Frisco Fiberglass Pool Repair & Resurfacing 7-10 Day Install

Yes! We serve all Frisco neighborhoods including Stonebriar, Phillips Creek Ranch, Starwood, and more. Call us at (972) 789-2983 to confirm service in your area.

Costs vary by pool size and condition. Most Frisco homeowners save $20,000-$40,000 over 25 years by eliminating repeated resurfacing cycles.

Call us at (972) 789-2983 for a free consultation. We'll assess your pool, discuss options, and provide a detailed quote with no obligation.

A professionally installed fiberglass surface lasts for decades — far longer than the 5–7 years plaster gives you in Collin County. HEXConvert™ carries a 10-year comprehensive warranty and Fibre Tech™ a 25-year transferable material warranty, and both routinely outlast those terms with normal care. You end the replaster cycle instead of repeating it.

Yes. We repair gel-coat fading and oxidation, spider cracks, osmotic blisters, and structural cracks on fiberglass pools — color-matched so the repair is invisible under water. Most repairs finish in 3–5 days, and we diagnose the root cause (usually Blackland-clay movement) so the fix lasts.

It depends on the damage: minor gel-coat touch-ups start around $800–$1,500, larger restorations run $3,000–$8,000, and complete refinishing $8,000–$15,000. You get a firm, itemized quote at the free assessment — and catching damage early in Frisco's clay soil is always cheaper than waiting.

Frisco's North Texas Municipal Water District supply is hard and mineral-heavy, scaling and staining porous plaster. Both HEXConvert™ and Fibre Tech™ fiberglass surfaces are non-porous, so minerals can't penetrate — no scale buildup, far less staining, and no acid-washing cycle. We balance your startup chemistry for local conditions.

Yes — it's fiberglass's biggest advantage here. Frisco sits on Blackland Prairie's expansive Houston Black clay, which swells and shrinks seasonally and cracks rigid plaster and gunite. Fiberglass flexes with that movement instead of fracturing, and we resolve drainage and any structural cracks during prep so the result is permanent.

Yes. From Stonebriar and Phillips Creek Ranch to Starwood and Newman Village, we provide the documentation HOAs request, and our finishes meet or exceed neighborhood standards. Most HOAs approve our fiberglass work readily once they've seen the results nearby.

Yes, through all four seasons — we schedule around rain and continue prep during delays, and cooler months often book faster. Winter freeze damage is a common North Texas repair call, and fiberglass flexes through freeze-thaw far better than rigid plaster.

It can. A smooth, modern, warrantied surface shows well to buyers, and the Fibre Tech™ 25-year warranty is transferable — a documented asset that follows the home. In Frisco's active market, a low-maintenance pool with warranty paperwork is a genuine selling point versus a pool due for another replaster.

Yes. We convert and refinish pools with attached spas, tanning ledges, benches, and water features, unifying the whole surface in one finish. These are included in the structural assessment so your quote covers the entire pool, not just the main shell.

HEXConvert™ Resurfacing is our proprietary fiberglass resurfacing system. We bond a multi-layer fiberglass-and-gelcoat surface over your existing concrete, gunite, or plaster shell to create one continuous, non-porous, factory-smooth finish. Unlike plaster — which has to be redone every 7–10 years — a HEXConvert™ surface is a one-time installation backed by a 10- or 25-year warranty.

Re-Gel is the gelcoat-renewal stage of the HEXConvert™ system. We apply a fresh, color-matched gelcoat over the fiberglass to restore the smooth, glossy finish and protect it against UV, pool chemicals, and everyday wear — bringing an existing fiberglass surface back to like-new condition without a full rebuild.

Fiberglass lasts 25+ years vs 7-10 for plaster, reduces chemical usage by 75%, prevents algae growth, and never needs acid washing.

Our 25-year warranty covers the fiberglass shell against structural defects, delamination, blistering, and fading. It's transferable to future homeowners.

Both deliver the same smooth, permanent fiberglass surface — the difference is the warranty. HEXConvert™ is our proprietary system with a 10-year comprehensive (labor and materials) warranty and the fastest install. Fibre Tech™ carries a 25-year transferable material warranty, ideal if you may sell since it follows the home. We'll help you choose at the consultation.

Yes! Pool conversion works excellently for old or damaged pools. In fact, conversion is often the best solution for aging pools with cracks, surface deterioration, or structural issues. Our Fibre Tech™ system bonds directly to your existing concrete/gunite structure and can bridge minor cracks while providing structural reinforcement. We've successfully converted pools that are 30+ years old. During your free consultation, we'll assess your pool's condition and recommend the best approach for your specific situation.

Yes! Our Fibre Tech™ technology is custom-molded to fit any pool shape and size, from standard rectangles to custom freeform designs.

Your pool will look better! You can choose from various colors and the smooth gel-coat surface is more attractive than weathered plaster.

Absolutely! Fiberglass is completely salt-resistant, unlike concrete which can deteriorate from salt exposure.

Usually no. Most existing equipment works perfectly with fiberglass. We'll assess during consultation and recommend upgrades only if beneficial.