Fiberglass Pool Repair & Resurfacing Bee Cave

Bee Cave Pool Services

Complete fiberglass solutions for luxury pools of any size and complexity

Fiberglass Pool Resurfacing

Bee Cave's Hill Country pools were built to impress — but plaster and marcite can't survive Travis County's rocky substrate and WCPUA hard water without replastering every five to seven years. Fiberglass ends that cycle permanently and delivers the surface finish your property demands.

✓Permanent surface vs. recurring $12,000–$20,000 replastering
✓Glass-smooth — never rough, stained, or scaled again
✓Up to 45% reduction in chemical usage
✓Algae-resistant non-porous surface
✓Choice of 10-yr or 25-yr transferable warranty

7-10 Day Install 10 or 25-Yr Warranty HOA Documentation Included

Learn About Bee Cave Resurfacing

What Is Pool Resurfacing — and Why Does Your Bee Cave Pool Need It?

Pool resurfacing is the process of removing or overcoating your pool's existing interior finish and applying a new, durable surface layer directly to the shell. Every pool surface degrades over time — plaster chalks and stains, marcite roughens and scales, vinyl liners fade and tear. In Bee Cave, that degradation is accelerated by three compounding factors: Hill Country caliche and limestone substrate that can stress rigid finishes, WCPUA-supplied hard water (150–200 mg/L) that deposits calcium scale on porous surfaces, and a long, intense March–November pool season that subjects surfaces to sustained UV exposure and thermal cycling.

Left unaddressed, a failing pool surface becomes progressively more expensive. A rough plaster finish abrades swimmers and holds algae; stained or etched surfaces require repeated acid washing that removes surface material and shortens the replacement cycle; cracks and delamination allow water migration behind the shell, which — on a caliche and limestone substrate site — can cause hydrostatic pressure that damages the shell itself. Resurfacing before the surface reaches failure is always less expensive than remediation after it.

Signs Your Bee Cave Pool Needs Resurfacing

⚠ Rough or sandpaper texture on pool floor and walls
⚠ Persistent staining that acid washing no longer removes
⚠ Visible cracks, chips, or delaminating patches
⚠ Chalky white calcium deposits or efflorescence
⚠ Recurring algae despite correct chemical balance
⚠ Fading, discoloration, or uneven finish color
⚠ Unexplained water loss (surface micro-leaks)
⚠ Surface age over 7 years on plaster or marcite

Pool Resurfacing Services in Bee Cave, TX

Hexagon resurfaces every pool type found in Bee Cave — from aging plaster gunite pools in Falconhead and Lake Pointe to vinyl-liner pools in Bee Cave Woods. All paths lead to the same outcome: a permanent fiberglass surface engineered for Central Texas Hill Country conditions.

Most Common

Plaster & Marcite Pool Resurfacing

The majority of Bee Cave pools built before 2018 have white plaster or marcite interiors — surfaces that WCPUA's 150–200 mg/L Highland Lakes water begins etching from the day the pool is filled. On Bee Cave's 600–1,000 sq ft Hill Country pools, the 7–8 year replaster cycle means a recurring $9,000–$14,000 cost on a surface whose degradation rate WCPUA water chemistry controls, not the contractor. Hexagon removes the deteriorated surface, repairs all substrate drainage-related cracking in the gunite shell, and installs fiberglass — ending the cycle permanently before it compounds across future ownership.

✓ Replastering eliminated — not deferred, not rescheduled
✓ Substrate drainage and structural crack repair included in preparation
✓ Fiberglass bonds directly to Bee Cave's Hill Country gunite shells
✓ Glass-smooth finish meets the visual standard Spanish Oaks and Falconhead HOA committees require

Growing Demand

Pebble & Aggregate Finish Resurfacing

Pebble Tec, Pebble Sheen, and exposed-aggregate finishes were popular on Bee Cave pools built between 2005 and 2020, particularly in Falconhead and Lake Pointe where premium finishes were standard specifications. At 10–20 years old, these surfaces are now showing the effects of WCPUA's 150–200 mg/L Highland Lakes water — mineral scale packing into aggregate pockets faster than in softer-water markets, creating a rough texture that abrades swimmers and demands constant chemical correction. Fiberglass resurfacing eliminates the texture and the mineral infiltration mechanism simultaneously, delivering a smooth surface that meets Spanish Oaks and Falconhead community standards.

✓ Restores the premium resort aesthetic Spanish Oaks and Falconhead communities require
✓ Applied over existing aggregate — no decking or landscaping disruption
✓ Glass-smooth finish meets Spanish Oaks and Falconhead pool standards
✓ Unified surface across pool, spa, and tanning ledge

Vinyl Liner Pools

Vinyl Liner Pool Resurfacing

Vinyl liner pools in Bee Cave carry a $4,500–$7,500 replacement cost every 7–10 years, with no improvement to the underlying shell condition. In Spanish Oaks and Falconhead — communities where pool presentation is visible to neighbors and evaluated by HOA committees — a vinyl liner surface is also an aesthetic compromise inconsistent with community standards. Hexagon resurfaces vinyl liner pools by preparing the existing shell and applying a permanent fiberglass interior, delivering a seamless surface worthy of the surrounding property while ending liner replacement costs permanently.

✓ Liner replacement cycle ends permanently
✓ No ongoing $4.5–7.5k liner costs on Bee Cave's Hill Country pools
✓ Permanent non-porous surface — HOA-documentable and transferable
✓ Handles custom Bee Cave pool shapes, spas, infinity shelves, and tanning ledges

Existing Fiberglass

Fiberglass Pool Re-Resurfacing

Fiberglass pools 15–25 years old often show oxidation, gel coat fading, osmotic blistering, or spider cracking — particularly in Bee Cave where WCPUA mineral deposits accumulate on gel coat continuously and Central Texas Hill Country UV exposure runs eight months of the year. On properties in Spanish Oaks and Falconhead where outdoor presentation standards are part of HOA compliance, a deteriorating fiberglass surface carries consequences beyond maintenance cost. Hexagon grinds, repairs, and applies a fresh HEXConvert™ or Fibre Tech™ system — restoring a surface appropriate to the community standards of the surrounding neighborhood, with full warranty from day one.

✓ Restores pool surfaces dulled by Central Texas Hill Country UV and WCPUA mineral buildup
✓ Blisters and substrate-pressure spider cracks repaired before application
✓ Full warranty — meets Spanish Oaks and Falconhead documentation and HOA standards
✓ 15–20 year life extension on pools built for Bee Cave's Hill Country lots

Why Fiberglass Resurfacing — Not Replaster, Pebble Tec, or Epoxy Paint

Bee Cave homeowners are typically presented with four resurfacing options. Here is an honest comparison of how each performs in Central Texas Hill Country conditions over a 20-year ownership horizon.

