Fiberglass Pool Repair & Resurfacing Hurst TX

Hurst Pool Services

Complete fiberglass solutions for every pool type

Fiberglass Pool Resurfacing

Replace deteriorating plaster or marcite on your Hurst pool with permanent fiberglass — eliminating the surface failures that mixed Cross Timbers soil and North Texas heat cause on traditional materials.

Fiberglass is the lasting way to restore your pool's surface after years of plaster wear and staining.

Permanent surface vs. recurring $6,000–$12,000 replastering
Glass-smooth — never rough, stained, or scaled again
Up to 45% reduction in chemical usage
Algae-resistant non-porous surface
Choice of 10-yr or 25-yr transferable warranty

7-10 Day Install 10 or 25-Yr Warranty HOA Documentation Included

Learn About Hurst Resurfacing

Fiberglass Pool Resurfacing in Hurst — before and after

What Is Pool Resurfacing — and Why Does Your Hurst Pool Need It?

Pool resurfacing removes or overcoats your pool's existing interior finish and applies a new, durable surface layer to the shell. In Hurst, that surface degrades faster than the national average for three local reasons: the Eastern Cross Timbers' sandy loam over expansive clay — meeting Grand Prairie limestone — shifts the shell unevenly and cracks rigid finishes, hard North Texas water deposits scale on porous plaster, and a long, hot pool season with 100°F-plus summers drives sustained UV and chemical wear.

Left unaddressed, a failing surface gets progressively more expensive — rough plaster holds mineral deposits and demands more aggressive acid washing, while cracks let water migrate behind the shell where Hurst's expansive-clay zones compound the damage. Resurfacing before the surface reaches failure is always cheaper than remediation after it.

Signs Your Hurst Pool Needs Resurfacing

Rough or sandpaper texture on floor and walls
Persistent staining acid washing no longer removes
Visible cracks, chips, or delaminating patches
Chalky calcium deposits or efflorescence
Recurring algae despite correct chemistry
Fading, discoloration, or uneven finish color
Unexplained water loss (surface micro-leaks)
Surface age over 7 years on plaster or marcite

Pool Resurfacing Services in Hurst, TX

Hexagon resurfaces every pool type found in Hurst — from aging plaster gunite pools in the established Mid-Cities neighborhoods to vinyl-liner pools near the Euless and Bedford borders. Every path ends the same way: a permanent fiberglass surface engineered for Hurst's mixed soil conditions.

Most Common

Plaster & Marcite Resurfacing

The majority of Hurst pools built before the 2010s have white plaster or marcite interiors that hard North Texas water scales and mixed Cross Timbers soil movement cracks. Hexagon removes the deteriorated layer, repairs soil-driven structural cracks in the gunite shell, and applies HEXConvert™ or Fibre Tech™ fiberglass directly to the prepared surface — ending the replaster cycle permanently.

Replastering eliminated — not deferred
Structural crack repair included in prep
Fiberglass bonds directly to gunite shell
Glass-smooth finish, never rough again

Growing Demand

Pebble & Aggregate Resurfacing

Pebble and aggregate finishes installed across Hurst's Mid-Cities neighborhoods roughen under hard water within a decade, becoming abrasive and hard to balance. Fiberglass resurfacing over aggregate delivers a glass-smooth, chemically neutral surface without shell demolition.

Hard-water mineral embed in aggregate ended permanently
Applied over existing aggregate — no demolition
Chemical neutrality reduces balancing burden
Glass-smooth, algae-resistant replacement

Mid-Cities Suburban

Vinyl Liner Pool Resurfacing

Vinyl liner pools in Hurst's established neighborhoods carry a recurring liner-replacement cost every 7–10 years, and mixed soil movement accelerates seam failure. Hexagon resurfaces vinyl liner pools with a permanent fiberglass interior — eliminating liner replacement and the soil-driven shell movement at once.

Liner replacement cycle eliminated permanently
Soil-driven shell movement addressed
Permanent non-porous surface over prepared shell
Handles any Hurst pool shape

Existing Fiberglass

Fiberglass Re-Resurfacing

Older fiberglass pools show oxidation, gel-coat fading, and spider cracking under North Texas UV and hard water. Hexagon re-resurfaces aging shells by grinding, repairing, and applying a fresh HEXConvert™ or Fibre Tech™ system — restoring like-new performance with full warranty from day one.

Restores shells degraded by North Texas UV and hard water
Blisters and soil-driven spider cracks repaired first
Full transferable warranty from day one
15–20 year life extension

Why Fiberglass Resurfacing — Not Replaster, Pebble Tec, or Epoxy Paint

Hurst homeowners are typically presented with four resurfacing options. Here is an honest comparison of how each performs against mixed Cross Timbers and Grand Prairie soils, hard North Texas water, and triple-digit-to-freeze cycling over a 20-year ownership horizon.

