Fiberglass Pool Repair & Resurfacing Waco

Waco Pool Services

Complete fiberglass solutions for every pool type

Fiberglass Pool Resurfacing

McLennan County sits at the geographic center of the Texas Blackland Prairie — the most expansive clay soil formation in the state. When the Brazos River basin floods in spring and contracts in summer drought, the clay beneath Waco pools moves more than in any DFW suburb Hexagon services. WWU hard water at 120–160 mg/L compounds the surface damage, but the ground itself is the primary failure driver. Replastering manages the visible symptom every 5 to 7 years. Fiberglass addresses the root cause permanently.

Homeowners choosing fiberglass pool resurfacing in Waco with fiberglass put an end to the replaster cycle for good.

Permanent surface vs. recurring $7,000–$11,000 replastering
Glass-smooth — never rough, stained, or scaled again
Up to 45% reduction in chemical usage
Algae-resistant non-porous surface
Choice of 10-yr or 25-yr transferable warranty

7-10 Day Install 10 or 25-Yr Warranty HOA Documentation Included

Learn About Waco Resurfacing

Fiberglass Pool Resurfacing in Waco — before and after

What Is Pool Resurfacing — and Why Does Your Waco Pool Need It?

Pool resurfacing is the process of removing or overcoating your pool's existing interior finish and applying a new, durable surface layer directly to the shell. Every pool surface degrades over time — plaster chalks and stains, marcite roughens and scales, vinyl liners fade and tear. In Waco, that degradation is accelerated by three compounding factors: Blackland Prairie clay soil that swells and contracts with every rain-drought cycle, WWU-supplied hard water (120–160 mg/L) that deposits calcium scale on porous surfaces, and a long, intense April–October pool season that subjects surfaces to sustained UV exposure and thermal cycling.

Left unaddressed, a failing pool surface becomes progressively more expensive. A rough plaster finish abrades swimmers and holds algae; stained or etched surfaces require repeated acid washing that removes surface material and shortens the replacement cycle; cracks and delamination allow water migration behind the shell, which — on a clay soil site — can cause hydrostatic pressure that damages the shell itself. Resurfacing before the surface reaches failure is always less expensive than remediation after it.

Signs Your Waco Pool Needs Resurfacing

Rough or sandpaper texture on pool floor and walls
Persistent staining that acid washing no longer removes
Visible cracks, chips, or delaminating patches
Chalky white calcium deposits or efflorescence
Recurring algae despite correct chemical balance
Fading, discoloration, or uneven finish color
Unexplained water loss (surface micro-leaks)
Surface age over 7 years on plaster or marcite

Pool Resurfacing Services in Waco, TX

Hexagon resurfaces every pool type found in Waco — from aging plaster gunite pools in Sanger Heights and Hillcrest to vinyl-liner pools in Woodway and Bellmead. All paths lead to the same outcome: a permanent fiberglass surface engineered for Central Texas conditions.

Most Common

Plaster & Marcite Pool Resurfacing

Waco's Blackland Prairie clay does not move gently. Brazos River basin flooding in wet seasons saturates the clay fully; summer drought then contracts it with enough force to fracture rigid gunite shells on a schedule that Waco homeowners recognize but cannot plan around. The plaster surface cracks because the shell beneath it moves. WWU's 120–160 mg/L water then infiltrates every fracture and accelerates dissolution from the inside. Hexagon strips the failed surface, repairs all ground-movement structural cracking in the gunite shell — not just the cosmetic surface — and installs fiberglass that flexes with clay movement rather than cracking against it.

Replastering eliminated — not deferred, not rescheduled
Blackland Prairie clay-driven structural crack repair included in preparation
Fiberglass bonds directly to Waco's standard residential gunite shells
Glass-smooth finish permanent in WWU hard water conditions

Growing Demand

Pebble & Aggregate Finish Resurfacing

Aggregate finishes popular on Waco pools built in the mid-1990s and 2000s face a combined failure mechanism unique to McLennan County: WWU mineral scale packs the aggregate texture from above while Blackland Prairie clay cycling fractures the surface from below. The result is a finish that roughens faster in Waco than the same product installed in still-water environments — and one that is difficult to maintain chemistry on once the surface texture breaks down. The rough patches that develop are not a cleaning problem. They are a geology problem. Fiberglass resurfacing resolves both simultaneously, delivering a smooth surface that neither WWU chemistry nor Brazos basin clay movement can degrade.