Surface Type	Lifespan	20-Yr Cost	Hard Water	Clay Soil
White Plaster	5–7 yrs	$60k–$114k	Scales heavily	Cracks with movement
Marcite	6–8 yrs	$54k–$96k	Stains & scales	Cracks with movement
Pebble / Aggregate	8–12 yrs	$45k–$72k	Roughens quickly	Cracks with movement
Epoxy Paint	2–4 yrs	$70k–$100k+	Peels & blisters	Delamination risk
✓ HEXConvert™ / Fibre Tech™ Fiberglass	20–30 yrs	$14k–$22k	Non-porous — no scale	Flexes — no cracking

* 20-year cost estimates based on Bee Cave pool averages (600–1,000 sq ft). Includes material, labor, and chemistry costs per cycle.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

✓10-year comprehensive labor & materials warranty
✓Fastest installation path — 7 days typical
✓Ideal for pools staying with current owner 10+ years
✓Available in 8 premium color options

Best for: Bee Cave homeowners whose pools are approaching or at the first replaster milestone — the optimal window to convert before committing to a 7-year cycle that WCPUA hard water will run on schedule. One HEXConvert™ installation ends that cycle before it starts.

Industry Standard

Fibre Tech™

✓25-year transferable material warranty
✓Warranty transfers to next owner — adds resale value
✓Preferred for properties in HOA communities with resale plans
✓Available in 12 premium color options

Best for: Bee Cave homeowners preparing to list in a market where buyers arrive with thorough inspectors. In Spanish Oaks and Falconhead, a Fibre Tech™ 25-year transferable warranty converts the pool from an inspection risk into a documented asset — one that architectural committees and appraisers both recognize at closing.

Your Bee Cave Pool Deserves a Permanent Surface

Hexagon assesses your Bee Cave pool, confirms the right system for your HOA requirements and Hill Country conditions, and gives you a fixed-price quote — no surprises, no upsells, no replaster in 5 years.

Get Your Free Bee Cave Resurfacing Assessment

Save $20k–$40k lifetime

Fiberglass Pool Conversion

Vinyl liner, gunite, concrete, or aging fiberglass — Hexagon converts pools of any size and configuration to superior fiberglass without excavation. No disruption to your landscaping, decking, or outdoor living space.

Vinyl liner → fiberglass

Eliminates $5–8k annual liner replacement costs

Gunite → fiberglass

Permanently ends clay-driven structural cracking

Concrete → fiberglass

Stops the Central Texas maintenance cycle

Fiberglass restoration

Modern surface, extended life, transferable warranty

HEXConvert™

10-yr comprehensive warranty

Fibre Tech™

25-yr transferable warranty

Explore Bee Cave Conversion

What Is a Fiberglass Pool Conversion — and Is It the Right Choice for Your Bee Cave Pool?

A fiberglass pool conversion is a complete interior system change — transforming your existing pool from its current surface technology (vinyl liner, plaster, gunite, concrete) to a permanent, non-porous fiberglass shell. Unlike resurfacing, which preps and overcoats a surface that still has usable structure, conversion is the appropriate choice when the underlying system itself has reached the end of its viable life: when a vinyl liner pool has had two or more liner replacements, when a gunite shell has sustained repeated structural cracking from ground movement, or when the cost of continued maintenance now rivals the cost of a one-time permanent solution.

Critically, Hexagon performs fiberglass pool conversions without excavation and without disruption to your existing decking, landscaping, or outdoor living infrastructure. For Bee Cave properties — where Hill Country landscaping, custom hardscape, and HOA-governed exteriors make any ground disturbance costly and complicated — this is the deciding factor. The entire conversion is completed from inside the pool in 7–10 days, with zero contact with surrounding property.

You're a Conversion Candidate If…

✓ Your vinyl liner has been replaced once or more already
✓ Your gunite or concrete pool cracks recur after every repair
✓ Annual maintenance costs exceed $3,000 with no improvement
✓ Your pool surface has multiple simultaneous failure types
✓ You're planning a renovation and want a permanent solution
✓ Your pool is 15+ years old and has never had a system upgrade
✓ You want to eliminate all future resurfacing from your budget
✓ You're preparing the property for sale and want a warranty asset

Fiberglass Pool Conversion by Pool Type

Hexagon converts every pool type found in Bee Cave. The conversion method is tailored to the existing shell structure — but the outcome is always the same: a permanent, low-maintenance fiberglass interior with full warranty coverage.

Most Requested

Gunite & Shotcrete Pool Conversion

Bee Cave pools span multiple construction types and eras — gunite shells under degraded plaster in Falconhead's 2000s-era builds, vinyl liner pools approaching third-cycle costs in Lake Pointe, and first-generation fiberglass installations in established Bee Cave Woods properties. Hexagon converts any of these to fiberglass without excavation, without disrupting decking, landscaping, or outdoor living — and without deferring the WCPUA water chemistry problem to the next surface.

✓ Travis County Hill Country caliche substrate load confirmed and documented — not just noted as a risk
✓ Bee Cave lot tree root intrusion assessed and addressed before application
✓ Pool volume, spa, and tanning ledge fully unified under one fiberglass surface
✓ Full warranty — transferable for Spanish Oaks and Falconhead resale

Highest ROI

Vinyl Liner Pool Conversion

Vinyl liner pools in Bee Cave carry a $4,500–$7,500 replacement cost every 7–10 years, with no improvement to the underlying shell condition. In Spanish Oaks and Falconhead — communities where pool presentation is visible to neighbors and evaluated by HOA committees — a vinyl liner surface is also an aesthetic compromise inconsistent with community standards. Hexagon resurfaces vinyl liner pools by preparing the existing shell and applying a permanent fiberglass interior, delivering a seamless surface worthy of the surrounding property while ending liner replacement costs permanently.

✓ Custom liner fabrication costs eliminated on non-standard Hill Country pool shapes
✓ Fiberglass handles every Bee Cave pool configuration — spa, tanning ledge, water feature inlets
✓ Permanent non-porous surface — HOA-documentable and transferable at Bee Cave market closing
✓ Payback period 10–12 years through eliminated liner costs plus reduced chemical spend

Full System Upgrade

Concrete Block Pool Conversion

Older concrete block pool shells — found on some of Bee Cave's lots with pools built in the 2000s and early 2010s — are particularly vulnerable to mortar degradation and water infiltration in Hill Country caliche environments. Hexagon waterproofs and stabilises the block structure before applying fiberglass, creating a sealed, unified interior surface that stops water migration and restores the pool to full structural integrity.

