Cedar Park Fiberglass Pool Repair & Resurfacing 7-10 Day Install

Eastern Cedar Park communities like Carriage Hills sit on Williamson County soils with measurable clay content — transitioning away from the pure limestone of the western neighborhoods. That clay influence means your pool may have experienced some of the seasonal cracking and surface movement more typical of North Texas clay markets, stacked on top of the BCRUA water chemistry hardness. We assess both the soil conditions and the shell during the free consultation; pools on clay-influenced substrate in eastern Cedar Park sometimes show a different failure pattern than western Cedar Park pools and may require different prep work before conversion.

The Brushy Creek Regional Utility Authority supplies Cedar Park from Lake Georgetown and Stillhouse Hollow Lake at 130–170 mg/L total hardness. That hardness range is firmly in the range that accelerates plaster degradation — calcium scaling, surface etching, and increased algae adhesion on rough plaster surfaces. BCRUA water has been delivering mineral load to Cedar Park pools since the city's major growth phase in the 2000s, which means a large number of pools are right now at the first-replaster milestone with surfaces already compromised by 15–20 years of BCRUA chemistry.

Yes, and this is one of the defining market dynamics in Cedar Park right now. The city's boom-era construction produced a dense cohort of pools built within roughly a 10–15 year window, which means a disproportionately large share of Cedar Park pools — in Twin Creeks, Forest Oaks, Cypress Canyon, Bella Vista, and surrounding neighborhoods — are simultaneously reaching or past the first-replaster milestone. Scheduling with reputable contractors fills up faster during these cohort windows. Homeowners who call 972-789-2983 now for a free consultation can lock in scheduling priority before the peak demand period.

The 7–10 day conversion process is self-contained and does not require you to be home throughout. Days 1–2 handle drain and surface preparation; days 3–6 cover fiberglass application and cure; days 7–8 address coping, tile, and equipment reinstallation; days 9–10 complete refill, water chemistry balancing, and completion documentation delivery. We provide daily status updates by text or email and can coordinate final walkthrough scheduling around your calendar. Many Cedar Park tech-sector clients complete their entire project remotely except for the initial consultation and final sign-off.

Twin Creeks HOA requires architectural review for exterior modifications, and pool resurfacing that changes the surface material or color is subject to that process. We prepare a complete ARC submittal package for Twin Creeks homeowners: material specifications, color samples from the approved palette, project timeline, and contractor documentation. Twin Creeks ARC reviews typically resolve within 14–21 days; we build that window into the project schedule and submit as early as possible so approval is in hand before mobilization.

Cedar Park homeowners on BCRUA water save approximately $56,100 over 20 years by converting to fiberglass rather than continuing on the replaster cycle. That figure accounts for BCRUA's 130–170 mg/L hardness, the eliminated replaster costs ($7,000–$12,000 per cycle), reduced chemical consumption on fiberglass's non-porous surface, and avoided acid washing and structural repair costs. For a written savings projection tied to your specific pool, BCRUA service address, and pool age, call 972-789-2983 for a free consultation.

Fiberglass is well-suited for both pool and spa surfaces and is in fact more durable in spa environments than plaster, because spas operate at higher temperatures and higher chemical concentrations that accelerate plaster erosion. BCRUA water at 130–170 mg/L is especially aggressive in heated spa conditions where evaporation concentrates the dissolved minerals. We convert pool-and-spa combinations within the same 7–10 day project window, with a single warranty document covering both surfaces.

The substrate difference affects installation preparation and potential pre-work, but the fiberglass surface warranty — 25 years structural through Fibre Tech™ — is the same regardless of substrate, because the warranty covers the shell surface itself rather than the surrounding soil. Where clay-influenced substrate in eastern Cedar Park communities like Carriage Hills indicates elevated hydrostatic or movement risk, we address those conditions during prep before the fiberglass is applied, so the installed surface performs to the same standard as a limestone-substrate pool in Buttercup Creek or Cypress Canyon.

HEXConvert™ Resurfacing is our proprietary fiberglass resurfacing system. We bond a multi-layer fiberglass-and-gelcoat surface over your existing concrete, gunite, or plaster shell to create one continuous, non-porous, factory-smooth finish. Unlike plaster — which has to be redone every 7–10 years — a HEXConvert™ surface is a one-time installation backed by a 10- or 25-year warranty.

Re-Gel is the gelcoat-renewal stage of the HEXConvert™ system. We apply a fresh, color-matched gelcoat over the fiberglass to restore the smooth, glossy finish and protect it against UV, pool chemicals, and everyday wear — bringing an existing fiberglass surface back to like-new condition without a full rebuild.

Fiberglass lasts 25+ years vs 7-10 for plaster, reduces chemical usage by 75%, prevents algae growth, and never needs acid washing.

Our 25-year warranty covers the fiberglass shell against structural defects, delamination, blistering, and fading. It's transferable to future homeowners.

Both deliver the same smooth, permanent fiberglass surface — the difference is the warranty. HEXConvert™ is our proprietary system with a 10-year comprehensive (labor and materials) warranty and the fastest install. Fibre Tech™ carries a 25-year transferable material warranty, ideal if you may sell since it follows the home. We'll help you choose at the consultation.

Yes! Pool conversion works excellently for old or damaged pools. In fact, conversion is often the best solution for aging pools with cracks, surface deterioration, or structural issues. Our Fibre Tech™ system bonds directly to your existing concrete/gunite structure and can bridge minor cracks while providing structural reinforcement. We've successfully converted pools that are 30+ years old. During your free consultation, we'll assess your pool's condition and recommend the best approach for your specific situation.

Yes! Our Fibre Tech™ technology is custom-molded to fit any pool shape and size, from standard rectangles to custom freeform designs.

Your pool will look better! You can choose from various colors and the smooth gel-coat surface is more attractive than weathered plaster.

Absolutely! Fiberglass is completely salt-resistant, unlike concrete which can deteriorate from salt exposure.

Usually no. Most existing equipment works perfectly with fiberglass. We'll assess during consultation and recommend upgrades only if beneficial.