Fiberglass Pool Repair & Resurfacing Lakeway

Lakeway Pool Services

Complete fiberglass solutions for luxury pools of any size and complexity

Fiberglass Pool Resurfacing

Lakeway's Hill Country pools were built to impress — but plaster and marcite can't survive LMUD hard water and the extended March–November swim season without replastering every five to seven years. Fiberglass ends that cycle permanently and delivers the surface finish your property demands.

✓Permanent surface vs. recurring $12,000–$20,000 replastering
✓Glass-smooth — never rough, stained, or scaled again
✓Up to 45% reduction in chemical usage
✓Algae-resistant non-porous surface
✓Choice of 10-yr or 25-yr transferable warranty

7-10 Day Install 10 or 25-Yr Warranty HOA Documentation Included

Learn About Lakeway Resurfacing

What Is Pool Resurfacing — and Why Does Your Lakeway Pool Need It?

Pool resurfacing is the process of removing or overcoating your pool's existing interior finish and applying a new, durable surface layer directly to the shell. Every pool surface degrades over time — plaster chalks and stains, marcite roughens and scales, vinyl liners fade and tear. In Lakeway, that degradation is accelerated by three compounding factors: LMUD-supplied hard water (150–200 mg/L from Lake Travis) that deposits calcium scale on porous surfaces, a long, intense March–November pool season that subjects surfaces to sustained UV exposure and thermal cycling, and Hill Country caliche and limestone substrate conditions that affect drainage around pool shells.

Left unaddressed, a failing pool surface becomes progressively more expensive. A rough plaster finish abrades swimmers and holds algae; stained or etched surfaces require repeated acid washing that removes surface material and shortens the replacement cycle; cracks and delamination allow water migration behind the shell, which — on a caliche and limestone substrate site — can cause hydrostatic pressure that damages the shell itself. Resurfacing before the surface reaches failure is always less expensive than remediation after it.

Signs Your Lakeway Pool Needs Resurfacing

⚠ Rough or sandpaper texture on pool floor and walls
⚠ Persistent staining that acid washing no longer removes
⚠ Visible cracks, chips, or delaminating patches
⚠ Chalky white calcium deposits or efflorescence
⚠ Recurring algae despite correct chemical balance
⚠ Fading, discoloration, or uneven finish color
⚠ Unexplained water loss (surface micro-leaks)
⚠ Surface age over 7 years on plaster or marcite

Pool Resurfacing Services in Lakeway, TX

Hexagon resurfaces every pool type found in Lakeway — from aging plaster gunite pools in Rough Hollow and The Hills of Lakeway to vinyl-liner pools in Serene Hills. All paths lead to the same outcome: a permanent fiberglass surface engineered for Central Texas Hill Country conditions.

Most Common

Plaster & Marcite Pool Resurfacing

The majority of Lakeway pools built before 2015 have white plaster or marcite interiors — surfaces that perform poorly in LMUD's 150–200 mg/L Lake Travis water. On Lakeway's 700–1,000 sq ft Hill Country pools, the 7-year replaster cycle means a recurring $10,000–$16,000 cost on a surface that begins calcium etching from day one regardless of contractor quality. Hexagon removes the deteriorated surface, repairs all substrate drainage-related structural cracking in the gunite shell, and applies HEXConvert™ or Fibre Tech™ fiberglass — ending the replaster cycle for the life of the pool.

✓ Replastering eliminated — not deferred, not rescheduled
✓ Substrate drainage and structural crack repair included in preparation
✓ Fiberglass bonds directly to Lakeway's Hill Country gunite shells
✓ Glass-smooth finish meets the resort-quality visual standard Rough Hollow and The Hills of Lakeway properties require

Growing Demand

Pebble & Aggregate Finish Resurfacing

Pebble Tec, Pebble Sheen, and exposed-aggregate finishes were popular on Lakeway pools built between 2005 and 2018. While striking when new, these surfaces are particularly vulnerable in LMUD's 150–200 mg/L Lake Travis water — mineral deposits fill aggregate gaps within 8–10 years, creating a texture that abrades swimmers and demands intensive chemical balancing. In Lakeway's Hill Country water environment, this surface ages faster than in softer-water markets. Fiberglass resurfacing over aggregate eliminates the roughness permanently, restoring the pool to the resort-quality visual standard that Lakeway's Lake Travis properties require.

✓ Restores the premium resort aesthetic Lakeway Hill Country properties require
✓ Applied over existing aggregate — no decking or landscaping disruption
✓ Glass-smooth finish meets Rough Hollow and The Hills of Lakeway pool standards
✓ Unified surface across pool, spa, and tanning ledge

Vinyl Liner Pools

Vinyl Liner Pool Resurfacing

Vinyl liner pools in Lakeway face a $4,500–$7,500 replacement cost every 7–10 years, with no improvement to the underlying shell condition. On Lakeway's Lake Travis properties, a vinyl liner surface is also an aesthetic compromise — visible seams and limited design consistency are inconsistent with Rough Hollow and The Hills of Lakeway community standards. Hexagon resurfaces vinyl liner pools by preparing the existing shell structure and applying a permanent fiberglass interior — delivering a seamless resort-quality surface that eliminates liner replacement costs entirely.

✓ Liner replacement cycle ends permanently
✓ No ongoing $4.5–7.5k liner costs on Lakeway's Hill Country pools
✓ Permanent non-porous surface — HOA-documentable and transferable
✓ Handles custom Lakeway pool shapes, spas, infinity shelves, and tanning ledges

Existing Fiberglass

Fiberglass Pool Re-Resurfacing

Fiberglass pools 15–25 years old often show oxidation, gel coat fading, osmotic blistering, or spider cracking — particularly on pools with prolonged Central Texas Hill Country sun exposure and LMUD mineral deposit accumulation. On Lakeway's Lake Travis properties, a degraded fiberglass surface is a visible liability in communities where outdoor presentation matches the surrounding landscape. Hexagon grinds, repairs, and applies a fresh HEXConvert™ or Fibre Tech™ system over the existing shell — restoring resort-quality appearance with full warranty coverage from day one.