Roughness eliminated — permanent foot comfort
Applied over existing aggregate — no decking or landscaping disruption
Glass-smooth finish permanent in WWU hard water conditions
Unified surface across pool, spa, and tanning ledge

Vinyl Liner Pools

Vinyl Liner Pool Resurfacing

Waco's vinyl liner pools carry a replacement cost of $3,500–$6,000 every 7 to 10 years — a recurring line item that, across three replacement cycles, approaches or exceeds what a permanent fiberglass conversion costs outright. For Waco homeowners managing household budgets carefully, this math becomes a financial argument, not just a preference. Blackland Prairie clay movement also puts unusual stress on liner seams and returns — failure modes that a new liner does not prevent because the ground causing them has not changed. Hexagon installs a permanent fiberglass interior over the prepared shell, ending both the replacement cycle and the clay-driven seam stress permanently.

Liner replacement cycle ends permanently
No ongoing $3.5–6k liner costs on Waco residential pools
Permanent non-porous surface — transferable at closing
Handles all Waco pool shapes including spas and tanning ledges

Existing Fiberglass

Fiberglass Pool Re-Resurfacing

Waco's early fiberglass pools — some installed when fiberglass conversion was still a new technology in Central Texas — are now 30 to 40 years old and carrying the combined surface damage of four decades of summer UV, WWU mineral scale, and Brazos basin clay-pressure cycling. The spider cracking on these older shells is not always cosmetic: McLennan County clay movement can convert hairline gel coat fractures into structural stress points over time if left untreated. Hexagon grinds back the deteriorated surface, conducts a full structural assessment of the shell, repairs all blistering and clay-pressure cracking, and applies a fresh system that carries a new warranty from day one — giving Waco's oldest fiberglass pools a clean structural and cosmetic slate.

Restores surfaces dulled by Blackland Prairie clay movement and WWU mineral buildup
Blisters and clay-pressure spider cracks repaired before application
Full warranty — transferable at point of sale
15–20 year life extension on Waco's aging fiberglass pool stock

Why Fiberglass Resurfacing — Not Replaster, Pebble Tec, or Epoxy Paint

Waco homeowners are typically presented with four resurfacing options. Here is an honest comparison of how each performs in Central Texas conditions over a 20-year ownership horizon.

Surface Type	Lifespan	20-Yr Cost	Hard Water	Clay Soil
White Plaster	5–7 yrs	$60k–$114k	Scales heavily	Cracks with movement
Marcite	6–8 yrs	$54k–$96k	Stains & scales	Cracks with movement
Pebble / Aggregate	8–12 yrs	$45k–$72k	Roughens quickly	Cracks with movement
Epoxy Paint	2–4 yrs	$70k–$100k+	Peels & blisters	Delamination risk
✓ HEXConvert™ / Fibre Tech™ Fiberglass	20–30 yrs	$14k–$22k	Non-porous — no scale	Flexes — no cracking

* 20-year cost estimates based on Waco pool averages (400–550 sq ft). Includes material, labor, and chemistry costs per cycle.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Waco homeowners who have been absorbing the replastering cost every 5 to 7 years and are ready to redirect that recurring $7,000–$11,000 into their household budget permanently. At $44,500 in projected 20-year savings, HEXConvert™ pays for itself within a single ownership horizon — and that math only improves with Waco's clay-driven maintenance costs on top of the surface cycle.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Waco homeowners who want to list their property with a pool that works in their favor rather than triggering buyer inspection concerns. A Fibre Tech™ 25-year transferable warranty tells a buyer that this pool's ground-movement and hard-water problems have been resolved permanently — a claim that plaster pools in McLennan County cannot make.

