water conditions
Surface prep accounts for existing hard water scale
Chemistry guidance specific to Abilene's water supply provided at handover

Full-Scale Capability

Equipped for pools of every size and complexity
Spa, water feature, and tanning ledge expertise
Landscaping and hardscape protection protocol

Industry Recognition

Texas Pool & Spa Association certified
Certified Pool Operators on every project
$2M liability insurance

Exclusive Technology

HEXConvert™ proprietary to Hexagon
Exclusive Fibre Tech™ materials
Methods developed over 3 decades
Factory direct quality assurance

Our Abilene Service Area

Proudly serving Abilene and surrounding areas within a 30-mile radius.

(972) 789-2983Click to call

Abilene Neighborhoods We Serve

Serving homeowners across Abilene and Taylor County

Central / Elmwood

Elmwood & South 14th

Elmwood South 14th Corridor College Heights Sayles Boulevard

Specialty Established mid-century neighborhoods with older gunite pools ripe for fiberglass conversion

Challenge Original 1960s–1980s pool shells with decades of caliche and hard water damage

Northwest / Wylie

Wylie Area & Northwest Abilene

Wylie ISD Area Northwest Abilene Buffalo Gap Road Antilley Road Corridor

Specialty Newer construction pools with hard water scaling and caliche-driven early surface wear

Challenge Caliche expansion and hard water scaling affecting pools within 5–10 years of installation

South / Dyess Area

Dyess AFB & South Abilene

Dyess AFB South Abilene Lytle Area Southwest Drive Corridor

Specialty Military community expertise — veterans discounts, transferable warranties for PCS moves

Challenge High turnover requires warranty documentation that transfers clearly at closing

East / Tye

East Abilene & Tye

East Abilene Tye Merkel Road Area Industrial Boulevard Corridor

Specialty Acreage properties and rural lots with older pool structures

Challenge Deeper caliche profiles and variable soil drainage requiring root-cause assessment before repair

Service Area

All Abilene neighborhoods covered

Every Abilene neighborhood — central or suburban, established or newer — receives the same quality standards, materials, and warranty protection. Hard water chemistry guidance is included for every job, regardless of location.

Confirm Your Coverage

Abilene Success Stories

Real Results from Your Neighbors

Elmwood Neighborhood

Hard water scaling — finally over

I spent $800 a year on chemicals just fighting Abilene's hard water. The pool still looked terrible every summer — white scale on everything, algae that wouldn't quit. Hexagon converted the pool to fiberglass and the difference is night and day. First summer: no scale, no algae, half the chemicals. The investment paid for itself faster than I expected.

David & Karen Whitfield, ElmwoodPool Age: 19 years · HEXConvert™ 10-yr warranty · Investment: $16,200

Dyess AFB Community

Transferable warranty made the difference at closing

We knew we'd be PCS'ing within three years. The Fibre Tech™ 25-year transferable warranty was the deciding factor — it's a documented asset that goes with the house. Our buyers' agent specifically called it out as a selling point. The pool looked brand new and came with paper to prove it.

Staff Sgt. Marcus & Tanya Reynolds, Dyess AreaFibre Tech™ warranty transferred at closing · Investment: $14,800

Wylie Area

Caliche cracking — solved permanently

We had repaired the same crack on our pool floor three times in six years. Each time the contractor said it was the soil — patch it and wait for it to come back. Hexagon was the first company that actually fixed the cause. Two West Texas summers since the conversion and not a single crack. My only regret is not calling them sooner.

Greg & Paula Simmons, Wylie AreaPool Age: 14 years · HEXConvert™ 10-yr warranty · Investment: $15,500

South Abilene

Done in 8 days — back in the pool before Labor Day

We called in late July thinking we'd be out for the rest of the summer. Hexagon assessed and scheduled us within a week. Eight days total — drained, converted, refilled, swimming. My kids were back in the pool before Labor Day weekend. The finish is stunning and the pool has never been easier to maintain.

James & Rebecca Thornton, South AbilenePool with spa · Fibre Tech™ 25-yr warranty · Investment: $18,900

Investment Analysis

What Fiberglass Actually Costs You Over Time

Abilene homeowners who switch to fiberglass save an average of $13,500 over 15 years compared to the traditional replaster cycle.

Cost Item	Plaster (15 yrs)	Fiberglass (15 yrs)
Resurfacing / Replaster	$14,000–$18,0002 replasters	$0
Annual Chemical Costs	$1,000–$1,300/yr	$500–$650/yr50% less
Algae Treatment & Cleanup	$350–$450/yr	$100–$125/yr
Surface Repairs	$1,300–$1,700 over life	Warranty covered
15-Year Total Cost	$35,000–$46,000	$23,000–$31,000

Estimates based on Taylor County market averages. Actual savings vary by pool size and condition.

Average Abilene Homeowner Saves

$13,500

over 15 years by switching from plaster to fiberglass — one of the most cost-effective long-term decisions for your pool.