✓ Restores pool surfaces dulled by Hill Country UV exposure and LMUD mineral buildup
✓ Blisters and substrate-pressure spider cracks repaired before application
✓ Full warranty — meets Lakeway Hill Country property documentation standards
✓ 15–20 year life extension on pools built for Lakeway's Lake Travis properties

Why Fiberglass Resurfacing — Not Replaster, Pebble Tec, or Epoxy Paint

Lakeway homeowners are typically presented with four resurfacing options. Here is an honest comparison of how each performs in Central Texas Hill Country conditions over a 20-year ownership horizon.

Surface Type	Lifespan	20-Yr Cost	Hard Water	Clay Soil
White Plaster	5–7 yrs	$60k–$114k	Scales heavily	Cracks with movement
Marcite	6–8 yrs	$54k–$96k	Stains & scales	Cracks with movement
Pebble / Aggregate	8–12 yrs	$45k–$72k	Roughens quickly	Cracks with movement
Epoxy Paint	2–4 yrs	$70k–$100k+	Peels & blisters	Delamination risk
✓ HEXConvert™ / Fibre Tech™ Fiberglass	20–30 yrs	$14k–$22k	Non-porous — no scale	Flexes — no cracking

* 20-year cost estimates based on Lakeway pool averages (700–1,000 sq ft). Includes material, labor, and chemistry costs per cycle.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

✓10-year comprehensive labor & materials warranty
✓Fastest installation path — 7 days typical
✓Ideal for pools staying with current owner 10+ years
✓Available in 8 premium color options

Best for: Lakeway homeowners who plan to stay long-term — one HEXConvert™ installation permanently ends the LMUD hard water replastering cycle on their Lake Travis pool, with no further surface costs for the life of their ownership.

Industry Standard

Fibre Tech™

✓25-year transferable material warranty
✓Warranty transfers to next owner — adds resale value
✓Preferred for properties in HOA communities with resale plans
✓Available in 12 premium color options

Best for: Lakeway homeowners preparing their home for sale — the 25-year Fibre Tech™ transferable warranty is a documented pool asset that buyers and real estate attorneys recognize at closing, and that HOA architectural committees in Rough Hollow and The Hills of Lakeway acknowledge as a premium finish.

Your Lakeway Pool Deserves a Permanent Surface

Hexagon assesses your Lakeway pool, confirms the right system for your HOA requirements and Hill Country conditions, and gives you a fixed-price quote — no surprises, no upsells, no replaster in 7 years.

Get Your Free Lakeway Resurfacing Assessment

Save $20k–$40k lifetime

Fiberglass Pool Conversion

Vinyl liner, gunite, concrete, or aging fiberglass — Hexagon converts pools of any size and configuration to superior fiberglass without excavation. No disruption to your landscaping, decking, or outdoor living space.

Vinyl liner → fiberglass

Eliminates $5–8k annual liner replacement costs

Gunite → fiberglass

Permanently ends substrate-driven structural cracking

Concrete → fiberglass

Stops the Central Texas Hill Country maintenance cycle

Fiberglass restoration

Modern surface, extended life, transferable warranty

HEXConvert™

10-yr comprehensive warranty

Fibre Tech™

25-yr transferable warranty

Explore Lakeway Conversion

What Is a Fiberglass Pool Conversion — and Is It the Right Choice for Your Lakeway Pool?

A fiberglass pool conversion is a complete interior system change — transforming your existing pool from its current surface technology (vinyl liner, plaster, gunite, concrete) to a permanent, non-porous fiberglass shell. Unlike resurfacing, which preps and overcoats a surface that still has usable structure, conversion is the appropriate choice when the underlying system itself has reached the end of its viable life: when a vinyl liner pool has had two or more liner replacements, when a gunite shell has sustained repeated structural cracking from seasonal ground movement, or when the cost of continued maintenance now rivals the cost of a one-time permanent solution.

Critically, Hexagon performs fiberglass pool conversions without excavation and without disruption to your existing decking, landscaping, or outdoor living infrastructure. For Lakeway properties — where mature Hill Country landscaping, custom hardscape, and HOA-governed exteriors make any ground disturbance costly and complicated — this is the deciding factor. The entire conversion is completed from inside the pool in 7–10 days, with zero contact with surrounding property.

You're a Conversion Candidate If…

✓ Your vinyl liner has been replaced once or more already
✓ Your gunite or concrete pool cracks recur after every repair
✓ Annual maintenance costs exceed $3,000 with no improvement
✓ Your pool surface has multiple simultaneous failure types
✓ You're planning a renovation and want a permanent solution
✓ Your pool is 15+ years old and has never had a system upgrade
✓ You want to eliminate all future resurfacing from your budget
✓ You're preparing the property for sale and want a warranty asset

Fiberglass Pool Conversion by Pool Type

Hexagon converts every pool type found in Lakeway. The conversion method is tailored to the existing shell structure — but the outcome is always the same: a permanent, low-maintenance fiberglass interior with full warranty coverage.

Most Requested

Gunite & Shotcrete Pool Conversion

Gunite and shotcrete pools are the most common pool type in Lakeway's established neighborhoods — Rough Hollow, The Hills of Lakeway, Old Lakeway, and Lohmans Crossing. Over time, Hill Country caliche substrate drainage patterns and seasonal ground movement cause the gunite shell to develop structural cracks that return after every repair. Fiberglass conversion permanently ends this cycle by applying a flexible, non-porous surface that accommodates the ground movement that makes rigid concrete crack.