Your Waco Pool Deserves a Permanent Surface

Hexagon assesses your Waco pool, confirms the right system for your soil conditions, and gives you a fixed-price quote — no surprises, no upsells, no replaster in 5 years.

Get Your Free Waco Resurfacing Assessment

Save $20k–$40k lifetime

Fiberglass Pool Conversion

In McLennan County, pool conversion is not just a surface upgrade — it is a structural solution to a geology problem. Waco's Blackland Prairie clay will continue cycling under any pool shell, regardless of what the surface is made of. Fiberglass absorbs and distributes that movement rather than fracturing under it. Hexagon converts gunite, vinyl liner, concrete, and aging fiberglass pools without excavation, without disrupting decking, landscaping, or outdoor living space — and without leaving the underlying ground-movement problem unaddressed.

Vinyl liner → fiberglass — eliminates $5–8k annual liner replacement costs
Gunite → fiberglass — permanently ends clay-driven structural cracking
Concrete → fiberglass — stops the North Texas maintenance cycle
Fiberglass restoration — modern surface, extended life, transferable warranty

HEXConvert™ 10-yr Fibre Tech™ 25-yr

Explore Waco Conversion

Fiberglass Pool Conversion in Waco — before and after

What Is a Fiberglass Pool Conversion — and Is It the Right Choice for Your Waco Pool?

A fiberglass pool conversion is a complete interior system change — transforming your existing pool from its current surface technology (vinyl liner, plaster, gunite, concrete) to a permanent, non-porous fiberglass shell. Unlike resurfacing, which preps and overcoats a surface that still has usable structure, conversion is the appropriate choice when the underlying system itself has reached the end of its viable life: when a vinyl liner pool has had two or more liner replacements, when a gunite shell has sustained repeated structural cracking from Waco's Blackland Prairie clay movement, or when the cost of continued maintenance now rivals the cost of a one-time permanent solution.

Critically, Hexagon performs fiberglass pool conversions without excavation and without disruption to your existing decking, landscaping, or outdoor living infrastructure. For Waco properties — where mature trees and established landscaping make any ground disturbance costly and disruptive — this is the deciding factor. The entire conversion is completed from inside the pool in 7–10 days, with zero contact with surrounding property.

You're a Conversion Candidate If…

Your vinyl liner has been replaced once or more already
Your gunite or concrete pool cracks recur after every repair
Annual maintenance costs exceed $3,000 with no improvement
Your pool surface has multiple simultaneous failure types
You're planning a renovation and want a permanent solution
Your pool is 15+ years old and has never had a system upgrade
You want to eliminate all future resurfacing from your budget
You're preparing the property for sale and want a warranty asset

Fiberglass Pool Conversion by Pool Type

Hexagon converts every pool type found in Waco. The conversion method is tailored to the existing shell structure — but the outcome is always the same: a permanent, low-maintenance fiberglass interior with full warranty coverage.

Most Requested

Gunite & Shotcrete Pool Conversion

Gunite and shotcrete pools are the most common pool type in Waco's established neighborhoods — Sanger Heights, Hillcrest, Woodway, and across McLennan County. Over time, Waco's Blackland Prairie clay causes the gunite shell to develop structural cracks that return after every repair. Fiberglass conversion permanently ends this cycle by applying a flexible, non-porous surface that accommodates the seasonal soil movement that makes rigid concrete crack.

Blackland Prairie clay load confirmed and documented — not just noted as a risk
Tree root intrusion assessed and addressed before application
Pool, spa, and tanning ledge fully unified under one fiberglass surface
Full warranty — transferable at closing for McLennan County resale

Highest ROI

Vinyl Liner Pool Conversion

Vinyl liner pools in Waco carry a $3,500–$6,000 replacement cost every 7–10 years — and WWU hard water shortens that cycle by accelerating calcium buildup and oxidation at the waterline. A fiberglass conversion eliminates the entire liner cycle: no replacement costs, no seasonal wrinkling, no liner tearing at fittings or edges. Hexagon converts the existing shell to permanent fiberglass — a permanent, transferable improvement.