✓ Block structure assessed and stabilized — root intrusion from mature Bee Cave lot trees documented
✓ Mortar joints sealed against WCPUA hard water infiltration
✓ Water migration behind shell permanently stopped
✓ Preserves mature landscaping and custom hardscape — zero excavation

Premium Upgrade

Fiberglass-to-Fiberglass Conversion

An existing fiberglass pool with a failing original surface — osmotic blistering, deep spider cracks, severe oxidation, or delamination — is a strong fiberglass conversion candidate. Rather than attempting a patch-and-repair cycle on a compromised gel coat, Hexagon removes the failed surface layer, inspects and repairs the structural shell, and applies a fresh HEXConvert™ or Fibre Tech™ system. The result is a pool that performs identically to a new fiberglass installation, with full warranty coverage.

✓ Failed gel coat fully removed — WCPUA scale and substrate pressure evaluated pre-application
✓ Shell structural inspection confirms Hill Country substrate-stressed shell integrity
✓ Full Fibre Tech™ or HEXConvert™ warranty — transferable for Bee Cave estate resale
✓ Preferred over repeated patch repairs on Spanish Oaks and Falconhead aging pools

Why Bee Cave Homeowners Choose Conversion Over Continued Maintenance

The financial case for conversion is straightforward when you compare the cumulative cost of maintaining a traditional surface against the one-time cost of a permanent fiberglass system.

No Excavation. No Disruption.

The entire conversion is performed from inside the pool. No digging, no equipment on your lawn, no damage to decking, irrigation, or landscaping. For properties with Hill Country landscaping, custom hardscape, and HOA exterior restrictions, this is non-negotiable. Hexagon has never required ground disturbance for a conversion project.

The 20-Year Financial Case

A Bee Cave pool on a traditional plaster or vinyl liner cycle costs $38,000–$96,000 over 20 years in surface maintenance alone. A one-time fiberglass conversion costs $14,000–$22,000 and requires no further surface work within the warranty period. The delta — $20,000–$70,000 — is the conversion's return on investment over a 20-year horizon.

HOA-Ready Documentation

Bee Cave's HOA communities — Spanish Oaks, Falconhead, Lake Pointe — require documentation for exterior improvements. Hexagon provides full architectural review packages, City of Bee Cave Development Services permit coordination, and completion documentation at no additional charge. Every conversion leaves the property with a documented, warranty-backed improvement on file.

Your Conversion System: HEXConvert™ or Fibre Tech™

Both systems deliver a permanent fiberglass interior. Your choice determines warranty depth and transferability.

Hexagon-Proprietary

HEXConvert™

✓10-year comprehensive labor & materials warranty
✓Fastest completion — 7-day average
✓Ideal for long-term owners with no near-term sale plans
✓Available in 8 premium color options

Best for: Bee Cave homeowners maximizing long-term value — one HEXConvert™ conversion replaces decades of plaster, liner, and acid wash cycles on a pool built for a Bee Cave Hill Country lot.

Industry Standard

Fibre Tech™

✓25-year transferable material warranty
✓Warranty transfers to next owner — a documented resale asset
✓Preferred for owners with a 5–10 year sale horizon
✓Available in 12 premium color options

Best for: Bee Cave owners listing in the $900K+ market — the 25-year Fibre Tech™ transferable warranty is a documented listing differentiator that Spanish Oaks and Falconhead buyers and appraisers recognize at closing.

Bee Cave Pools Deserve a Permanent Interior

Hexagon assesses your Bee Cave pool's existing structure, recommends the right system for your HOA and Hill Country conditions, and gives you a fixed-price quote. No excavation. No disruption to mature landscaping. Done in 7–10 days.

Get Your Free Conversion Assessment

Full Gel Coat Restoration

Complete color-matched refinish — spa and pool surface unified

Oxidation & Fade Removal

Restores Central Texas Hill Country sun-faded fiberglass to premium original gloss

Spider Crack Filling

Substrate-movement cracks filled and color-matched before gelcoat

Blister & Delamination Fix

Blisters ground out, base repaired, gelcoat applied over top

Existing Fiberglass Pools

Re-Gelcoat Restoration

Already have a fiberglass pool? Bee Cave fiberglass surfaces accumulate WCPUA mineral scale continuously — Lake Travis hard water at 150–200 mg/L deposits calcium on gel coat year-round, and Central Texas UV exposure from March through November drives oxidation into the surface simultaneously. In Spanish Oaks and Falconhead, where HOA architectural standards extend to pool visual condition, a chalky or scale-stained gel coat surface is a compliance matter, not just a maintenance item. Re-gelcoating restores like-new condition without shell replacement.

✓Fraction of the cost of full pool replacement
✓Color-matched or upgrade to a modern premium finish
✓Restores UV protection and chemical resistance
✓Addresses spider cracks and blistering simultaneously
✓Extends pool life by 15–20 years

Get a Re-Gelcoat Assessment

What Is Pool Gel Coat — and Why Do Bee Cave Fiberglass Pools Need Repair?

Gel coat is the outermost layer of a fiberglass pool — a resin-based protective finish that provides the pool's color, gloss, chemical resistance, and UV protection. It is what you see, touch, and swim against. When your fiberglass pool looks faded, feels rough, or shows cracks and blisters, it is the gel coat that has degraded — not the structural fiberglass shell beneath it.

Bee Cave's climate accelerates gel coat degradation faster than national averages. The Central Texas pool season runs March through November — nine months of sustained UV exposure at an index that regularly exceeds 7, combined with August heat indexes above 105°F. WCPUA-supplied water at 150–200 mg/L hardness deposits calcium on gel coat surfaces, dulling gloss and creating surface roughness that traps algae. South-facing pools on Bee Cave's Hill Country lots — common in Spanish Oaks, Falconhead, and Lake Pointe — receive near-constant sun exposure that compounds oxidation year over year. Left unaddressed, degraded gel coat exposes the structural laminate beneath it to chemical penetration, which turns a cosmetic issue into a structural one.