Surface Type	Lifespan	20-Yr Cost	Hard Water	Mixed Soil
White Plaster	5–7 yrs	$54k–$96k	Scales within months	Cracks with soil shift
Marcite	6–8 yrs	$48k–$80k	Stains & scales rapidly	Cracks with movement
Pebble / Aggregate	8–12 yrs	$40k–$64k	Roughens in hard water	Cracks with movement
Epoxy Paint	2–4 yrs	$60k–$90k+	Peels in North Texas heat & UV	Delamination risk
✓ HEXConvert™ / Fibre Tech™ Fiberglass	20–30 yrs	$12k–$19k	Non-porous — no scale	Flexes — no cracking

* 20-year cost estimates are illustrative, based on typical Hurst pool sizes (600–900 sq ft). Includes material, labor, and chemistry costs per cycle.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Hurst owners on a long-term hold — fastest installation, comprehensive warranty, no future surface decisions.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Hurst owners with a 5–10 year resale horizon — the 25-year transferable warranty documents a premium pool upgrade for any Mid-Cities listing.

Ready to End the Replastering Cycle in Hurst?

Hexagon assesses your Hurst pool, confirms the right system, and gives you a fixed-price quote — no surprises, no upsells, no replaster in 5 years.

Get Your Free Hurst Resurfacing Assessment

Save $20k–$40k lifetime

Fiberglass Pool Conversion

Vinyl liner, gunite, concrete, or aging fiberglass — Hexagon converts all pool types to superior fiberglass without excavation, keeping your existing Hurst pool structure.

Vinyl liner → fiberglass — eliminates recurring liner replacement
Gunite → fiberglass — stops soil-driven structural cracking
Concrete → fiberglass — ends perpetual maintenance cycles
No excavation — decking and landscaping untouched

HEXConvert™ 10-yr Fibre Tech™ 25-yr No Excavation

Explore Hurst Conversion

Fiberglass Pool Conversion in Hurst — before and after

What Is a Fiberglass Pool Conversion — and Is It Right for Your Hurst Pool?

A conversion is a complete interior system change — transforming your pool from its current surface (vinyl liner, plaster, gunite, concrete) to a permanent, non-porous fiberglass shell. Unlike resurfacing, conversion is the right call when the underlying system has reached the end of its service: a vinyl pool on its second-plus liner, a gunite shell that cracks again after every soil-driven repair, or a maintenance bill that now rivals the one-time cost of a permanent fix.

Hexagon performs every Hurst conversion without excavation — no disruption to decking, landscaping, or outdoor living space. The entire conversion is completed from inside the pool in 7–10 days.

You're a Conversion Candidate If…

Your vinyl liner has been replaced once or more
Your gunite or concrete pool cracks recur after repair
Annual maintenance exceeds $3,000 with no improvement
Your pool has multiple simultaneous failure types
You're preparing the property for sale
Your pool is 15+ years old with no system upgrade

Fiberglass Pool Conversion by Pool Type

Hexagon converts every pool type found in Hurst. The method is tailored to the existing shell — but the outcome is always the same: a permanent, low-maintenance fiberglass interior with full warranty coverage.

Most Requested

Gunite & Shotcrete Conversion

Gunite is the most common pool type in Hurst's established Mid-Cities neighborhoods. Mixed Cross Timbers soil over expansive-clay zones causes the shell to develop structural cracks that return after every repair as the ground shifts seasonally. Conversion ends the cycle with a flexible, non-porous fiberglass surface that accommodates the soil movement that makes rigid concrete crack.

Structural crack cycle ends permanently
Flexible fiberglass accommodates soil movement
Applied directly to prepared gunite shell
Pool and spa unified under one surface

Highest ROI

Vinyl Liner Conversion

Vinyl liner pools carry a recurring replacement cost every 7–10 years, and North Texas conditions push degradation to the shorter end. A conversion eliminates the cycle entirely — Hexagon prepares the existing shell, repairs underlying damage, and installs a permanent fiberglass interior.

Recurring liner-replacement cost eliminated
Underlying shell damage repaired first
No more wrinkling, fading, or tearing
Non-porous surface for the life of the pool

Full Upgrade

Concrete & Older Shells

Older concrete and block shells in Hurst's mature neighborhoods are vulnerable to mortar degradation and water infiltration in expansive-clay zones. Hexagon waterproofs and stabilizes the structure before applying fiberglass, creating a sealed, unified interior without full demolition.

Structure assessed and stabilized first
Water migration behind the shell stopped
Sealed, unified fiberglass interior
Viable alternative to demolition and rebuild

Premium Upgrade

Fiberglass-to-Fiberglass

An existing fiberglass pool with a failing original surface — blistering, spider cracks, oxidation — is a strong conversion candidate. Rather than patch a compromised shell, Hexagon removes the failed layer, inspects and repairs the structure, and applies a fresh system with full new warranty.