✓ Hill Country caliche substrate load confirmed and documented — not just noted as a risk
✓ Mature Lakeway lot tree root intrusion assessed and addressed before application
✓ Pool volume, spa, and tanning ledge fully unified under one fiberglass surface
✓ Full warranty — transferable for Rough Hollow, The Hills of Lakeway, and Serene Hills resale

Highest ROI

Vinyl Liner Pool Conversion

Vinyl liner pools in Lakeway face a $4,500–$7,500 replacement cost every 7–10 years, with no improvement to the underlying shell condition. On Lakeway's Lake Travis properties, a vinyl liner surface is also an aesthetic compromise — visible seams and limited design consistency are inconsistent with Rough Hollow and The Hills of Lakeway community standards. Hexagon converts the existing shell to permanent fiberglass — with complete HOA documentation for the improvement.

✓ Custom liner fabrication costs eliminated on non-standard pool shapes
✓ Fiberglass handles every Lakeway pool configuration — spa, infinity shelf, tanning ledge, water feature inlets
✓ Permanent non-porous surface — HOA-documentable and transferable at Lake Travis market closing
✓ Payback period 10–12 years through eliminated liner costs plus reduced chemical spend

Full System Upgrade

Concrete Block Pool Conversion

Older concrete block pool shells — found on some of Lakeway's established lots with pools built in the 1990s and early 2000s — are particularly vulnerable to mortar degradation and water infiltration. Hexagon waterproofs and stabilizes the block structure before applying fiberglass, creating a sealed, unified interior surface that stops water migration and restores the pool to full structural integrity.

✓ Block structure assessed and stabilized — root intrusion from mature Lakeway lot trees documented
✓ Mortar joints sealed against LMUD hard water infiltration
✓ Water migration behind shell permanently stopped
✓ Preserves mature landscaping and custom hardscape — zero excavation

Premium Upgrade

Fiberglass-to-Fiberglass Conversion

An existing fiberglass pool with a failing original surface — osmotic blistering, deep spider cracks, severe oxidation, or delamination — is a strong fiberglass conversion candidate. Rather than attempting a patch-and-repair cycle on a compromised gel coat, Hexagon removes the failed surface layer, inspects and repairs the structural shell, and applies a fresh HEXConvert™ or Fibre Tech™ system. The result is a pool that performs identically to a new fiberglass installation, with full warranty coverage.

✓ Failed gel coat fully removed — LMUD mineral scale evaluated pre-application
✓ Shell structural inspection confirms Hill Country substrate-stressed shell integrity
✓ Full Fibre Tech™ or HEXConvert™ warranty — transferable for Lakeway Lake Travis property resale
✓ Preferred over repeated patch repairs on Rough Hollow and The Hills of Lakeway aging pools

Why Lakeway Homeowners Choose Conversion Over Continued Maintenance

The financial case for conversion is straightforward when you compare the cumulative cost of maintaining a traditional surface against the one-time cost of a permanent fiberglass system.

No Excavation. No Disruption.

The entire conversion is performed from inside the pool. No digging, no equipment on your lawn, no damage to decking, irrigation, or landscaping. For properties with mature trees, custom hardscape, and HOA exterior restrictions, this is non-negotiable. Hexagon has never required ground disturbance for a conversion project.

The 20-Year Financial Case

A Lakeway pool on a traditional plaster or vinyl liner cycle costs $60,000–$104,000 over 20 years in surface maintenance alone. A one-time fiberglass conversion costs $14,000–$22,000 and requires no further surface work within the warranty period. The delta — $40,000–$80,000 — is the conversion's return on investment over a 20-year horizon.

HOA-Ready Documentation

Lakeway's HOA communities — Rough Hollow, The Hills of Lakeway, Serene Hills, Tessera — require documentation for exterior improvements. Hexagon provides full architectural review packages, City of Lakeway Development Services permit coordination, and completion documentation at no additional charge. Every conversion leaves the property with a documented, warranty-backed improvement on file.

Your Conversion System: HEXConvert™ or Fibre Tech™

Both systems deliver a permanent fiberglass interior. Your choice determines warranty depth and transferability.

Hexagon-Proprietary

HEXConvert™

✓10-year comprehensive labor & materials warranty
✓Fastest completion — 7-day average
✓Ideal for long-term owners with no near-term sale plans
✓Available in 8 premium color options

Best for: Lakeway homeowners maximizing long-term value — one HEXConvert™ conversion replaces decades of plaster, liner, and acid wash cycles on a pool built for a Lakeway Lake Travis property.

Industry Standard

Fibre Tech™

✓25-year transferable material warranty
✓Warranty transfers to next owner — a documented resale asset
✓Preferred for owners with a 5–10 year sale horizon
✓Available in 12 premium color options

Best for: Lakeway homeowners listing in the $800K+ market — the 25-year Fibre Tech™ transferable warranty is a documented listing differentiator that Rough Hollow and The Hills of Lakeway buyers and appraisers recognize at closing.

Lakeway Pools Deserve a Permanent Interior

Hexagon assesses your Lakeway pool's existing structure, recommends the right system for your HOA and Hill Country conditions, and gives you a fixed-price quote. No excavation. No disruption to mature landscaping. Done in 7–10 days.

Get Your Free Conversion Assessment

Full Gel Coat Restoration

Complete color-matched refinish — spa and pool surface unified

Oxidation & Fade Removal

Restores Central Texas Hill Country sun-faded fiberglass to premium original gloss

Spider Crack Filling

Substrate-movement cracks filled and color-matched before gelcoat

Blister & Delamination Fix

Blisters ground out, base repaired, gelcoat applied over top

Existing Fiberglass Pools

Re-Gelcoat Restoration

Already have a fiberglass pool? Lakeway fiberglass pools face an accelerated degradation profile unique to the Hill Country: LMUD mineral deposits at 150–200 mg/L from Lake Travis, a Central Texas swim season running from March through November, and UV exposure among the highest in the HFP service area. Re-gelcoating restores like-new appearance without shell replacement — and delivers a surface that meets the documentation and aesthetic standards of Rough Hollow, The Hills of Lakeway, and other Lakeway HOA communities.