Liner replacement cycle ends permanently — no WWU hard water liner deterioration
Fiberglass handles every Waco pool configuration — spa, tanning ledge, water feature inlets
Permanent non-porous surface — transferable at closing
Payback period 10–12 years through eliminated liner costs plus reduced chemical spend

Full System Upgrade

Concrete Block Pool Conversion

Older concrete block pool shells — found across Waco in pools built in the 1970s and 1980s — are particularly vulnerable to mortar degradation and water infiltration in Blackland Prairie clay environments. Hexagon waterproofs and stabilizes the block structure before applying fiberglass, creating a sealed, unified interior surface that stops water migration and restores the pool to full structural integrity.

Block structure assessed and stabilized — root intrusion and clay pressure documented
Mortar joints sealed against WWU hard water infiltration
Water migration behind shell permanently stopped
Preserves Waco landscaping and decking — zero excavation

Premium Upgrade

Fiberglass-to-Fiberglass Conversion

An existing fiberglass pool with a failing original surface — osmotic blistering, deep spider cracks, severe oxidation, or delamination — is a strong fiberglass conversion candidate. Rather than attempting a patch-and-repair cycle on a compromised gel coat, Hexagon removes the failed surface layer, inspects and repairs the structural shell, and applies a fresh HEXConvert™ or Fibre Tech™ system. The result is a pool that performs identically to a new fiberglass installation, with full warranty coverage.

Failed gel coat fully removed — root pressure and WWU scale evaluated pre-application
Shell structural inspection confirms Blackland Prairie clay-stressed shell integrity
Full Fibre Tech™ or HEXConvert™ warranty — transferable at closing
Preferred over repeated patch repairs on Waco's aging fiberglass pool stock

Why Waco Homeowners Choose Conversion Over Continued Maintenance

The financial case for conversion is straightforward when you compare the cumulative cost of maintaining a traditional surface against the one-time cost of a permanent fiberglass system.

No Excavation. No Disruption.

The entire conversion is performed from inside the pool. No digging, no equipment on your lawn, no damage to decking, irrigation, or landscaping. For Waco properties with established trees and landscaping, this is non-negotiable. Hexagon has never required ground disturbance for a conversion project.

The 20-Year Financial Case

A Waco pool on a traditional plaster or vinyl liner cycle costs $40,000–$70,000 over 20 years in surface maintenance alone. A one-time fiberglass conversion costs $10,000–$15,000 and requires no further surface work within the warranty period. The delta — $30,000–$55,000 — is the conversion's return on investment over a 20-year horizon.

HOA-Ready Documentation

Waco communities and HOA neighborhoods require documentation for exterior improvements. Hexagon provides full architectural-review packages and completion documentation at no additional charge. Every conversion leaves the property with a documented, warranty-backed improvement on file.

Your Conversion System: HEXConvert™ or Fibre Tech™

Both systems deliver a permanent fiberglass interior. Your choice determines warranty depth and transferability.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest completion — 7-day average
Ideal for long-term owners with no near-term sale plans
White or light blue standard — other colors available at an upcharge

Best for: Waco homeowners maximizing long-term value — one HEXConvert™ conversion replaces decades of plaster, liner, and acid wash cycles on a pool the WWU hard water has been degrading since installation.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — a documented resale asset
Preferred for owners with a 5–10 year sale horizon
White or light blue standard — other colors available at an upcharge

Best for: Waco homeowners planning to sell — the 25-year Fibre Tech™ transferable warranty is a documented listing differentiator that McLennan County buyers and appraisers recognize at closing.

Waco Pools Deserve a Permanent Interior

Hexagon assesses your Waco pool's existing structure, recommends the right system for your soil conditions, and gives you a fixed-price quote. No excavation. No disruption to mature landscaping. Done in 7–10 days.