Failed gel coat fully removed
Structural shell inspection and repair
Full warranty — transfers at sale
Preferred over repeated patch repairs

Why Hurst Homeowners Choose Conversion Over Continued Maintenance

The financial and practical case for conversion is clear when you compare the cumulative cost of maintaining a traditional surface against the one-time cost of a permanent fiberglass system.

No Excavation. No Disruption.

The entire conversion is performed from inside the pool. No digging, no equipment on your lawn, no damage to decking, irrigation, mature trees, or outdoor kitchen structures. Hurst properties with custom outdoor living spaces, pergolas, and fencing present no complications — Hexagon never requires ground disturbance for a conversion project.

The 20-Year Financial Case

A Hurst pool on a traditional plaster or vinyl liner cycle costs tens of thousands of dollars over 20 years in surface maintenance alone — accelerated by hard North Texas water, mixed soil movement, and the long North Texas pool season. A one-time fiberglass conversion costs $8,000–$20,000 and requires no further surface work within the warranty period. The difference is the conversion's return on investment.

A Documented Mid-Cities Resale Asset

In the active HEB-area real estate market, a Fibre Tech™ 25-year transferable warranty is a documented asset that survives a sale and follows the property. For Hurst homeowners with a resale horizon, a warranted fiberglass conversion is one of the higher-ROI pool improvements available — turning a maintenance liability into a selling point.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Hurst homeowners maximizing long-term value and minimizing time out of the pool.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Hurst owners planning to sell — the transferable 25-year warranty is a documented asset in the active Mid-Cities market.

Stop Maintaining. Start Converting.

Hexagon assesses your Hurst pool's structure, recommends the right conversion system, and gives you a fixed-price quote. No excavation. Done in 7–10 days.

Get Your Free Conversion Assessment

Existing Fiberglass Pools

Pool Gelcoat Repair

Already have a fiberglass pool? Gel coat fades, oxidizes, and develops spider cracks — especially under North Texas UV and hard water. Re-gelcoating restores factory-fresh condition without replacing the shell.

Fraction of the cost of full replacement
Color-matched or upgrade to a new color
Restores UV protection and chemical resistance
Addresses spider cracks and blistering
Extends pool life by 15–20 years

3–5 Day Turnaround Color-Matched

Get a Gelcoat Assessment

Full Gel Coat Restoration

Widespread oxidation and fading refinished as one unified coat.

Oxidation & UV Fade

Chalky, porous finish restored — common under North Texas sun.

Spider Crack Repair

Mixed-soil-driven cracks ground out and color-matched.

Osmotic Blister Repair

Blisters opened, laminate rebuilt, chemistry corrected.

What Is Pool Gel Coat — and Why Does Your Hurst Fiberglass Pool Need It?

Gel coat is the outermost layer of a fiberglass pool — the resin finish that provides color, gloss, chemical resistance, and UV protection. When a fiberglass pool looks faded, feels rough, or shows cracks or blisters, it's the gel coat that has degraded, not the structural shell beneath it.

Hurst's climate accelerates that degradation: long, intense summer UV oxidizes the surface, hard North Texas water dulls the gloss and traps algae, and the mixed Cross Timbers and expansive-clay ground movement stresses the shell into spider cracks at fittings and steps. Left unaddressed, degraded gel coat exposes the laminate beneath — turning a cosmetic issue into a structural one.

Signs Your Hurst Pool Needs Gel Coat Repair

Faded, chalky, or dull finish
Spider cracks on floor, walls, or around fittings
Osmotic blisters — raised bubbles on the surface
Rough texture in previously smooth areas
Gel coat separating from the shell
Persistent staining despite correct chemistry
Patchy color across pool and spa
Pool 10+ years old with no gel-coat service

Pool Gel Coat Repair Services in Hurst, TX

Hexagon diagnoses the root cause of every gel coat issue before beginning work — North Texas UV, hard water, and mixed Cross Timbers and expansive-clay movement each produce distinct failure patterns requiring different repair approaches. All work is color-matched to your existing finish or upgraded to a premium modern color.

Most Comprehensive

Full Gel Coat Restoration

When oxidation, fading, and minor surface damage are widespread across the pool, a full gel coat restoration is the most cost-effective approach. Hexagon mechanically prepares the entire surface, addresses all underlying defects, and applies a fresh, UV-stabilized gel coat layer across the pool and spa as a unified refinish. The result is a pool that looks, feels, and performs as it did when first installed — with a color-matched or upgraded finish carrying UV inhibitors engineered for North Texas's long, hot summers.

Complete pool and spa surface unified under new coat
Mechanically prepared — not chemically stripped
UV inhibitors resist the long North Texas summer
Choice of color match or premium color upgrade

Most Common in Hurst

Oxidation & UV Fade Repair

Oxidation is the most common gel coat issue on Hurst fiberglass pools — caused by sustained UV exposure breaking down the resin polymers in the gel coat surface. Across the long North Texas pool season, the finish loses its gloss, turns chalky white or gray, and becomes increasingly porous, holding algae and resisting cleaning. Hexagon's oxidation treatment removes the degraded surface layer, restores chemical resistance and UV protection, and brings the original color back to a like-new standard without shell replacement.