✓Fraction of the cost of full pool replacement
✓Color-matched or upgrade to a modern premium finish
✓Restores UV protection and chemical resistance
✓Addresses spider cracks and blistering simultaneously
✓Extends pool life by 15–20 years

Get a Re-Gelcoat Assessment

What Is Pool Gel Coat — and Why Do Lakeway Fiberglass Pools Need Repair?

Gel coat is the outermost layer of a fiberglass pool — a resin-based protective finish that provides the pool's color, gloss, chemical resistance, and UV protection. It is what you see, touch, and swim against. When your fiberglass pool looks faded, feels rough, or shows cracks and blisters, it is the gel coat that has degraded — not the structural fiberglass shell beneath it.

Lakeway's climate accelerates gel coat degradation faster than national averages. The Central Texas swim season runs March through November — nine months of sustained UV exposure at an index that regularly exceeds 7, combined with August heat indexes above 105°F. LMUD-supplied water at 150–200 mg/L from Lake Travis deposits calcium on gel coat surfaces, dulling gloss and creating surface roughness that traps algae. South-facing pools on Lakeway's Hill Country lots — common in Rough Hollow, Waterside, and The Hills of Lakeway — receive near-constant sun exposure that compounds oxidation year over year. Left unaddressed, degraded gel coat exposes the structural laminate beneath it to chemical penetration, which turns a cosmetic issue into a structural one.

Signs Your Lakeway Pool Needs Gel Coat Repair

→ Faded, chalky, or dull finish — color no longer vibrant
→ Spider cracks on pool floor, walls, or around fittings
→ Osmotic blisters — raised bubbles on the pool surface
→ Rough or sandpaper texture in previously smooth areas
→ Visible delamination — gel coat separating from shell
→ Persistent staining despite correct water chemistry
→ Patchy color inconsistency across pool and spa surfaces
→ Pool is 10+ years old and has never had a gel coat service

Pool Gel Coat Repair Services in Lakeway, TX

Hexagon diagnoses the root cause of every gel coat issue before beginning work — LMUD hard water, Hill Country UV load, and substrate movement each produce distinct failure patterns that require different repair approaches. All work is color-matched to your existing finish or upgraded to a premium modern color.

Most Comprehensive

Full Gel Coat Restoration

When oxidation, fading, and minor surface damage are widespread across the pool, a full gel coat restoration is the most cost-effective approach. Hexagon mechanically prepares the entire surface, addresses all underlying defects, and applies a fresh, UV-stabilized gel coat layer across the pool and spa as a unified refinish. The result is a pool that looks, feels, and performs as it did when first installed — with a color-matched or upgraded finish.

✓ Complete pool, spa, and tanning ledge surface unified under new coat
✓ Mechanically prepared — not chemically stripped
✓ UV inhibitors engineered for Lakeway's Hill Country sun exposure
✓ Color match or premium upgrade — both meet Rough Hollow and The Hills of Lakeway visual standards

Hill Country Most Common

Oxidation & UV Fade Repair

Oxidation is the most common gel coat issue on Lakeway pools — caused by sustained UV exposure breaking down the resin polymers in the gel coat surface over the long March–November swim season. The finish loses its gloss, turns chalky white or gray, and becomes increasingly porous, holding algae and resisting cleaning. Hexagon's oxidation treatment removes the degraded surface layer, restores chemical resistance and UV protection, and brings the original color back to a like-new standard without full shell replacement.

✓ Chalky, dull finish restored to the resort-quality gloss Lakeway properties require
✓ Porous oxidized layer removed — not polished over
✓ Algae resistance restored — critical for pools visible from Lakeway HOA common areas
✓ Effective on all fiberglass pool colors, ages, and Hill Country pool formats

Substrate Related

Spider Crack Repair

Spider cracks in fiberglass gel coat are a direct consequence of ground movement — and Lakeway's Hill Country caliche and limestone substrate, with its drainage patterns and seasonal shifts, produces consistent stress on pool shells. Spider cracks typically radiate from stress points: fittings, steps, corners, and floor areas above drainage zones. Hexagon repairs spider cracks by grinding out each crack to sound material, filling and laminating the substrate, then applying a color-matched gel coat patch that is invisible under water.

✓ Hill Country substrate drainage + ground movement confirmed as root cause
✓ Each crack ground to sound substrate — not filled over
✓ Structural laminate repaired beneath the gel coat
✓ Color-matched finish — invisible under water on Lakeway pool surfaces

Water Chemistry Related

Osmotic Blister Repair

Osmotic blistering occurs when water molecules penetrate a compromised gel coat and accumulate between the gel coat and the fiberglass laminate, forming raised bubbles on the pool surface. In Lakeway, LMUD hard water chemistry imbalances — particularly low pH combined with elevated calcium from Lake Travis — accelerate the osmotic process. Hexagon repairs blisters by opening each blister, cleaning the underlying cavity, rebuilding the laminate substrate, and applying gel coat over the repaired area. Water chemistry guidance is provided to prevent recurrence.

✓ Every blister opened, cleaned, and rebuilt — not flattened
✓ Underlying laminate damage addressed before gel coat
✓ LMUD hard water chemistry guidance specific to Lakeway's 150–200 mg/L Lake Travis supply
✓ Prevents escalation to full delamination on pools with integrated spas and tanning ledges

Why Lakeway Homeowners Should Not Delay Gel Coat Repair

Gel coat issues follow a predictable escalation path. What begins as a cosmetic problem — fading, minor cracking — becomes a structural and financial problem if left unaddressed.