Signs Your Bee Cave Pool Needs Gel Coat Repair

→ Faded, chalky, or dull finish — color no longer vibrant
→ Spider cracks on pool floor, walls, or around fittings
→ Osmotic blisters — raised bubbles on the pool surface
→ Rough or sandpaper texture in previously smooth areas
→ Visible delamination — gel coat separating from shell
→ Persistent staining despite correct water chemistry
→ Patchy color inconsistency across pool and spa surfaces
→ Pool is 10+ years old and has never had a gel coat service

Pool Gel Coat Repair Services in Bee Cave, TX

Hexagon diagnoses the root cause of every gel coat issue before beginning work — Bee Cave's Hill Country caliche substrate, WCPUA hard water, and UV load each produce distinct failure patterns that require different repair approaches. All work is color-matched to your existing finish or upgraded to a premium modern color.

Most Comprehensive

Full Gel Coat Restoration

When oxidation, fading, and minor surface damage are widespread across the pool, a full gel coat restoration is the most cost-effective approach. Hexagon mechanically prepares the entire surface, addresses all underlying defects, and applies a fresh, UV-stabilized gel coat layer across the pool and spa as a unified refinish. The result is a pool that looks, feels, and performs as it did when first installed — with a color-matched or upgraded finish.

✓ Complete pool, spa, and tanning ledge surface unified under new coat
✓ Mechanically prepared — not chemically stripped
✓ UV inhibitors engineered for Bee Cave's south-facing Hill Country lot exposure
✓ Color match or premium upgrade — both meet Spanish Oaks and Falconhead visual standards

Central Texas Most Common

Oxidation & UV Fade Repair

Oxidation is the most common gel coat issue on Bee Cave pools — caused by sustained UV exposure breaking down the resin polymers in the gel coat surface. The finish loses its gloss, turns chalky white or gray, and becomes increasingly porous, holding algae and resisting cleaning. Hexagon's oxidation treatment removes the degraded surface layer, restores chemical resistance and UV protection, and brings the original color back to a like-new standard without full shell replacement.

✓ Chalky, dull finish restored to the gloss Bee Cave Hill Country pools require
✓ Porous oxidized layer removed — not polished over
✓ Algae resistance restored — critical for pools visible from Bee Cave HOA common areas
✓ Effective on all fiberglass pool colors, ages, and Hill Country pool formats

Hill Country Substrate Related

Spider Crack Repair

Spider cracks in fiberglass gel coat are a direct consequence of ground movement — and Bee Cave's Hill Country caliche and limestone substrate, which drains unevenly and shifts with seasonal moisture changes, produces directional stress on pool shells. Spider cracks typically radiate from stress points: fittings, steps, corners, and floor areas above drainage zones. Hexagon repairs spider cracks by grinding out each crack to sound material, filling and laminating the substrate, then applying a color-matched gel coat patch that is invisible under water.

✓ Hill Country caliche substrate movement + drainage patterns confirmed as root cause
✓ Each crack ground to sound substrate — not filled over
✓ Structural laminate repaired beneath the gel coat
✓ Color-matched finish — invisible under water on Bee Cave pool surfaces

Water Chemistry Related

Osmotic Blister Repair

Osmotic blistering occurs when water molecules penetrate a compromised gel coat and accumulate between the gel coat and the fiberglass laminate, forming raised bubbles on the pool surface. In Bee Cave, WCPUA hard water chemistry imbalances — particularly low pH combined with elevated calcium at 150–200 mg/L — accelerate the osmotic process. Hexagon repairs blisters by opening each blister, cleaning the underlying cavity, rebuilding the laminate substrate, and applying gel coat over the repaired area. Water chemistry guidance is provided to prevent recurrence.

✓ Every blister opened, cleaned, and rebuilt — not flattened
✓ Underlying laminate damage addressed before gel coat
✓ WCPUA hard water chemistry guidance specific to Bee Cave's 150–200 mg/L supply
✓ Prevents escalation to full delamination on pools with integrated spas and tanning ledges

Why Bee Cave Homeowners Should Not Delay Gel Coat Repair

Gel coat issues follow a predictable escalation path. What begins as a cosmetic problem — fading, minor cracking — becomes a structural and financial problem if left unaddressed.

Cosmetic → Structural

Spider cracks that remain unfilled allow water to penetrate to the fiberglass laminate. Once water reaches the laminate in a Hill Country caliche environment, hydrostatic pressure cycles cause delamination — separating the gel coat from the shell in sheets. A $400 crack repair becomes a $4,000 delamination job within two to three Central Texas Hill Country seasons.

HOA Visibility

Bee Cave's HOA communities conduct exterior inspections. A visibly faded, cracked, or stained pool surface is grounds for a compliance notice in communities like Spanish Oaks and Falconhead. Addressing gel coat deterioration proactively avoids HOA correspondence, remediation deadlines, and the reputational cost of a non-compliant exterior on a property.

Resale Presentation

In Bee Cave's fast-moving real estate market, pool condition is a material factor in buyer perception and appraisal. A professionally restored gel coat — documented, warranted, and visually premium — positions the pool as an asset rather than a liability in a listing. Buyers in Spanish Oaks, Falconhead, and Lake Pointe expect every detail to be maintained to standard.

What to Expect: The Gel Coat Repair Process

Most Bee Cave gel coat repair projects complete in 3–5 days. Full restorations on pools with integrated spas typically take 5–7 days. No excavation, no heavy equipment, no disruption to your outdoor living space.

Day 1

Assessment & Drain

Hexagon technician inspects the full pool and spa surface under water and dry conditions. Failure type, extent, and root cause confirmed. Pool drained and surface allowed to dry before work begins.

Days 2–3

Surface Preparation

Defects addressed at substrate level — cracks ground and laminated, blisters opened and rebuilt, oxidized surface mechanically abraded. All preparation work is inspected before gel coat is applied.

Days 3–5

Gel Coat Application

Color-matched or upgraded gel coat applied in controlled layers across all repaired and restoration areas. Spa and pool surface unified under the same finish. Edge-to-edge blending ensures no visible repair lines.

Days 5–7

Cure, Polish & Handover

Gel coat cures under Central Texas ambient conditions. Surface buffed to premium gloss. Full inspection completed. Water chemistry guidance provided. Warranty documentation issued at handover.

Restore Your Bee Cave Pool to Premium Condition

Hexagon assesses your fiberglass pool's gel coat, identifies every defect, and provides a fixed-price repair quote. Most jobs complete in 3–5 days — no disruption to your property or HOA standing.