Chalky, dull finish restored — not polished over
Porous oxidized layer mechanically removed
Algae resistance restored for the full pool season
Effective on all fiberglass pool colors and ages across Hurst

Mixed-Soil Related

Spider Crack Repair

Spider cracks in fiberglass gel coat are a direct consequence of ground movement — and Hurst's mixed Cross Timbers soil over expansive-clay zones produces seasonal soil movement that stresses pool shells year after year. Spider cracks typically radiate from stress points: fittings, steps, corners, and floor areas. The Eastern Cross Timbers' sandy loam over clay expands when wet and contracts in summer drought and winter freeze, cycling stress through the shell. Hexagon repairs spider cracks by grinding each crack to sound material, filling and laminating the substrate, then applying a color-matched gel coat patch that is invisible under water.

Mixed Cross Timbers soil movement identified as root cause
Each crack ground to sound substrate — not filled over
Structural laminate repaired beneath the gel coat
Color-matched finish — invisible under water

Hard-Water Related

Osmotic Blister Repair

Osmotic blistering occurs when water molecules penetrate a compromised gel coat and accumulate between the gel coat and the fiberglass laminate, forming raised bubbles on the pool surface. In Hurst, the hard municipal water carries a mineral load that, at low pH, accelerates the osmotic process. Hexagon repairs blisters by opening each blister, cleaning the underlying cavity, rebuilding the laminate substrate, and applying gel coat over the repaired area. Water chemistry guidance is provided to prevent recurrence.

Every blister opened, cleaned, and rebuilt — not flattened
Underlying laminate damage addressed before gel coat
Hard North Texas water chemistry guidance provided
Prevents escalation to full delamination

Why Hurst Homeowners Should Not Delay Gel Coat Repair

Gel coat issues follow a predictable escalation path. What begins as a cosmetic problem — fading, minor cracking — becomes a structural and financial problem if left unaddressed through another North Texas pool season.

Cosmetic → Structural

Spider cracks left unfilled allow water to penetrate to the fiberglass laminate. Once water reaches the laminate under Hurst's mixed expansive-clay conditions, freeze-thaw and hydrostatic pressure cycles cause delamination — separating the gel coat from the shell in sheets. A small crack repair becomes a far larger delamination job within a few North Texas seasons.

The Long North Texas Pool Season

North Texas pools see a long swim season under intense summer sun. Every month a pool sits with oxidized, cracked, or blistered gel coat is a month of accelerated UV and chemical damage to the structural laminate beneath. Addressing gel coat deterioration in the cooler off-season protects the full season ahead and avoids emergency repairs when temperatures peak in July and August.

Hurst Resale Value

In the active HEB-area real estate market, a documented, warranted gel coat restoration signals a well-maintained pool to buyers. A pool in poor visible condition invites a price reduction or an inspection contingency; a restored, warranted surface protects the asking price and shortens time on market.

What to Expect: The Gel Coat Repair Process

Most Hurst gel coat repair projects complete in 3–5 days. Full restorations on pools with integrated spas typically take 5–7 days. No excavation, no heavy equipment, no disruption to your outdoor living space.

Day 1

Assessment & Drain

Hexagon technician inspects the full pool and spa surface under water and dry conditions. Failure type, extent, and root cause confirmed. Pool drained and surface allowed to dry before work begins.

Days 2–3

Surface Preparation

Defects addressed at substrate level — cracks ground and laminated, blisters opened and rebuilt, oxidized surface mechanically abraded. All preparation work is inspected before gel coat is applied.

Days 3–5

Gel Coat Application

Color-matched or upgraded gel coat applied in controlled layers across all repaired and restoration areas. Spa and pool surface unified under the same finish. Edge-to-edge blending ensures no visible repair lines.

Days 5–7

Cure, Polish & Handover

Gel coat cures under North Texas ambient conditions. Surface buffed to premium gloss. Full inspection completed. Hard North Texas water chemistry guidance provided. Warranty documentation issued at handover.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Hurst owners restoring an aging fiberglass pool to like-new condition without shell replacement.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Hurst owners preparing to sell — a documented, warranted restoration signals a well-maintained pool.

Restore Your Hurst Pool to Premium Condition

Hexagon assesses your fiberglass pool's gel coat, identifies every defect, and provides a fixed-price repair quote. Most jobs complete in 3–5 days.

Get Your Free Gel Coat Assessment

3–5 Day Turnaround

Fiberglass Pool Repair

Hurst's mixed Cross Timbers soil and hard water create fiberglass-specific challenges that require specialist techniques. Hexagon diagnoses and resolves the root cause — not just the symptom.

Leaks, surface damage, and cracks each need a different fix — see how our fiberglass swimming pool repair handles them.