Cosmetic → Structural

Spider cracks that remain unfilled allow water to penetrate to the fiberglass laminate. Once water reaches the laminate in a Hill Country caliche substrate environment, hydrostatic pressure cycles cause delamination — separating the gel coat from the shell in sheets. A $400 crack repair becomes a $4,000 delamination job within two to three Central Texas Hill Country seasons.

HOA Visibility

Lakeway's HOA communities conduct exterior inspections. A visibly faded, cracked, or stained pool surface is grounds for a compliance notice in communities like Rough Hollow and The Hills of Lakeway. Addressing gel coat deterioration proactively avoids HOA correspondence, remediation deadlines, and the reputational cost of a non-compliant exterior on a Lake Travis property.

Resale Presentation

In Lakeway's $800K+ Lake Travis market, pool condition is a material factor in buyer perception and appraisal. A professionally restored gel coat — documented, warranted, and visually premium — positions the pool as an asset rather than a liability in a listing. Buyers in Rough Hollow, The Hills of Lakeway, and Serene Hills expect every detail to be maintained to resort standard.

What to Expect: The Gel Coat Repair Process

Most Lakeway gel coat repair projects complete in 3–5 days. Full restorations on pools with integrated spas typically take 5–7 days. No excavation, no heavy equipment, no disruption to your outdoor living space.

Day 1

Assessment & Drain

Hexagon technician inspects the full pool and spa surface under water and dry conditions. Failure type, extent, and root cause confirmed. Pool drained and surface allowed to dry before work begins.

Days 2–3

Surface Preparation

Defects addressed at substrate level — cracks ground and laminated, blisters opened and rebuilt, oxidized surface mechanically abraded. All preparation work is inspected before gel coat is applied.

Days 3–5

Gel Coat Application

Color-matched or upgraded gel coat applied in controlled layers across all repaired and restoration areas. Spa and pool surface unified under the same finish. Edge-to-edge blending ensures no visible repair lines.

Days 5–7

Cure, Polish & Handover

Gel coat cures under Central Texas Hill Country ambient conditions. Surface buffed to premium gloss. Full inspection completed. Water chemistry guidance provided. Warranty documentation issued at handover.

Restore Your Lakeway Pool to Premium Condition

Hexagon assesses your fiberglass pool's gel coat, identifies every defect, and provides a fixed-price repair quote. Most jobs complete in 3–5 days — no disruption to your property or HOA standing.

Get Your Free Gel Coat Assessment

Gel Coat Restoration

Color-matched fiberglass refinishing

Structural Repair

Spider crack elimination

Osmotic Blister Repair

Comprehensive surface restoration

Complete Refinishing

Full surface renewal, extended life

3–5 Day Turnaround

Fiberglass Pool Repair

Lakeway pool repair requires diagnosing causes specific to this Hill Country environment: LMUD's 150–200 mg/L Lake Travis water infiltrating plaster fractures, caliche and limestone substrate drainage patterns affecting shell stress from below, and resort-style configurations — infinity edges, attached spas, tanning shelves — that standard patch-and-fill approaches don't address correctly. Hexagon diagnoses every failure to its root cause before repair materials are applied.

✓All repairs color-matched to existing finish
✓Structural repairs address substrate drainage and ground movement root cause
✓Most jobs completed in 3–5 days
✓Up to 5-year warranty on structural repair work

Schedule a Repair Assessment

Why Fiberglass Pool Repair in Lakeway Requires a Different Approach

Fiberglass pool repairs are not interchangeable with plaster or concrete repairs — and Lakeway's conditions make the distinction critical. The dominant forces acting on Lakeway pools are Hill Country caliche and limestone substrate drainage patterns, LMUD hard water chemistry at 150–200 mg/L from Lake Travis, and resort-style configurations that concentrate stress at fittings and horizontal surfaces. A repair that does not account for these forces will fail again within one to two seasons.

Hexagon's repair process begins with a root-cause assessment, not just a visual surface inspection. We identify whether damage originates from substrate movement, water chemistry, root intrusion, or structural fatigue — and address the underlying cause before applying any surface repair. Every repair is color-matched to your existing gel coat and warranted, so the finished result is invisible underwater and backed in writing.

Pool Problems That Need Immediate Attention

! Visible cracks on pool floor, walls, or around fittings
! Water loss exceeding ¼ inch per day (beyond evaporation)
! Skimmer pulling air — cracked housing or broken neck
! Return fittings loose, leaking, or showing separation
! Step or bench delamination pulling away from shell
! Bowing or bulging in pool walls (soil pressure)
! Repeated algae bloom despite correct chemistry
! Equipment pad flooding — possible shell or plumbing leak

Pool Repair Services in Lakeway, TX

From hairline gel coat cracks to structural shell repairs and full skimmer replacements, Hexagon handles every repair type found on Lakeway pools — root-cause first, warranty-backed, color-matched to your finish.

Most Requested — Hill Country

Structural Crack Repair

Structural cracks in fiberglass pools result from ground movement and substrate stress — and Lakeway's Hill Country caliche and limestone substrate, with its drainage patterns and seasonal shifts, produces consistent pressure on pool shells. Cracks typically appear on the pool floor above substrate drainage zones, around fittings under directional ground pressure, and along walls adjacent to mature root systems. Hexagon repairs structural cracks by excavating to the outer shell face where necessary, applying fiberglass laminate to restore structural integrity, and finishing with a color-matched gel coat. The root cause — substrate load, root pressure, or drainage — is documented and addressed as part of the repair scope.