Get Your Free Gel Coat Assessment

Gel Coat Restoration

Color-matched fiberglass refinishing

Structural Repair

Spider crack elimination

Osmotic Blister Repair

Comprehensive surface restoration

Complete Refinishing

Full surface renewal, extended life

3–5 Day Turnaround

Fiberglass Pool Repair

Bee Cave pool repair requires understanding the Hill Country environment: WCPUA's 150–200 mg/L Highland Lakes water infiltrating plaster and gunite fractures, caliche and limestone substrate drainage patterns creating uneven shell stress, and resort-style pool features — infinity ledges, attached spas, vanishing edges — that generic repair contractors are not equipped to address correctly. Hexagon assesses structural cause before any repair material touches the shell.

✓All repairs color-matched to existing finish
✓Structural repairs address clay and root movement root cause
✓Most jobs completed in 3–5 days
✓Up to 5-year warranty on structural repair work

Schedule a Repair Assessment

Why Fiberglass Pool Repair in Bee Cave Requires a Different Approach

Fiberglass pool repairs are not interchangeable with plaster or concrete repairs — and Bee Cave's conditions make the distinction critical. The two dominant forces acting on Bee Cave pools are WCPUA hard water chemistry at 150–200 mg/L from Lake Travis, which infiltrates plaster and gunite fractures continuously, and Hill Country caliche and limestone substrate drainage patterns, which create uneven shell stress over time. A repair that does not account for these forces will fail again within one to two seasons.

Hexagon's repair process begins with a root-cause assessment, not just a visual surface inspection. We identify whether damage originates from substrate movement, water chemistry, root intrusion, or structural fatigue — and address the underlying cause before applying any surface repair. Every repair is color-matched to your existing gel coat and warranted, so the finished result is invisible underwater and backed in writing.

Pool Problems That Need Immediate Attention

! Visible cracks on pool floor, walls, or around fittings
! Water loss exceeding ¼ inch per day (beyond evaporation)
! Skimmer pulling air — cracked housing or broken neck
! Return fittings loose, leaking, or showing separation
! Step or bench delamination pulling away from shell
! Bowing or bulging in pool walls (soil pressure)
! Repeated algae bloom despite correct chemistry
! Equipment pad flooding — possible shell or plumbing leak

Pool Repair Services in Bee Cave, TX

From hairline gel coat cracks to structural shell repairs and full skimmer replacements, Hexagon handles every repair type found on Bee Cave pools — root-cause first, warranty-backed, color-matched to your finish.

Most Requested — Hill Country Substrate

Structural Crack Repair

Structural cracks in fiberglass pools are the direct result of ground movement — and Bee Cave's Hill Country caliche and limestone substrate, which drains unevenly and shifts with seasonal moisture changes, creates directional stress on pool shells. Cracks typically appear on the pool floor above drainage zones, around fittings under directional substrate pressure, and along walls adjacent to mature root systems. Hexagon repairs structural cracks by excavating to the outer shell face where necessary, applying fiberglass laminate to restore structural integrity, and finishing with a color-matched gel coat. The root cause — substrate load, root pressure, or drainage — is documented and addressed as part of the repair scope.

✓ Hill Country caliche substrate movement + mature root load confirmed as root cause
✓ Laminate repair restores structural shell integrity on Bee Cave's Hill Country pool formats
✓ Color-matched gel coat — invisible under water
✓ Up to 5-year warranty on all structural crack repairs

Bee Cave Common

Skimmer Repair & Replacement

Skimmer failure is one of the most common repair calls on Bee Cave pools — and one of the most consequential if ignored. The skimmer housing is bonded to the pool shell at the waterline, a location that experiences the highest concentration of thermal cycling, substrate movement, and UV exposure. Cracks at the skimmer neck or housing allow water to bypass the skimmer seal and migrate behind the shell, where it interacts with caliche substrate to create sustained hydrostatic pressure. Hexagon repairs cracked skimmer housings, replaces failed skimmer bodies, reseals skimmer-to-shell bonds, and installs upgraded skimmer units where the original fitting is beyond repair.

✓ Cracked skimmer neck repaired or housing replaced
✓ Skimmer-to-shell bond resealed — root pressure from mature Hill Country lot trees is a primary driver
✓ Upgraded skimmer units specified for Bee Cave's Hill Country pool volumes
✓ Repair prevents hydrostatic pressure from Travis County caliche seasonal drainage patterns

Water Loss Related

Fitting & Return Line Leak Repair

Return fittings, main drain covers, light housings, and spa jets are all penetration points in the fiberglass shell — and each is a potential leak source as sealants age and substrate movement applies shear force to bonded fittings. Unexplained water loss on a Bee Cave pool is typically traced to one or more fitting penetrations before a shell crack is confirmed. Hexagon performs a systematic pressure test and dye test to locate all active leaks, then repairs or replaces the affected fittings and reseals the shell penetration to current standards.

✓ Systematic pressure and dye test — all penetration points tested, not just the visible ones
✓ Bee Cave resort-style pools with spas and water features have 3–5× more fitting penetrations than standard pools
✓ All shell penetrations resealed to current standards — not re-caulked over failed original sealant
✓ Water loss confirmed resolved before pool is returned to service

Root & Substrate Pressure

Step, Bench & Ledge Repair

Steps, benches, tanning ledges, and spa walls are the structural elements most vulnerable to delamination and cracking on Bee Cave pools. Mature root systems on Hill Country lots exert upward and lateral pressure on horizontal surfaces — steps and ledges — causing separation between the fiberglass laminate layers. Pools with tanning ledges and integrated spas have significantly more horizontal surface area exposed to root pressure than standard pools. Hexagon repairs delaminated steps and ledges by re-bonding the separated layers, applying structural reinforcement where needed, and finishing with a color-matched gel coat.

✓ Tanning ledges and spa walls on Bee Cave Hill Country pools have 2–4× the horizontal surface area of standard steps
✓ Mature cedar and oak root pressure on Hill Country lots documented and addressed — not just repaired over
✓ Structural fiberglass laminate reinforcement applied where root load has compromised the bond
✓ Spa, step, ledge, and tanning ledge surfaces color-unified — invisible repair on resort-finish pools

Repair or Replace? Hexagon's Honest Assessment

Not every repair is worth making — and not every damaged pool needs replacing. Hexagon provides an honest structural assessment of every pool before quoting, with a clear recommendation based on what actually makes financial sense for the property.

When Repair Is the Right Call

Isolated structural cracks with no shell delamination, single skimmer failure, fitting leaks on an otherwise sound shell, and step or ledge repairs on a pool with a good underlying structure are all strong repair candidates. A targeted repair on a sound fiberglass shell typically extends pool life by 10–15 years at a fraction of resurfacing cost.