All repairs color-matched to existing finish
Structural repairs address mixed-soil root cause
Most jobs completed in 3–5 days
Up to 5-year warranty on structural repair work

3–5 Day Turnaround Up to 5-Yr Warranty

Schedule a Repair Assessment

Structural Crack Repair

Mixed-soil expansion cracks laminated and color-matched.

Skimmer Repair & Replace

Cracked housings resealed against water migration.

Fitting & Line Leaks

Pressure- and dye-tested; shell penetrations resealed.

Step, Bench & Ledge

Delaminated layers re-bonded and reinforced.

Why Fiberglass Pool Repair in Hurst Requires a Different Approach

Fiberglass repairs aren't interchangeable with plaster or concrete repairs — and Hurst's conditions make the distinction critical. The dominant force on Hurst pools is the mixed Cross Timbers soil over expansive-clay zones, which expands and contracts with North Texas's wet-dry, freeze-thaw cycle and concentrates stress at fittings, steps, and shell seams.

Hexagon's repair process begins with a root-cause assessment, not just a visual inspection. We identify whether damage originates from soil movement, water chemistry, or structural fatigue — and address the underlying cause before any surface repair. Every repair is color-matched and warranted.

Pool Problems That Need Immediate Attention

Visible cracks on floor, walls, or around fittings
Water loss beyond normal evaporation
Skimmer pulling air — cracked housing or neck
Return fittings loose, leaking, or separating
Step or bench delamination
Bowing or bulging walls (soil pressure)
Repeated algae despite correct chemistry
Equipment pad flooding — possible shell leak

Pool Repair Services in Hurst, TX

From hairline gel coat cracks to structural shell repairs and full skimmer replacements, Hexagon handles every repair type found on Hurst pools — root-cause first, warranty-backed, color-matched to your finish.

Most Requested — Mixed Soil

Structural Crack Repair

Structural cracks in fiberglass pools are the direct result of ground movement — and Hurst's mixed Cross Timbers soil over expansive-clay zones produces some of the more unpredictable shrink-swell behavior in North Texas. Cracks typically appear on the pool floor above clay expansion zones, around fittings under directional soil pressure, and at corners where shell geometry concentrates stress. The wet-dry, freeze-thaw cycle cycles load through the shell year after year. Hexagon repairs structural cracks by exposing the outer shell face where necessary, applying fiberglass laminate to restore structural integrity, and finishing with a color-matched gel coat. The root cause — soil load or drainage — is documented and addressed as part of the repair scope.

Mixed Cross Timbers and clay-zone movement confirmed as root cause
Laminate repair restores structural shell integrity
Color-matched gel coat — invisible under water
Up to 5-year warranty on all structural crack repairs

Hurst Most Common

Skimmer Repair & Replacement

Skimmer failure is one of the most common repair calls on Hurst pools — and one of the most consequential if ignored. The skimmer housing is bonded to the pool shell at the waterline, a location that experiences the highest concentration of thermal cycling, soil movement, and UV exposure. North Texas's swing from winter freezes to 100°F+ summers creates continuous expansion and contraction stress at the skimmer-to-shell bond. Cracks at the skimmer neck or housing let water bypass the seal and migrate behind the shell, where it interacts with the expansive-clay zones to create sustained hydrostatic pressure. Hexagon repairs cracked housings, replaces failed skimmer bodies, reseals skimmer-to-shell bonds, and installs upgraded units where the original fitting is beyond repair.

Cracked skimmer neck repaired or housing replaced
Skimmer-to-shell bond resealed — thermal and soil movement are primary failure drivers
Upgraded skimmer units specified for the long North Texas season
Repair stops mineral-laden water infiltration behind the shell face

Water Loss Related

Fitting & Return Line Leak Repair

Return fittings, main drain covers, light housings, and spa jets are all penetration points in the fiberglass shell — and each is a potential leak source as sealants age and mixed soil movement applies shear force to bonded fittings. Hard North Texas water deposits mineral scale at penetration points that can compromise the seal bond over time. Unexplained water loss is typically traced to one or more fitting penetrations before a shell crack is confirmed. Hexagon performs a systematic pressure test and dye test to locate all active leaks, then repairs or replaces the affected fittings and reseals the shell penetration to current standards.

Systematic pressure and dye test locates every active leak
Fitting replacements address long-season sealant degradation
Shell penetrations resealed — soil movement shears original sealant bonds
Water loss confirmed resolved before pool is returned to service

Soil & Thermal Cycling

Step, Bench & Ledge Repair

Steps, benches, tanning ledges, and spa walls are the structural elements most vulnerable to delamination and cracking on Hurst pools. Differential soil settlement on mixed Cross Timbers and expansive-clay zones creates uneven support under horizontal surfaces — steps and ledges — causing separation between fiberglass laminate layers. North Texas thermal cycling between winter freezes and summer heat amplifies this stress at the bond line between horizontal and vertical shell sections. Pools with tanning ledges and integrated spas have more horizontal surface area exposed to these forces. Hexagon repairs delaminated steps and ledges by re-bonding the separated layers, applying structural reinforcement where needed, and finishing with a color-matched gel coat.