✓ Hill Country substrate drainage + mature root load confirmed as root cause
✓ Laminate repair restores structural shell integrity on Lakeway's Hill Country pool formats
✓ Color-matched gel coat — invisible under water
✓ Up to 5-year warranty on all structural crack repairs

Lakeway Common

Skimmer Repair & Replacement

Skimmer failure is one of the most common repair calls on Lakeway pools — and one of the most consequential if ignored. The skimmer housing is bonded to the pool shell at the waterline, a location that experiences the highest concentration of thermal cycling, LMUD mineral deposit buildup, and UV exposure. Cracks at the skimmer neck or housing allow water to bypass the skimmer seal and migrate behind the shell, creating sustained hydrostatic pressure. Hexagon repairs cracked skimmer housings, replaces failed skimmer bodies, reseals skimmer-to-shell bonds, and installs upgraded skimmer units where the original fitting is beyond repair.

✓ Cracked skimmer neck repaired or housing replaced
✓ Skimmer-to-shell bond resealed — LMUD mineral buildup and root pressure are primary drivers
✓ Upgraded skimmer units specified for Lakeway's Hill Country pool volumes
✓ Repair prevents hydrostatic pressure from Hill Country substrate seasonal drainage patterns

Water Loss Related

Fitting & Return Line Leak Repair

Return fittings, main drain covers, light housings, and spa jets are all penetration points in the fiberglass shell — and each is a potential leak source as sealants age and ground movement applies shear force to bonded fittings. Unexplained water loss on a Lakeway pool is typically traced to one or more fitting penetrations before a shell crack is confirmed. Hexagon performs a systematic pressure test and dye test to locate all active leaks, then repairs or replaces the affected fittings and reseals the shell penetration to current standards.

✓ Systematic pressure and dye test — all penetration points tested, not just the visible ones
✓ Resort pools with spas, infinity edges, and water features have 3–5× more fitting penetrations than standard pools
✓ All shell penetrations resealed to current standards — not re-caulked over failed original sealant
✓ Water loss confirmed resolved before pool is returned to service

Ground & Root Pressure

Step, Bench & Ledge Repair

Steps, benches, tanning ledges, and spa walls are the structural elements most vulnerable to delamination and cracking on Lakeway pools. Mature root systems on Hill Country lots exert upward and lateral pressure on horizontal surfaces — steps and ledges — causing separation between the fiberglass laminate layers. Pools with tanning ledges, infinity shelves, and integrated spas have significantly more horizontal surface area exposed to ground pressure than standard pools. Hexagon repairs delaminated steps and ledges by re-bonding the separated layers, applying structural reinforcement where needed, and finishing with a color-matched gel coat.

✓ Tanning ledges and spa walls on Lakeway resort pools have 2–4× the horizontal surface area of standard steps
✓ Mature root pressure on Hill Country lots documented and addressed — not just repaired over
✓ Structural fiberglass laminate reinforcement applied where root load has compromised the bond
✓ Spa, step, ledge, and tanning ledge surfaces color-unified — invisible repair on Lake Travis-finish pools

Repair or Replace? Hexagon's Honest Assessment

Not every repair is worth making — and not every damaged pool needs replacing. Hexagon provides an honest structural assessment of every pool before quoting, with a clear recommendation based on what actually makes financial sense for the property.

When Repair Is the Right Call

Isolated structural cracks with no shell delamination, single skimmer failure, fitting leaks on an otherwise sound shell, and step or ledge repairs on a pool with a good underlying structure are all strong repair candidates. A targeted repair on a sound fiberglass shell typically extends pool life by 10–15 years at a fraction of resurfacing cost.

When Resurfacing Makes More Sense

When a pool has multiple simultaneous failure types — cracks, blistering, oxidation, and fitting leaks together — the cumulative repair cost often approaches resurfacing cost. In those cases, Hexagon recommends resurfacing over piecemeal repair: one fixed price, one process, a new surface, and a full warranty rather than multiple partial warranties on individual repairs.

When the Shell Needs Replacing

Severe shell delamination, hydrostatic uplift (the pool shell has floated), or widespread structural failure from sustained root intrusion are cases where repair is not viable. Hexagon will tell you directly when this is the situation — and provide a full replacement or conversion quote rather than charge for repairs that will not hold.

What to Expect: The Pool Repair Process

Most pool repair projects in Lakeway complete in 3–5 days. Structural repairs involving excavation or skimmer replacement may extend to 7 days. No heavy equipment on your lawn — all work performed from pool deck level.

Day 1

Diagnosis & Drain

Root-cause assessment of all damage — pressure test, dye test, visual inspection dry and wet. Repair scope confirmed. Pool drained and surface dried before structural work begins.

Days 2–3

Structural Work

Crack repair, skimmer replacement, fitting resealing, or laminate reinforcement completed at shell level. All structural work inspected and approved before gel coat phase begins.

Days 3–4

Gel Coat Finishing

Color-matched gel coat applied over all repair areas. Blended edge-to-edge for an invisible finish. Skimmer surrounds and fitting flanges refinished to match surrounding surface.

Days 4–5

Refill & Warranty

Pool refilled and water chemistry balanced. All repair work documented. Warranty issued — up to 5 years on structural repairs. Final walkthrough confirms every issue resolved.

Lakeway Pool Repair — Root Cause First, Every Time

Hexagon assesses your Lakeway pool, identifies every repair need, and gives you an honest recommendation — repair, resurface, or replace. Fixed-price quote, root-cause diagnosis, work that holds through the next Hill Country season.

Get Your Free Pool Repair Assessment

Why Lakeway Pools Benefit from Fiberglass

The Standard Your Investment Deserves

Lakeway's Hill Country properties, LMUD hard water, demanding HOA communities, and extended Central Texas swim season create conditions where fiberglass isn't just better — it's the only responsible choice for a Lake Travis pool investment.

LMUD Hard Water

Lake Travis Hard Water & LMUD Chemistry

Lakeway is served by LMUD drawing from Lake Travis — water at 150–200 mg/L hardness that etches plaster and deposits calcium on porous surfaces continuously. Combined with the long March–November swim season, surface degradation accelerates faster than in softer-water markets.