When Resurfacing Makes More Sense

When a pool has multiple simultaneous failure types — cracks, blistering, oxidation, and fitting leaks together — the cumulative repair cost often approaches resurfacing cost. In those cases, Hexagon recommends resurfacing over piecemeal repair: one fixed price, one process, a new surface, and a full warranty rather than multiple partial warranties on individual repairs.

When the Shell Needs Replacing

Severe shell delamination, hydrostatic uplift (the pool shell has floated), or widespread structural failure from sustained root intrusion are cases where repair is not viable. Hexagon will tell you directly when this is the situation — and provide a full replacement or conversion quote rather than charge for repairs that will not hold.

What to Expect: The Pool Repair Process

Most pool repair projects in Bee Cave complete in 3–5 days. Structural repairs involving excavation or skimmer replacement may extend to 7 days. No heavy equipment on your lawn — all work performed from pool deck level.

Day 1

Diagnosis & Drain

Root-cause assessment of all damage — pressure test, dye test, visual inspection dry and wet. Repair scope confirmed. Pool drained and surface dried before structural work begins.

Days 2–3

Structural Work

Crack repair, skimmer replacement, fitting resealing, or laminate reinforcement completed at shell level. All structural work inspected and approved before gel coat phase begins.

Days 3–4

Gel Coat Finishing

Color-matched gel coat applied over all repair areas. Blended edge-to-edge for an invisible finish. Skimmer surrounds and fitting flanges refinished to match surrounding surface.

Days 4–5

Refill & Warranty

Pool refilled and water chemistry balanced. All repair work documented. Warranty issued — up to 5 years on structural repairs. Final walkthrough confirms every issue resolved.

Bee Cave Pool Repair — Root Cause First, Every Time

Hexagon assesses your Bee Cave pool, identifies every repair need, and gives you an honest recommendation — repair, resurface, or replace. Fixed-price quote, root-cause diagnosis, work that holds through the next Central Texas Hill Country season.

Get Your Free Pool Repair Assessment

Why Bee Cave Pools Benefit from Fiberglass

The Standard Your Investment Deserves

Bee Cave's homes, Hill Country caliche substrate, demanding HOA communities, and Central Texas climate create conditions where fiberglass isn't just better — it's the only responsible choice for a premium pool investment.

Hill Country Substrate

Caliche & Limestone Substrate

Bee Cave sits on Hill Country caliche — thin, limestone-rich soil over Edwards Plateau bedrock that drains unevenly and shifts with seasonal moisture changes. Combined with mature tree root systems, substrate movement creates directional stress on pool shells.

✓Uneven drainage stresses rigid plaster and gunite repeatedly
✓Mature root systems add unpredictable directional pressure
✓Fiberglass flexes with substrate and root movement
✓No cracking — regardless of seasonal substrate shifts

Hard Water

WCPUA Water Chemistry

WCPUA delivers Highland Lakes water at 150–200 mg/L — significantly harder than many Texas markets. This mineral load accelerates plaster etching, scale formation, and chemical imbalance on porous surfaces, particularly on pools approaching 10–15 years of age.

✓Fiberglass is non-porous — WCPUA minerals cannot penetrate
✓Chemical savings are proportionally greater on hard-water pools
✓No calcium etching — surface stays smooth indefinitely
✓Fiberglass eliminates the WCPUA degradation cycle permanently

Central Texas Heat

9-Month Season & Hill Country UV

Bee Cave's March–November pool season means nine months of sustained UV exposure and thermal cycling. Central Texas summers average 98°F in August with heat indexes exceeding 105°F. Pools in constant use face accelerated surface degradation that shortens every plaster and marcite cycle.

✓UV oxidizes and fades plaster and marcite year over year
✓Fiberglass gel coat contains UV inhibitors — resists fading
✓Thermal cycling cracks rigid surfaces over Central Texas winters
✓Fiberglass flexes with temperature extremes — no cracking

HOA Standards

Meeting Bee Cave's Exacting Standards

Bee Cave's HOA communities — Spanish Oaks, Falconhead, Lake Pointe, and others — have architectural committees that review and approve exterior improvements. Fiberglass installations require permits and, in some communities, committee documentation.

✓Full architectural review documentation provided
✓City of Bee Cave Development Services permits coordinated directly by Hexagon
✓Premium color options match Hill Country home exterior finishes
✓Non-disruptive installation — no demolition, no heavy equipment

Result: For Bee Cave pools, fiberglass isn't a premium upgrade — it's the baseline standard that WCPUA hard water, Hill Country substrate, and community expectations demand.

7–10 Day Process

Our Bee Cave Fiberglass Process

From Drain to Swim in Under 2 Weeks

Both HEXConvert™ and Fibre Tech™ follow the same 5-phase installation. No demolition. No disruption to your outdoor living space.

01

Day 1

Assessment & Drain

— Technician confirms system selection
— Pool drain coordinated on-site
— Landscaping and hardscape protection plan agreed
— HEXConvert™ or Fibre Tech™ confirmed

02

Days 2–3

Surface Preparation

— Existing surface cleaned, etched, and profiled
— Substrate drainage and structural cracks resolved
— Equipment access routes protect landscaping throughout

03

Days 4–6

System Application

— Applied in multiple layers by certified technicians
— Hand-crafted to every contour — pool, spa, steps, ledges
— Quality checkpoints throughout

04

Days 7–8

Cure & Inspection

— Cures under controlled conditions
— Central Texas summer heat accelerates the cure phase
— Full quality inspection before refill authorized

05

Days 9–10

Refill & Warranty

— Pool refilled, water chemistry balanced
— HOA documentation and warranty paperwork delivered
— HEXConvert™: 10-yr comprehensive — starts day one
— Fibre Tech™: 25-yr material — transfers with the property

No demolition required · Landscaping protected throughout · HOA documentation provided at completion

Schedule Your Assessment

Why Hexagon

Why Bee Cave Chooses Hexagon

Fiberglass specialists — meeting Bee Cave's standard

01

Bee Cave Permitting Expertise

✓ Experienced with Spanish Oaks, Falconhead & Lake Pointe HOA requirements
✓ Full architectural review documentation provided
✓ City of Bee Cave Development Services permit coordination included

02

Full-Scale Capability

✓ Equipped for pools 600 sq ft and above
✓ Spa, water feature, and tanning ledge expertise
✓ Landscaping and hardscape protection protocol

03

Industry Recognition

✓ Texas Pool & Spa Association certified
✓ Certified Pool Operators on every project
✓ $2M liability insurance