Delaminated layers re-bonded — not patched over
Differential soil settlement assessed and documented
Structural reinforcement applied on high-stress surfaces
Spa, step, and ledge surfaces color-unified on completion

Repair or Replace? Hexagon's Honest Assessment

Not every repair is worth making — and not every damaged pool needs replacing. Hexagon provides an honest structural assessment of every Hurst pool before quoting, with a clear recommendation based on what actually makes financial sense for the property.

When Repair Is the Right Call

Isolated structural cracks with no shell delamination, a single skimmer failure, fitting leaks on an otherwise sound shell, and step or ledge repairs on a pool with good underlying structure are all strong repair candidates. A targeted repair on a sound fiberglass shell typically extends pool life by 10–15 years at a fraction of resurfacing cost — particularly valuable across the long North Texas pool season, where every additional year of service has clear dollar value.

When Resurfacing Makes More Sense

When a pool has multiple simultaneous failure types — cracks, blistering, oxidation, and fitting leaks together — the cumulative repair cost often approaches resurfacing cost. In those cases, Hexagon recommends resurfacing over piecemeal repair: one fixed price, one process, a new surface, and a full warranty rather than multiple partial warranties on individual repairs. For Hurst pools with recurring crack cycles driven by mixed expansive soils, resurfacing with a fiberglass system permanently eliminates the cycle.

When the Shell Needs Replacing

Severe shell delamination, hydrostatic uplift — where the pool shell has floated due to groundwater pressure — or widespread structural failure from sustained soil loading are cases where repair is not viable. Hexagon will tell you directly when this is the situation — and provide a full replacement or conversion quote rather than charge for repairs that will not hold under Hurst's mixed soil conditions.

What to Expect: The Pool Repair Process

Most pool repair projects in Hurst complete in 3–5 days. Structural repairs involving excavation or skimmer replacement may extend to 7 days. No heavy equipment on your lawn — all work performed from pool deck level.

Day 1

Diagnosis & Drain

Root-cause assessment of all damage — pressure test, dye test, visual inspection dry and wet. Mixed Cross Timbers soil conditions and drainage documented. Repair scope confirmed before the pool is drained.

Days 2–3

Structural Work

Crack repair, skimmer replacement, fitting resealing, or laminate reinforcement completed at shell level. All structural work inspected and approved before the gel coat phase begins.

Days 3–4

Gel Coat Finishing

Color-matched gel coat applied over all repair areas. Blended edge-to-edge for an invisible finish. Skimmer surrounds and fitting flanges refinished to match the surrounding surface.

Days 4–5

Refill & Warranty

Pool refilled and water chemistry balanced for hard North Texas water. All repair work documented. Warranty issued — up to 5 years on structural repairs. Final walkthrough confirms every issue resolved.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Hurst owners with an isolated repair on an otherwise sound shell — extends pool life 10–15 years at a fraction of resurfacing cost.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Hurst owners weighing repair vs. resurface — Hexagon gives an honest recommendation based on what makes financial sense.

Don't Let a Small Repair Become a Costly Replacement

Hexagon assesses your Hurst pool, identifies every repair need, and gives you an honest recommendation — repair, resurface, or replace. Fixed-price quote, root-cause approach, warranted result.

Get Your Free Pool Repair Assessment

The right fix depends on the failure — see the full scope of our pool repair services.

Why Hurst Pools Benefit from Fiberglass

Mixed Soil

Cross Timbers Over Expansive Clay

Hurst straddles the Eastern Cross Timbers — sandy loam over clay — where it meets Grand Prairie limestone, with expansive-clay zones throughout. This mixed profile shifts unevenly, stressing pool shells differently from one part of a yard to the next.

Uneven soil movement cracks rigid plaster and gunite repeatedly
Fiberglass flexes with seasonal soil shift
No cracking from expansive-clay zones
Structural crack repair included in prep

Hard Water

Hard North Texas Water

The City of Hurst supplies treated municipal water sourced from Fort Worth via the Trinity River Authority — hard North Texas water that deposits scale on porous plaster and drives up the chemical and acid-washing burden.

Minerals stain and scale porous plaster
Non-porous fiberglass resists scale buildup
Up to 45% less chemical usage
No recurring acid-washing cycle

Heat & Freeze

100°F Summers, Winter Freezes

North Texas swings from 100°F+ summers to hard winter freezes. The expansion-and-contraction stress fractures rigid surfaces; fiberglass flexes with it.

Thermal cycling cracks plaster and concrete
Fiberglass gel coat resists UV fading
Flexes through freeze-thaw without cracking
Holds up across the long North Texas pool season

Veterans

Proud to Serve Hurst Veterans

The Mid-Cities are home to many veterans and active-duty families. We honor that service with a guaranteed 5% discount on every project — applied at booking, no paperwork battle.