✓LMUD hard water etches plaster from day one
✓Calcium deposits roughen aggregate finishes within 8–10 years
✓Fiberglass is non-porous — no scale adhesion or etching
✓Up to 45% chemical reduction with fiberglass surface

Pool Scale

Resort-Style Pools, Higher Stakes

Lakeway pools are resort-style investments — typically 700–1,000 sq ft with integrated spas, infinity edges, tanning ledges, and water features built for the Lake Travis setting. More surface area and configuration complexity means higher maintenance costs, more chemistry to manage, and more to lose when a surface fails.

✓Fiberglass applied to every contour — spa, steps, ledges
✓Chemical savings are proportionally greater on larger pools
✓One surface failure on a complex pool is costly to fix right
✓Fiberglass eliminates the risk — permanently

Central Texas Heat

9-Month Season & Intense UV Exposure

Lakeway's Central Texas swim season runs March through November — nine months of sustained UV exposure and thermal cycling. Combined with summer heat indexes above 105°F, surfaces face more cumulative UV and chemical load than in shorter-season markets.

✓UV oxidizes and fades plaster and marcite over the long season
✓Fiberglass gel coat contains UV inhibitors — resists fading
✓Thermal cycling cracks rigid surfaces over Central Texas winters
✓Fiberglass flexes with temperature extremes — no cracking

HOA Standards

Meeting Lakeway's Exacting Standards

Lakeway's HOA communities — Rough Hollow, The Hills of Lakeway, Serene Hills, Tessera, and others — have architectural committees that review and approve exterior improvements. Fiberglass installations require City of Lakeway Development Services permits and, in some communities, committee documentation.

✓Full architectural review documentation provided
✓City of Lakeway Development Services permits coordinated directly by Hexagon
✓Premium color options match Lake Travis property exterior finishes
✓Non-disruptive installation — no demolition, no heavy equipment

Result: For Lakeway pools, fiberglass isn't a premium upgrade — it's the baseline standard that LMUD hard water, resort-scale pools, and Lake Travis community expectations demand.

7–10 Day Process

Our Lakeway Fiberglass Process

From Drain to Swim in Under 2 Weeks

Both HEXConvert™ and Fibre Tech™ follow the same 5-phase installation. No demolition. No disruption to your outdoor living space.

01

Day 1

Assessment & Drain

— Technician confirms system selection
— Pool drain coordinated on-site
— Landscaping and hardscape protection plan agreed
— HEXConvert™ or Fibre Tech™ confirmed

02

Days 2–3

Surface Preparation

— Existing surface cleaned, etched, and profiled
— Substrate drainage and root-driven structural cracks resolved
— Equipment access routes protect landscaping throughout

03

Days 4–6

System Application

— Applied in multiple layers by certified technicians
— Hand-crafted to every contour — pool, spa, steps, ledges
— Quality checkpoints throughout

04

Days 7–8

Cure & Inspection

— Cures under controlled conditions
— Central Texas Hill Country heat accelerates the cure phase
— Full quality inspection before refill authorized

05

Days 9–10

Refill & Warranty

— Pool refilled, water chemistry balanced
— HOA documentation and warranty paperwork delivered
— HEXConvert™: 10-yr comprehensive — starts day one
— Fibre Tech™: 25-yr material — transfers with the property

No demolition required · Landscaping protected throughout · HOA documentation provided at completion

Schedule Your Assessment

Why Hexagon

Why Lakeway Chooses Hexagon

Fiberglass specialists — meeting Lakeway's standard

01

Lakeway Permitting Expertise

✓ Experienced with Rough Hollow, The Hills of Lakeway & Serene Hills HOAs
✓ Full architectural review documentation provided
✓ City of Lakeway Development Services permit coordination included

02

Full-Scale Capability

✓ Equipped for pools 700 sq ft and above
✓ Spa, infinity edge, and tanning ledge expertise
✓ Landscaping and hardscape protection protocol

03

Industry Recognition

✓ Texas Pool & Spa Association certified
✓ Certified Pool Operators on every project
✓ $2M liability insurance

04

Exclusive Technology

✓ HEXConvert™ proprietary to Hexagon
✓ Exclusive Fibre Tech™ materials
✓ Methods developed over 3 decades
✓ Factory direct quality assurance

Our Lakeway Service Area

Serving all of Lakeway and surrounding Lake Travis corridor communities within a 30-mile radius

972-789-2983

Click to call

Lakeway Communities We Serve

Trusted by homeowners in Lakeway's most exclusive neighborhoods

Waterfront / Resort

Rough Hollow & Waterfront

Rough Hollow Lake Travis Lakeside Waterside Lakeway Cove

Specialty Waterfront and resort-style pool expertise with Lake Travis exposure considerations

Challenge LMUD mineral hardness at waterline elevation, lake-adjacent UV intensity, infinity edge maintenance

Gated / Master-Planned

The Hills of Lakeway

The Hills of Lakeway Lakeway Highlands Lakeway Commons Twin Creeks

Specialty Gated community experience with full HOA documentation and City of Lakeway permit coordination

Challenge HOA architectural review, premium aesthetic standards, City of Lakeway Development Services requirements

New Development

Serene Hills & Tessera

Serene Hills Tessera Highland Lake Estates Crystal Falls

Specialty Newer construction expertise with LMUD hard water damage accumulating on 10–15 year old pools

Challenge First replaster cycle approaching on 2010s-era pools — convert before the cycle begins

Established / Historic

Old Lakeway & Lohmans

Old Lakeway Lohmans Crossing Lake Travis Heights The Landing

Specialty Established neighborhood expertise with 1990s–2000s plaster and aggregate configurations

Challenge Hill Country caliche drainage challenges and aging plaster on sloped limestone lots

Full Coverage

Every Lakeway address covered

Every Lakeway neighborhood — waterfront or inland, established or newer development — receives the same quality standards, materials, and warranty protection. HOA documentation is provided for every job, regardless of community.