04

Exclusive Technology

✓ HEXConvert™ proprietary to Hexagon
✓ Exclusive Fibre Tech™ materials
✓ Methods developed over 3 decades
✓ Factory direct quality assurance

Our Bee Cave Service Area

Serving all of Bee Cave and surrounding Lake Travis corridor communities within a 30-mile radius

972-789-2983

Click to call

Bee Cave Communities We Serve

Trusted by homeowners in Bee Cave's most exclusive neighborhoods

Gated / Ultra-Premium

Spanish Oaks & The Reserve

Spanish Oaks Spanish Oaks East The Reserve at Spanish Oaks Falcons Lair

Specialty Ultra-premium gated community experience with full architectural committee documentation

Challenge Among the strictest HOA architectural standards in Central Texas — documentation must be exact

Master-Planned / Golf

Falconhead & The Fairways

Falconhead Falconhead West Falconhead Ranch The Fairways

Specialty Golf course community expertise with premium finish coordination and HOA permit handling

Challenge WCPUA mineral deposits on 2000s-era pools reaching first or second replaster cycle now

Established

Lake Pointe & Bee Cave Woods

Lake Pointe Lakeland Hills Hudson Bend Bee Cave Woods

Specialty Established neighborhood expertise with 2000s-era plaster and aggregate configurations

Challenge Hill Country caliche drainage challenges and WCPUA water damage on 15–20 year old pools

New Development

Provence & Bella Colinas

Provence Bella Colinas Ladera Vineyards at Bee Cave

Specialty Proactive conversion expertise for newer pools approaching first replaster milestone

Challenge Convert before the replaster cycle begins — newer shells are ideal conversion candidates

Full Coverage

Every Bee Cave address covered

Every Bee Cave neighborhood — Spanish Oaks, Falconhead, Lake Pointe, Provence, and all communities in between — receives the same quality standards, materials, and warranty coverage. HOA documentation packages are provided for every job without additional charge.

Confirm Your Coverage

Bee Cave Success Stories

Real Results from Your Neighbors

Spanish Oaks

"Spanish Oaks architectural committee — approved on first submission"

"Spanish Oaks has one of the most thorough architectural review processes in the Austin metro. Material specs, color samples, warranty documentation — the committee reviews all of it. Hexagon assembled the complete submission package and managed the entire process. Approved on the first submission without a single revision request. The sapphire finish they recommended looks extraordinary against the Hill Country stone on the house."

— David & Michelle Forsythe, Spanish Oaks

Pool with attached spa · Fibre Tech™ 25-yr warranty · Investment: $26,200

Falconhead

"WCPUA water damage — finally addressed permanently"

"Our Falconhead pool was resurfaced in 2011 and again in 2018. Both times the same story — rough texture, calcium haze, chemical bills we could not control. Our contractor blamed the water. What he did not offer was a permanent fix. Hexagon converted the pool to fiberglass and explained exactly why WCPUA's mineral chemistry would never let plaster last. Two Austin summers in and the surface looks exactly as it did on day one."

— Robert & Jennifer Whitmore, Falconhead

Pool Age: 14 years · HEXConvert™ 10-yr warranty · Investment: $22,800

Lake Pointe

"First replaster avoided — converted at exactly the right time"

"Our pool was 13 years old and the plaster was getting rough from the WCPUA water. Our neighbor had just finished his third replaster and said the new surface was already showing calcium etching. I called Hexagon instead. They assessed our shell — still structurally sound — and explained that converting now versus starting another replaster cycle was the financially correct decision. The process took eight days. We have not thought about the pool surface since."

— Steven & Karen Marshall, Lake Pointe

Pool Age: 13 years · Fibre Tech™ 25-yr warranty · Investment: $21,500

Provence

"Listed with a 25-year warranty — sold in under a week"

"We converted before listing because our real estate agent told us directly — Bee Cave buyers inspect pools carefully and a plaster pool with calcium haze will cost you at negotiation. The Fibre Tech™ 25-year transferable warranty went on the listing sheet. Our attorney confirmed it transfers at closing. We had an offer in five days. The buyer's inspector flagged zero pool issues. The warranty was specifically mentioned by the buyer's agent as a deciding factor."

— Christopher & Amanda Delgado, Provence

Fibre Tech™ warranty transferred at closing · Investment: $23,900

20-Year Cost Comparison

Investment & Savings Analysis

Bee Cave pool ownership costs over 20 years

Traditional Path

Resurfacing Cycle · 20 Years

Item	Annual	20-Year
Replastering (every 8 yrs, WCPUA water)	$1,900	$38,000
Chemical premium (hard WCPUA water)	$1,100	$22,000
Acid washing & mineral descaling	$650	$13,000
Hill Country substrate drainage maintenance	$700	$14,000
Water replacement & refills	$450	$9,000
Total Traditional Path	—	$96,000

Hexagon Fiberglass Path

One Conversion · 20 Years

Item	One-Time / Annual	20-Year
Initial conversion	$20,500	$20,500
Maintenance (reduced)	$300/yr	$6,000
Chemicals (up to 45% less)	$605/yr	$12,100
Repairs (within warranty)*	$0	$0
Total Hexagon Path	—	$38,600

* HEXConvert™ covers labor & materials for years 1–10. Fibre Tech™ material warranty covers years 1–25. Post-warranty repair costs will vary.

Potential Bee Cave Savings

$57,500

based on a typical $20,500 conversion · Transferable warranty protects your Bee Cave real estate investment

Results will vary based on pool size, usage, and local market conditions. Property value estimates are illustrative only. Consult a licensed real estate professional for advice specific to your property.

60–80%

Returns at resale

18–25%

Fewer days on market

$20k–$50k

Higher sale price

Transferable

Warranty included

Calculate Your Pool Savings

FAQs

Bee Cave Pool Questions

Almost certainly yes. Most pools in Bee Cave were built during the community's growth surge from the early 2000s through the 2010s, which means a large number of them are right now at or past the standard 15–20-year plaster lifespan. WCPUA's Highland Lakes source water at 150–200 mg/L has been etching those surfaces since day one, and what looks like minor roughness or staining is typically the beginning of structural plaster failure. Catching this at the first milestone — rather than after the second replaster — is exactly when a conversion pencils out best financially.

West Travis County PUD draws from the Highland Lakes system and delivers water to Bee Cave at 150–200 mg/L total hardness. Because Bee Cave pools are newer, many homeowners haven't yet seen what this water does to a plaster surface over time. Calcium-rich WCPUA water etches marcite and plaster at a molecular level, creating a rough, porous surface that traps algae and demands constant chemical intervention. Fiberglass is chemically inert, so WCPUA water has no mechanism to attack it.