5% veteran's discount — active duty, retired & surviving spouses
Non-disruptive install — no demolition
Same-week assessments for busy families

Result: For Hurst pools, fiberglass isn't a premium upgrade — it's the only surface that survives mixed Cross Timbers and Grand Prairie soils, hard North Texas water, and triple-digit-to-freeze cycling year after year.

Our Hurst Fiberglass Process

From Drain to Swim in Under 2 Weeks

01

Day 1

Assessment & Drain

Technician confirms system selection
Pool drain coordinated on-site
Water disposal per City of Hurst municipal regulations
HEXConvert™ or Fibre Tech™ confirmed

02

Days 2–3

Surface Preparation

Existing surface cleaned, etched, and profiled
Soil-driven structural cracks resolved before application
Landscaping and hardscape protected throughout

03

Days 4–6

System Application

Applied in multiple layers by certified technicians
Hand-crafted to every contour — walls, floor, steps
Quality checkpoints throughout

04

Days 7–8

Cure & Inspection

Cures under controlled conditions
North Texas summer heat accelerates the cure phase
Full quality inspection before refill authorized

05

Days 9–10

Refill & Warranty

Pool refilled, water chemistry balanced
Warranty documentation delivered
HEXConvert™: 10-yr comprehensive — starts day one
Fibre Tech™: 25-yr material — transfers with the property

No demolition required · Landscaping protected throughout · HOA documentation provided at completion

Schedule Your Assessment

Why Hurst Chooses Hexagon

Fiberglass specialists — meeting Hurst's standard

01

Mid-Cities Soil Specialists

Cross Timbers and Grand Prairie soil expertise across Hurst
Experienced throughout the HEB area — Hurst, Euless & Bedford

02

Full-Scale Capability

Equipped for pools of every size and complexity
Spa, water feature, and tanning ledge expertise
Landscaping and hardscape protection protocol

03

Industry Recognition

Texas Pool & Spa Association certified
Certified Pool Operators on every project
$2M liability insurance

04

Exclusive Technology

HEXConvert™ proprietary to Hexagon
Exclusive Fibre Tech™ materials
Methods developed over 3 decades
Factory direct quality assurance

Our Hurst Service Area

Proudly serving Hurst and surrounding areas within a 30-mile radius.

(972) 789-2983Click to call

Hurst Neighborhoods We Serve

Trusted by homeowners across Hurst's Mid-Cities neighborhoods

Central

Central Hurst & Hurst Hills

Hurst Hills Hurst Creek Bellaire Park the area around Central Park

Specialty Resurfacing aging plaster on established Mid-Cities pools

Challenge Mixed Cross Timbers soil shifting older shells, hard-water scaling

North

North Hurst & NE Mall Area

Northeast Crossing North Tarrant the area around NE Mall Cimarron Hills

Specialty Conversions and structural crack repair on mid-life pools

Challenge Expansive-clay zones cracking gunite season after season

South

South Hurst

Meadowcreek Brookhollow Shady Brook Midway Park

Specialty Vinyl-liner conversions and gel-coat restoration on established homes

Challenge End-of-life surfaces on pools near the Euless and Bedford borders

Mid-Cities

Greater Hurst & the HEB Area

Hurst plus neighboring Euless Bedford & North Richland Hills

Specialty Full conversions and gel-coat restoration across the Mid-Cities

Challenge Same mixed soils and hard North Texas water across the HEB area

Service Area

All Hurst neighborhoods covered

Every Hurst neighborhood — from Hurst Hills to the established pools near the Euless and Bedford borders — receives the same quality standards, materials, and warranty protection. Veterans discount applied at booking, regardless of which part of the city you call home.

Confirm Your Coverage

Investment Analysis

What Fiberglass Actually Costs You Over Time

Hurst homeowners who switch to fiberglass save an average of $20,500 over 15 years compared to the traditional replaster cycle.

Cost Item	Plaster (15 yrs)	Fiberglass (15 yrs)
Resurfacing / Replaster	$20,000–$27,0002 replasters	$0
Annual Chemical Costs	$1,100–$1,450/yr	$550–$750/yr50% less
Algae Treatment & Cleanup	$400–$500/yr	$125–$150/yr
Surface Repairs	$1,700–$2,200 over life	Warranty covered
15-Year Total Cost	$44,000–$58,000	$26,000–$35,000

Estimates based on Tarrant County market averages. Actual savings vary by pool size and condition.

Average Hurst Homeowner Saves

$20,500

over 15 years by switching from plaster to fiberglass — one of the most cost-effective long-term decisions for your pool.

Calculate My Savings

Frequently Asked Fiberglass Pool Questions

Most pool resurfacing projects in Hurst take 7-10 days from start to finish, depending on pool size and weather conditions.