Confirm Your Coverage

Lakeway Success Stories

Real Results from Your Neighbors

Rough Hollow

"Lake view restored — surface finally matches the setting"

"We bought in Rough Hollow specifically for the outdoor living. The pool looks directly toward Lake Travis and guests notice it immediately. After 14 years the plaster was rough, stained, and embarrassing against that view. Hexagon's crew worked around our lakeside landscaping carefully, submitted the HOA paperwork themselves, and delivered a surface that finally looks like it belongs here."

— Gregory & Sandra Whitfield, Rough Hollow

Pool with infinity shelf · Fibre Tech™ 25-yr warranty · Investment: $24,800

The Hills of Lakeway

"HOA submission handled — approved first review"

"The Hills has an architectural committee with specific finish standards. I expected the approval process to be the hard part. Hexagon handled the entire submission — color samples, material specs, documentation package. Approved first review. The install itself took nine days and the crew left the property exactly as they found it."

— Jonathan & Karen Hartwell, The Hills of Lakeway

Pool Age: 16 years · HEXConvert™ 10-yr warranty · Investment: $21,400

Serene Hills

"LMUD water damage caught early — converted before the second cycle"

"Our pool was 12 years old and showing the white calcium haze we had seen on neighbor pools. Our contractor quoted replastering. Hexagon's assessment showed the plaster was not just stained — it was being etched by the LMUD water chemistry from Lake Travis. Converting now instead of replastering saved us from starting a cycle we would repeat every 7 years. The decision was straightforward once they explained it."

— Michael & Renee Stafford, Serene Hills

Pool Age: 12 years · Fibre Tech™ 25-yr warranty · Investment: $20,200

Old Lakeway

"30-year-old pool — looks better than when it was new"

"This pool was here when we bought the property in 1998. Original plaster, resurfaced twice. The third replaster quote was $16,500. Hexagon quoted conversion at slightly more and explained that the third replaster would be followed by a fourth in seven years. The math was straightforward. The result is extraordinary — a pool that looks and performs like a new installation on a lot that has been lived in for 30 years."

— Thomas & Linda Beaumont, Old Lakeway

Fibre Tech™ warranty transferred at closing · Investment: $23,100

20-Year Cost Comparison

Investment & Savings Analysis

Lakeway pool ownership costs over 20 years

Traditional Path

Resurfacing Cycle · 20 Years

Item	Annual	20-Year
Replastering (every 7 yrs, LMUD water)	$2,200	$44,000
Chemical premium (hard LMUD water)	$1,100	$22,000
Acid washing & mineral descaling	$600	$12,000
Hill Country substrate drainage maintenance	$800	$16,000
Water replacement & refills	$500	$10,000
Total Traditional Path	—	$104,000

Hexagon Fiberglass Path

One Conversion · 20 Years

Item	One-Time / Annual	20-Year
Initial conversion	$22,500	$22,500
Maintenance (reduced)	$300/yr	$6,000
Chemicals (up to 45% less)	$600/yr	$12,000
Repairs (within warranty)*	$0	$0
Total Hexagon Path	—	$40,500

* HEXConvert™ covers labor & materials for years 1–10. Fibre Tech™ material warranty covers years 1–25. Post-warranty repair costs will vary.

Potential Lakeway Savings

$63,500

based on a typical $22,500 conversion · Transferable warranty protects your Lakeway Lake Travis real estate investment

Results will vary based on pool size, usage, and local market conditions. Property value estimates are illustrative only. Consult a licensed real estate professional for advice specific to your property.

60–80%

Returns at resale

18–25%

Fewer days on market

$20k–$50k

Higher sale price

Transferable

Warranty included

Calculate Your Pool Savings

FAQs

Lakeway Pool Questions

LIMITED TIME
Lakeway Fiberglass Special

Save $1,500 on Your Pool Conversion

Book your Lakeway fiberglass assessment before June 1, 2026:

$1,500 OFF any conversion over $15,000

Complimentary pool assessment ($500 value)

0% Financing for 18 months (qualified buyers)

HOA Documentation package included at no charge

Exclusive to Lakeway fiberglass projects. Limited appointments available.

Start Your Pool Transformation — 972-789-2983

Lakeway Fiberglass PoolRepair & Resurfacing7-10 Day Install

10 or 25 Yr

7-10 Days

HOA Ready

Get Your Complimentary Lakeway Quote

Lakeway Pool Services

Fiberglass Pool Resurfacing

Fiberglass Pool Conversion

Re-Gelcoat Restoration

Fiberglass Pool Repair

Why Lakeway Pools Benefit from Fiberglass

Lake Travis Hard Water & LMUD Chemistry

Resort-Style Pools, Higher Stakes

9-Month Season & Intense UV Exposure

Meeting Lakeway's Exacting Standards

Our Lakeway Fiberglass Process

Assessment & Drain

Surface Preparation

System Application

Cure & Inspection

Refill & Warranty

Why Lakeway Chooses Hexagon

Lakeway Permitting Expertise

Full-Scale Capability

Industry Recognition

Exclusive Technology

Our Lakeway Service Area

Lakeway Communities We Serve

Rough Hollow & Waterfront

The Hills of Lakeway

Serene Hills & Tessera

Old Lakeway & Lohmans

Every Lakeway address covered

Lakeway Success Stories

Investment & Savings Analysis

Lakeway Pool Questions

Save $1,500 on Your Pool Conversion

Your Home Deserves a Pool Surface That Matches It

Lakeway Fiberglass Pool
Repair & Resurfacing
7-10 Day Install