Get Your Free Conversion Assessment

Existing Fiberglass Pools

Re-Gelcoat Restoration

Already have a fiberglass pool? Waco fiberglass surfaces degrade under conditions that differ meaningfully from the DFW suburbs: a longer Central Texas swim season running April through October, summer heat indexes that regularly exceed 108°F and accelerate thermal cycling in pool water, and WWU hard water continually depositing calcium scale on exposed gel coat. The surface chalking and dullness Waco homeowners observe on older fiberglass pools is a climate and chemistry issue — not evidence that the shell is failing. Re-gelcoating restores the surface to like-new condition without disturbing the shell.

Fraction of the cost of full pool replacement
Color-matched or upgrade to a modern premium finish
Restores UV protection and chemical resistance
Addresses spider cracks and blistering simultaneously
Extends pool life by 15–20 years

3–5 Day Turnaround Color-Matched

Get a Re-Gelcoat Assessment

Full Gel Coat Restoration

Complete color-matched refinish — spa and pool surface unified.

Oxidation & Fade Removal

Restores DFW sun-faded fiberglass to premium original gloss.

Spider Crack Filling

Clay-movement cracks filled and color-matched before gelcoat.

Blister & Delamination Fix

Blisters ground out, base repaired, gelcoat applied over top.

What Is Pool Gel Coat — and Why Do Waco Fiberglass Pools Need Repair?

Gel coat is the outermost layer of a fiberglass pool — a resin-based protective finish that provides the pool's color, gloss, chemical resistance, and UV protection. It is what you see, touch, and swim against. When your fiberglass pool looks faded, feels rough, or shows cracks and blisters, it is the gel coat that has degraded — not the structural fiberglass shell beneath it.

Waco's climate accelerates gel coat degradation faster than national averages. The Central Texas pool season runs April through October — seven months of sustained UV exposure at an index that regularly exceeds 9, combined with August heat indexes above 108°F. WWU-supplied water at 120–160 mg/L hardness deposits calcium on gel coat surfaces, dulling gloss and creating surface roughness that traps algae. Left unaddressed, degraded gel coat exposes the structural laminate beneath it to chemical penetration, which turns a cosmetic issue into a structural one.

Signs Your Waco Pool Needs Gel Coat Repair

Faded, chalky, or dull finish — color no longer vibrant
Spider cracks on pool floor, walls, or around fittings
Osmotic blisters — raised bubbles on the pool surface
Rough or sandpaper texture in previously smooth areas
Visible delamination — gel coat separating from shell
Persistent staining despite correct water chemistry
Patchy color inconsistency across pool and spa surfaces
Pool is 10+ years old and has never had a gel coat service

Pool Gel Coat Repair Services in Waco, TX

Hexagon diagnoses the root cause of every gel coat issue before beginning work — Waco's Blackland Prairie clay, WWU hard water, and UV load each produce distinct failure patterns that require different repair approaches. All work is color-matched to your existing finish or upgraded to a premium modern color.

Most Comprehensive

Full Gel Coat Restoration

When oxidation, fading, and minor surface damage are widespread across the pool, a full gel coat restoration is the most cost-effective approach. Hexagon mechanically prepares the entire surface, addresses all underlying defects, and applies a fresh, UV-stabilized gel coat layer across the pool and spa as a unified refinish. The result is a pool that looks, feels, and performs as it did when first installed — with a color-matched or upgraded finish.

Complete pool, spa, and tanning ledge surface unified under new coat
Mechanically prepared — not chemically stripped
UV inhibitors engineered for Central Texas's intense UV index
Color match or premium upgrade available in 12 options

DFW Most Common

Oxidation & UV Fade Repair

Oxidation is the most common gel coat issue on Waco pools — caused by Central Texas's intense UV breaking down the resin polymers in the gel coat surface. The finish loses its gloss, turns chalky white or gray, and becomes increasingly porous, holding algae and resisting cleaning. WWU calcium deposits accelerate this process by making the surface rougher and more susceptible to algae. Hexagon's oxidation treatment removes the degraded surface layer, restores chemical resistance and UV protection, and brings the original color back to a like-new standard.