Yes! We serve Hurst, Bedford, Euless, North Richland Hills, and all Mid-Cities communities. Call us at (972) 789-2983 to confirm service in your area.

Costs vary by pool size and condition. Most Hurst homeowners save $20,000-$40,000 over 25 years by eliminating repeated resurfacing cycles.

Call us at (972) 789-2983 for a free consultation. We'll assess your pool, discuss options, and provide a detailed quote with no obligation.

HEXConvert™ Resurfacing is our proprietary fiberglass resurfacing system. We bond a multi-layer fiberglass-and-gelcoat surface over your existing concrete, gunite, or plaster shell to create one continuous, non-porous, factory-smooth finish. Unlike plaster — which has to be redone every 7–10 years — a HEXConvert™ surface is a one-time installation backed by a 10- or 25-year warranty.

Re-Gel is the gelcoat-renewal stage of the HEXConvert™ system. We apply a fresh, color-matched gelcoat over the fiberglass to restore the smooth, glossy finish and protect it against UV, pool chemicals, and everyday wear — bringing an existing fiberglass surface back to like-new condition without a full rebuild.

Fiberglass lasts 25+ years vs 7-10 for plaster, reduces chemical usage by 75%, prevents algae growth, and never needs acid washing.

Our 25-year warranty covers the fiberglass shell against structural defects, delamination, blistering, and fading. It's transferable to future homeowners.

Both deliver the same smooth, permanent fiberglass surface — the difference is the warranty. HEXConvert™ is our proprietary system with a 10-year comprehensive (labor and materials) warranty and the fastest install. Fibre Tech™ carries a 25-year transferable material warranty, ideal if you may sell since it follows the home. We'll help you choose at the consultation.

Yes! Pool conversion works excellently for old or damaged pools. In fact, conversion is often the best solution for aging pools with cracks, surface deterioration, or structural issues. Our Fibre Tech™ system bonds directly to your existing concrete/gunite structure and can bridge minor cracks while providing structural reinforcement. We've successfully converted pools that are 30+ years old. During your free consultation, we'll assess your pool's condition and recommend the best approach for your specific situation.

Yes! Our Fibre Tech™ technology is custom-molded to fit any pool shape and size, from standard rectangles to custom freeform designs.

Your pool will look better! You can choose from various colors and the smooth gel-coat surface is more attractive than weathered plaster.

Absolutely! Fiberglass is completely salt-resistant, unlike concrete which can deteriorate from salt exposure.

Usually no. Most existing equipment works perfectly with fiberglass. We'll assess during consultation and recommend upgrades only if beneficial.

LIMITED TIME — Hurst Fiberglass Special

Save $1,500 on Your Pool Conversion

Book your Hurst fiberglass assessment before July 4, 2026

$1,500 OFFany conversion over $15,000

Complimentarypool assessment ($500 value)

0% Financingfor 18 months (qualified buyers)

Veterans 5% Discountactive duty, retired & surviving spouses

Exclusive to Hurst fiberglass projects. Limited appointments available.

Start Your Transformation — 972-789-2983

Hurst Fiberglass Pool Repair & Resurfacing 7-10 Day Install

Get Your Complimentary Hurst Quote

Hurst Pool Services

Fiberglass Pool Resurfacing

Fiberglass Pool Conversion

Pool Gelcoat Repair

Fiberglass Pool Repair

Why Hurst Pools Benefit from Fiberglass

Cross Timbers Over Expansive Clay

Hard North Texas Water

100°F Summers, Winter Freezes

Proud to Serve Hurst Veterans

Our Hurst Fiberglass Process

Assessment & Drain

Surface Preparation

System Application

Cure & Inspection

Refill & Warranty

Why Hurst Chooses Hexagon

Mid-Cities Soil Specialists

Full-Scale Capability

Industry Recognition

Exclusive Technology

Our Hurst Service Area

Hurst Neighborhoods We Serve

Central Hurst & Hurst Hills

North Hurst & NE Mall Area

South Hurst

Greater Hurst & the HEB Area

All Hurst neighborhoods covered

What Fiberglass Actually Costs You Over Time

Frequently Asked Fiberglass Pool Questions

1 How long does pool resurfacing take in Hurst?

2 Do you service all Mid-Cities neighborhoods?

3 How much does fiberglass conversion cost?

4 How do I get started?

5 What is HEXConvert™ Resurfacing?

6 What is HEXConvert™ Re-Gel?

7 What makes fiberglass better than plaster?

8 What's included in your 25-year warranty?

9 Should I choose HEXConvert™ or Fibre Tech™?

10 Will conversion work for an old or damaged pool?

11 Can you convert any pool shape?

12 Will my pool look different after conversion?

13 Is fiberglass safe for saltwater systems?

14 Do I need to replace my pool equipment?

Save $1,500 on Your Pool Conversion

Your Home Deserves a Pool Surface That Matches It