Calculate My Savings

Frequently Asked Fiberglass Pool Questions

Fiberglass resurfacing in Abilene typically ranges from $12,000–$19,000 depending on pool size, condition, and system choice. HEXConvert™ and Fibre Tech™ both deliver far better long-term value than traditional replastering ($8,000–$12,000 every 5–7 years). Abilene's extremely hard water (240 mg/L) accelerates plaster degradation, making fiberglass an even smarter investment — eliminating the acid wash cycle and the recurring resurfacing costs over 20 years.

Abilene's municipal water averages 240 mg/L calcium carbonate (14 grains per gallon) — classified as very hard. This mineral-heavy water from O.H. Ivie Reservoir stains plaster white, etches concrete, and builds thick scale on tile within months. Fiberglass is non-porous: minerals cannot penetrate the surface. Both HEXConvert™ and Fibre Tech™ eliminate staining, dramatically reduce chemical consumption, and remove the need for annual acid washing.

Yes. Abilene's caliche-heavy clay loam soil expands and contracts with West Texas drought and rain cycles — and it shifts under pools during the dry summers that regularly follow wet springs. Rigid plaster and concrete surfaces crack under this movement. Both our HEXConvert™ and Fibre Tech™ fiberglass systems are engineered to flex with ground movement, preventing the structural fractures that require constant costly repairs on traditional surfaces.

Significantly. Abilene summers regularly hit 100°F+ with UV index readings of 7 (high health risk) from May through August. Traditional plaster and marcite oxidize, fade, and become rough under this UV intensity. Fiberglass gel coat contains UV inhibitors that resist fading and oxidation. Both HEXConvert™ and Fibre Tech™ maintain their color and smooth surface integrity across Abilene's extreme thermal cycles — from 100°F summers to occasional ice events.

Abilene's history of drought cycles (2011 was the worst on record) means the city periodically activates water conservation stages that restrict landscape irrigation and pool filling. Fiberglass resurfacing can be planned around restriction cycles — our team schedules drains responsibly and coordinates with city conservation guidelines. Once installed, fiberglass surfaces reduce evaporation loss compared to porous traditional surfaces, lowering water consumption over the long term.

Properly installed fiberglass surfaces last decades even in Abilene's demanding climate. HEXConvert™ includes a 10-year comprehensive warranty covering both materials and labor. Fibre Tech™ provides a 25-year material warranty. Both systems are engineered to perform through West Texas heat, UV intensity, hard water, and caliche soil conditions — eliminating the traditional 7-year replastering cycle completely.

Yes. We serve all Abilene neighborhoods including Potosi, Wylie, Elm Creek, Southridge, North Abilene, South Abilene, and the Dyess AFB vicinity, as well as surrounding communities in Taylor County. Every zip code receives the same quality installation, materials, and warranty protection.

Most projects complete in 7–10 days. Abilene's summer heat actually accelerates the cure phase — warm temperatures speed the fiberglass bonding process. Occasional spring storms may delay outdoor prep work, but our crews plan around West Texas weather patterns and continue preparation phases indoors when possible. No demolition means no multi-week project timelines.

Positively. Fiberglass's non-porous surface resists the calcium scaling that Abilene's 240 mg/L hard water causes on plaster. Algae cannot embed in the smooth surface, reducing sanitizer demand. Most Abilene clients see chemical costs drop 40–50% after conversion. Our startup procedures are calibrated specifically for West Texas water chemistry to optimize the surface from day one.

Absolutely. We offer a full range of color options for both HEXConvert™ and Fibre Tech™ — from classic aqua blue to modern arctic white, slate gray, and deep sapphire. Many Abilene clients choose colors that complement their stucco or brick exteriors and West Texas landscaping. We provide physical color samples for approval before any work begins.

HEXConvert™ offers 10-year comprehensive coverage (labor and materials) — ideal for homeowners wanting complete protection and maximum peace of mind. Fibre Tech™ provides a 25-year material warranty and transfers to new owners, making it attractive if you're planning to sell. Both deliver identical smooth, hard water–resistant, algae-resistant surfaces. We'll help you choose based on your priorities and pool condition during your free assessment.

HEXConvert™ Resurfacing is our proprietary fiberglass resurfacing system. We bond a multi-layer fiberglass-and-gelcoat surface over your existing concrete, gunite, or plaster shell to create one continuous, non-porous, factory-smooth finish. Unlike plaster — which has to be redone every 7–10 years — a HEXConvert™ surface is a one-time installation backed by a 10- or 25-year warranty.

Re-Gel is the gelcoat-renewal stage of the HEXConvert™ system. We apply a fresh, color-matched gelcoat over the fiberglass to restore the smooth, glossy finish and protect it against UV, pool chemicals, and everyday wear — bringing an existing fiberglass surface back to like-new condition without a full rebuild.

