Lubbock Fiberglass Pool Repair & Resurfacing 7-10 Day Install

Yes — we serve Lubbock and the surrounding South Plains, from Tech Terrace, Lakeridge, and Vintage Township to Wolfforth, Shallowater, Ransom Canyon, and beyond. Call us at 972-789-2983 to confirm coverage for your specific address; same-week assessments are available.

Four West Texas forces combine: very hard Ogallala-influenced water that scales and stains porous plaster; near-surface caliche and clay-loam that move seasonally and crack rigid shells; intense high-elevation UV that fades and chalks finishes; and hard winter freezes that stress every rigid surface. Fiberglass is non-porous, UV-stabilized, and flexible — which is why it outlasts traditional surfaces here.

A professionally installed fiberglass surface lasts for decades — far longer than the 5–7 years plaster gives you on the South Plains. HEXConvert™ carries a 10-year comprehensive warranty and Fibre Tech™ a 25-year transferable material warranty, and both routinely outlast those terms with normal care. You end the replaster cycle instead of repeating it.

Lubbock's Ogallala-influenced supply is among the hardest in Texas, depositing scale and staining porous plaster quickly. Both HEXConvert™ and Fibre Tech™ fiberglass surfaces are non-porous, so minerals can't penetrate — no scale buildup, far less staining, and no acid-washing cycle. We also balance your startup chemistry for local hard-water conditions.

Yes — that's a key advantage here. Near-surface caliche hardpan over Amarillo and Pullman clay-loam creates uneven support and seasonal movement that cracks rigid plaster and gunite. A fiberglass surface flexes with that movement instead of fracturing, and we resolve drainage and any structural cracks during prep so the result is permanent.

Yes — better than any traditional surface. At about 3,200 feet, Lubbock gets sustained, intense UV that fades and chalks plaster and exposed aggregate. Both our systems carry UV inhibitors in the gel coat that hold color and gloss for decades, so your pool keeps looking new through the long, sunny season.

Fiberglass handles freeze-thaw far better than rigid plaster and gunite. As temperatures swing from hot summers to hard winter freezes, rigid surfaces expand, contract, and crack; a flexible fiberglass shell moves with that cycle. Freeze damage is one of the most common West Texas repair calls, and conversion is the permanent fix.

Wind-blown grit and hail are tough on a pool. A non-porous fiberglass surface is smooth and dense, so blown dust doesn't embed and abrade it the way it does porous plaster, and it cleans easily. We can also assess and repair any storm or hail damage to the surface, fittings, and equipment.

Yes. We repair gel-coat fading and oxidation, spider cracks, osmotic blisters, and structural cracks on fiberglass pools — color-matched so the repair is invisible under water. Most repairs finish in 3–5 days, and we diagnose the root cause (caliche movement, hard water, or UV) so the fix lasts.

It depends on the damage: minor gel-coat touch-ups start around $800–$1,500, larger restorations run $3,000–$8,000, and complete refinishing $8,000–$15,000. You get a firm, itemized quote at the free assessment — and catching damage early is always cheaper than waiting for it to spread.

Yes — conversion is often the best solution for aging pools with cracks, scaling, or surface deterioration. Our systems bond directly to your existing concrete or gunite structure, bridge minor cracks, and add structural reinforcement. We've converted pools decades old; at the free assessment we'll confirm the right approach for yours.

Yes. From Lakeridge and Kings Gate to Vintage Township, we provide the documentation HOAs request, and our finishes meet or exceed neighborhood standards. Most HOAs approve our fiberglass work readily once they've seen the results nearby.

Usually, yes. Your pump, filter, and heater typically work fine with a converted pool, and fiberglass's smooth surface can let equipment run easier. We assess your system at the Lubbock consultation and only recommend an upgrade — like a variable-speed pump — when it will genuinely save you money.

Absolutely — fiberglass is ideal for saltwater pools. Unlike plaster and concrete that salt degrades over time, our non-porous fiberglass surface is completely salt-resistant and won't pit or break down. Many Lubbock homeowners keep or upgrade to a saltwater system during conversion for the lowest-maintenance result.

Our fiberglass systems offer a range of fade-resistant colors with a UV-stabilized gel coat that holds its appearance for decades — important under Lubbock's intense sun. White and light blue are our standard finishes; other premium colors are available at an upcharge. We'll show you samples and help you choose at the consultation.

Most Lubbock conversions take 7–10 days: drain, surface preparation and crack repair, multi-layer fiberglass application, a controlled cure, then refill and hard-water chemistry balancing. We schedule around hard freezes, keep a clean worksite, protect your landscaping, and provide HOA documentation where needed.

It can. A smooth, modern, warrantied surface shows well to buyers, and the Fibre Tech™ 25-year warranty is transferable — a documented asset that follows the home. In Lubbock's market, a low-maintenance pool with warranty paperwork is a genuine selling point versus a pool due for another replaster.

We serve Lubbock and all of Texas, with crews experienced in Ogallala hard water, caliche soils, and West Texas freeze conditions. Call 972-789-2983 to confirm scheduling for your address — the assessment is always free, and veterans receive a 5% discount applied at booking.

HEXConvert™ Resurfacing is our proprietary fiberglass resurfacing system. We bond a multi-layer fiberglass-and-gelcoat surface over your existing concrete, gunite, or plaster shell to create one continuous, non-porous, factory-smooth finish. Unlike plaster — which has to be redone every 7–10 years — a HEXConvert™ surface is a one-time installation backed by a 10- or 25-year warranty.

Re-Gel is the gelcoat-renewal stage of the HEXConvert™ system. We apply a fresh, color-matched gelcoat over the fiberglass to restore the smooth, glossy finish and protect it against UV, pool chemicals, and everyday wear — bringing an existing fiberglass surface back to like-new condition without a full rebuild.

Fiberglass lasts 25+ years vs 7-10 for plaster, reduces chemical usage by 75%, prevents algae growth, and never needs acid washing.

Our 25-year warranty covers the fiberglass shell against structural defects, delamination, blistering, and fading. It's transferable to future homeowners.

Both deliver the same smooth, permanent fiberglass surface — the difference is the warranty. HEXConvert™ is our proprietary system with a 10-year comprehensive (labor and materials) warranty and the fastest install. Fibre Tech™ carries a 25-year transferable material warranty, ideal if you may sell since it follows the home. We'll help you choose at the consultation.

Yes! Pool conversion works excellently for old or damaged pools. In fact, conversion is often the best solution for aging pools with cracks, surface deterioration, or structural issues. Our Fibre Tech™ system bonds directly to your existing concrete/gunite structure and can bridge minor cracks while providing structural reinforcement. We've successfully converted pools that are 30+ years old. During your free consultation, we'll assess your pool's condition and recommend the best approach for your specific situation.

Yes! Our Fibre Tech™ technology is custom-molded to fit any pool shape and size, from standard rectangles to custom freeform designs.

Your pool will look better! You can choose from various colors and the smooth gel-coat surface is more attractive than weathered plaster.

Absolutely! Fiberglass is completely salt-resistant, unlike concrete which can deteriorate from salt exposure.

Usually no. Most existing equipment works perfectly with fiberglass. We'll assess during consultation and recommend upgrades only if beneficial.