Spanish Oaks has one of the stricter HOA architectural review processes in Hays County, and yes, any exterior modification including a pool resurfacing or conversion is subject to ARC approval. We provide homeowners in Spanish Oaks with a complete submittal package: material specifications, color samples, before/after documentation, and a project scope letter written to ARC standards. Most Spanish Oaks ARC reviews resolve within 14–21 days and we build that window into the project schedule at no additional charge.

Falconhead and Spanish Oaks both require architectural approval, but Falconhead's ARC tends to focus more on exterior color consistency with community aesthetics — particularly for pools visible from golf course common areas. We carry Falconhead's approved color matrix and can walk you through compliant fiberglass color selections during your consultation. Approval timelines in Falconhead typically run 10–21 days; we coordinate directly with the management office so you don't have to navigate that process alone.

Edwards Plateau limestone under Bee Cave is better for pool structural integrity than Blackland Prairie clay, but it introduces a different challenge: limestone and caliche are essentially non-compressible, so pools settle very differently than clay-soil pools. The substrate doesn't heave seasonally the way clay does, but any voids or fracture planes in the caliche layer can create localized settlement. Fiberglass conversions on Bee Cave's limestone substrate are extremely stable once installed, with none of the seasonal cracking that plagues pools in clay-heavy markets to the north and east.

A Bee Cave homeowner who converts to fiberglass at the first replaster milestone rather than paying $7,000–$12,000 for replaster and then repeating that cycle will save approximately $57,500 over 20 years. That accounts for eliminated replaster cycles, lower chemical costs due to fiberglass's non-porous surface, and reduced equipment wear from water chemistry swings. That figure is specific to WCPUA water chemistry conditions and Bee Cave's pool size distribution. Call 972-789-2983 for a free consultation and a written savings projection tied to your specific pool.

Yes — City of Bee Cave permit coordination is included on every project at no additional charge. Bee Cave operates its own permitting office through City Hall on Bee Caves Road, separate from Travis County, and pool surface work requires a permit and inspection. We file all documentation, schedule inspections, and deliver the completed permit package to you at project closeout. Homeowners in Lake Pointe and Provence who are also subject to HOA review get coordinated scheduling so the permit and ARC timelines run concurrently rather than sequentially.

UV degradation is a legitimate concern in the Hill Country, where Bee Cave pools are exposed to intense summer sun with minimal tree canopy compared to wooded Austin neighborhoods. Standard plaster and marcite surfaces oxidize, chalk, and stain under sustained UV exposure. Our Fibre Tech™ fiberglass system uses a UV-stabilized gel coat engineered specifically for outdoor pool environments, and the color is integral to the surface rather than applied on top, so there is no surface layer to oxidize or peel. The 25-year structural warranty covers the surface regardless of sun exposure conditions.

A fiberglass conversion requires draining the pool but involves no excavation, no heavy equipment on your decking, and no disruption to surrounding hardscape or landscaping. In Hill Country communities like Provence where properties often feature native stone, decomposed granite, and established xeriscape plantings, this matters — there is no equipment access trench, no spoil pile, and no reconstruction of deck areas. The 7–10 day process is self-contained to the pool shell itself.

In Bee Cave's high-income Hays County market, a documented fiberglass conversion with a transferable 25-year structural warranty is a quantifiable asset at closing. Buyers doing due diligence on a $800,000–$1.5M+ Bee Cave home ask about pool condition; a warranty that transfers with the property eliminates the pool from the buyer's deferred-maintenance mental ledger entirely. Our Fibre Tech™ and HEXConvert™ warranties both transfer to new owners by name at no charge — we provide updated warranty documentation at closing upon request.

LIMITED TIME
Bee Cave Fiberglass Special

Save $1,500 on Your Pool Conversion

Book your Bee Cave fiberglass assessment before June 1, 2026:

$1,500 OFF any conversion over $15,000

Complimentary pool assessment ($500 value)

0% Financing for 18 months (qualified buyers)

HOA Documentation package included at no charge

Exclusive to Bee Cave fiberglass projects. Limited appointments available.

Start Your Pool Transformation — 972-789-2983

Bee Cave Fiberglass PoolRepair & Resurfacing7-10 Day Install

10 or 25 Yr

7-10 Days

HOA Ready

Get Your Complimentary Bee Cave Quote

Bee Cave Pool Services

Fiberglass Pool Resurfacing

Fiberglass Pool Conversion

Re-Gelcoat Restoration

Fiberglass Pool Repair

Why Bee Cave Pools Benefit from Fiberglass

Caliche & Limestone Substrate

WCPUA Water Chemistry

9-Month Season & Hill Country UV

Meeting Bee Cave's Exacting Standards

Our Bee Cave Fiberglass Process

Assessment & Drain

Surface Preparation

System Application

Cure & Inspection

Refill & Warranty

Why Bee Cave Chooses Hexagon

Bee Cave Permitting Expertise

Full-Scale Capability

Industry Recognition

Exclusive Technology

Our Bee Cave Service Area

Bee Cave Communities We Serve

Spanish Oaks & The Reserve

Falconhead & The Fairways

Lake Pointe & Bee Cave Woods

Provence & Bella Colinas

Every Bee Cave address covered

Bee Cave Success Stories

Investment & Savings Analysis

Bee Cave Pool Questions

1 My Bee Cave home was built in the early 2000s — is my pool actually due for resurfacing already?

2 How does WCPUA water from the Highland Lakes affect my Bee Cave pool?

3 I live in Spanish Oaks — does fiberglass pool resurfacing require HOA approval, and does Hexagon handle that process?

4 Does Falconhead's golf course HOA have different requirements than Spanish Oaks for pool work?

5 Bee Cave is Hill Country limestone — is that actually better or worse for my pool than the clay soil I've heard about in other cities?

6 What are the projected savings for a Bee Cave homeowner who converts now instead of replastering again?

7 Does Hexagon coordinate permits with the City of Bee Cave for pool resurfacing projects?

8 How does fiberglass hold up against the intense Hill Country UV exposure in Bee Cave?

9 My Bee Cave pool is in a Provence community home — will the resurfacing process damage my landscaping or hardscape?

10 I'm planning to sell my Bee Cave home in the next few years — does a fiberglass conversion add value at closing?

Save $1,500 on Your Pool Conversion

Your Home Deserves a Pool Surface That Matches It

Bee Cave Fiberglass Pool
Repair & Resurfacing
7-10 Day Install