Fiberglass lasts 25+ years vs 7-10 for plaster, reduces chemical usage by 75%, prevents algae growth, and never needs acid washing.

Our 25-year warranty covers the fiberglass shell against structural defects, delamination, blistering, and fading. It's transferable to future homeowners.

Both deliver the same smooth, permanent fiberglass surface — the difference is the warranty. HEXConvert™ is our proprietary system with a 10-year comprehensive (labor and materials) warranty and the fastest install. Fibre Tech™ carries a 25-year transferable material warranty, ideal if you may sell since it follows the home. We'll help you choose at the consultation.

Yes! Pool conversion works excellently for old or damaged pools. In fact, conversion is often the best solution for aging pools with cracks, surface deterioration, or structural issues. Our Fibre Tech™ system bonds directly to your existing concrete/gunite structure and can bridge minor cracks while providing structural reinforcement. We've successfully converted pools that are 30+ years old. During your free consultation, we'll assess your pool's condition and recommend the best approach for your specific situation.

Yes! Our Fibre Tech™ technology is custom-molded to fit any pool shape and size, from standard rectangles to custom freeform designs.

Your pool will look better! You can choose from various colors and the smooth gel-coat surface is more attractive than weathered plaster.

Absolutely! Fiberglass is completely salt-resistant, unlike concrete which can deteriorate from salt exposure.

Usually no. Most existing equipment works perfectly with fiberglass. We'll assess during consultation and recommend upgrades only if beneficial.

LIMITED TIME — Abilene Fiberglass Special

Save $1,000 on Your Pool Conversion

Book your Abilene fiberglass assessment before July 4, 2026

$1,000 OFFany conversion over $12,000

Complimentarypool assessment ($500 value)

0% Financingfor 18 months (qualified buyers)

Priority Summer Schedulingback in the pool before Labor Day

Exclusive to Abilene fiberglass projects. Veterans & active military receive additional discount — ask when you call. Limited appointments available.

Start Your Transformation — 972-789-2983

PREMIUM FIBERGLASS SOLUTIONS

End the Hard Water Battle. Stop the Caliche Cracking.

Choose HEXConvert™ (10-year) or Fibre Tech™ (25-year transferable) — engineered for Abilene's hard water, caliche clay, and West Texas heat.

Call Now for Free Quote972-789-2983 Get Online Quote60-Second Form

Hexagon Fiberglass Pools · Abilene Pool Fiberglass Specialists · HEXConvert™ & Fibre Tech™ Certified · Veterans & Military Discounts · $2M Insurance

Abilene Fiberglass Pool Repair & Resurfacing 7-10 Day Install

Get Your Complimentary Abilene Quote

Abilene Pool Services

Fiberglass Pool Resurfacing

Fiberglass Pool Conversion

Re-Gelcoat Restoration

Fiberglass Pool Repair

Why Abilene Pools Benefit from Fiberglass

240 mg/L Very Hard Water

Taylor County Caliche Clay

100°F+ Summers & Intense UV

Dyess AFB & Abilene's Military Families

Our Abilene Fiberglass Process

Assessment & Drain

Surface Preparation

System Application

Cure & Inspection

Refill & Warranty

Why Abilene Chooses Hexagon

West Texas Hard Water Expertise

Full-Scale Capability

Industry Recognition

Exclusive Technology

Our Abilene Service Area

Abilene Neighborhoods We Serve

Elmwood & South 14th

Wylie Area & Northwest Abilene

Dyess AFB & South Abilene

East Abilene & Tye

All Abilene neighborhoods covered

Abilene Success Stories

What Fiberglass Actually Costs You Over Time

Frequently Asked Fiberglass Pool Questions

1 What is the average cost of pool resurfacing in Abilene?

2 How does Abilene's hard water affect traditional pool surfaces?

3 Can fiberglass withstand Abilene's caliche soil?

4 Does extreme West Texas heat affect fiberglass differently than plaster?

5 How do drought conditions and water restrictions affect pool resurfacing timing?

6 What is the life expectancy of a fiberglass resurfaced pool in Abilene?

7 Do you serve neighborhoods throughout Abilene?

8 How long does fiberglass pool installation take in West Texas conditions?

9 Will fiberglass affect my pool's water chemistry management?

10 Can you match my existing pool's color or style?

11 Which fiberglass system is right for my Abilene pool?

12 What is HEXConvert™ Resurfacing?

13 What is HEXConvert™ Re-Gel?

14 What makes fiberglass better than plaster?

15 What's included in your 25-year warranty?

16 Should I choose HEXConvert™ or Fibre Tech™?

17 Will conversion work for an old or damaged pool?

18 Can you convert any pool shape?

19 Will my pool look different after conversion?

20 Is fiberglass safe for saltwater systems?

21 Do I need to replace my pool equipment?

Save $1,000 on Your Pool Conversion

End the Hard Water Battle. Stop the Caliche Cracking.