Chalky, dull finish restored to original gloss
Porous oxidized layer removed — not polished over
Algae resistance restored — WWU hard water accelerates re-fouling of oxidized surfaces
Effective on all fiberglass pool colors and ages

Clay Soil Related

Spider Crack Repair

Spider cracks in fiberglass gel coat are a direct consequence of ground movement — and Waco's Blackland Prairie clay, which expands and contracts with every rain-drought cycle, produces more ground movement than almost any other soil type in Texas. Spider cracks typically radiate from stress points: fittings, steps, corners, and floor areas above clay expansion zones. Hexagon repairs spider cracks by grinding out each crack to sound material, filling and laminating the substrate, then applying a color-matched gel coat patch that is invisible under water.

Tarrant County clay movement + mature root pressure confirmed as root cause
Each crack ground to sound substrate — not filled over
Structural laminate repaired beneath the gel coat
Color-matched finish — invisible under water on estate pool surfaces

Water Chemistry Related

Osmotic Blister Repair

Osmotic blistering occurs when water molecules penetrate a compromised gel coat and accumulate between the gel coat and the fiberglass laminate, forming raised bubbles on the pool surface. In Waco, hard water chemistry imbalances — particularly low pH combined with WWU's elevated calcium (120–160 mg/L) — accelerate the osmotic process. Hexagon repairs blisters by opening each blister, cleaning the underlying cavity, rebuilding the laminate substrate, and applying gel coat over the repaired area. Water chemistry guidance is provided to prevent recurrence.

Every blister opened, cleaned, and rebuilt — not flattened
Underlying laminate damage addressed before gel coat
WWU hard water chemistry guidance specific to Waco's 120–160 mg/L supply
Prevents escalation to full delamination on pools with integrated spas and tanning ledges

Why Waco Homeowners Should Not Delay Gel Coat Repair

Gel coat issues follow a predictable escalation path. What begins as a cosmetic problem — fading, minor cracking — becomes a structural and financial problem if left unaddressed.

Cosmetic → Structural

Spider cracks that remain unfilled allow water to penetrate to the fiberglass laminate. Once water reaches the laminate in a clay soil environment, hydrostatic pressure cycles cause delamination — separating the gel coat from the shell in sheets. A $400 crack repair becomes a $4,000 delamination job within two to three North Texas seasons.

Neighbor Visibility

Waco's established neighborhoods have active community standards. A visibly faded, cracked, or stained pool surface reflects on the property. Addressing gel coat deterioration proactively avoids escalation from cosmetic to structural — and keeps your outdoor space presentation-ready.

Resale Presentation

In the McLennan County market, pool condition is a material factor in buyer perception and appraisal. A professionally restored gel coat — documented, warranted, and visually clean — positions the pool as an asset rather than a liability in a listing. Buyers ask about pool age and surface condition; a restoration with warranty documentation answers both.

What to Expect: The Gel Coat Repair Process

Most Waco gel coat repair projects complete in 3–5 days. Full restorations on pools with integrated spas typically take 5–7 days. No excavation, no heavy equipment, no disruption to your outdoor living space.

Day 1

Assessment & Drain

Hexagon technician inspects the full pool and spa surface under water and dry conditions. Failure type, extent, and root cause confirmed. Pool drained and surface allowed to dry before work begins.

Days 2–3

Surface Preparation

Defects addressed at substrate level — cracks ground and laminated, blisters opened and rebuilt, oxidized surface mechanically abraded. All preparation work is inspected before gel coat is applied.

Days 3–5

Gel Coat Application

Color-matched or upgraded gel coat applied in controlled layers across all repaired and restoration areas. Spa and pool surface unified under the same finish. Edge-to-edge blending ensures no visible repair lines.

Days 5–7

Cure, Polish & Handover

Gel coat cures under DFW ambient conditions. Surface buffed to premium gloss. Full inspection completed. Water chemistry guidance provided. Warranty documentation issued at handover.

Restore Your Waco Pool to Like-New Condition

Hexagon assesses your fiberglass pool's gel coat, identifies every defect, and provides a fixed-price repair quote. Most jobs complete in 3–5 days — no disruption to your property.

Get Your Free Gel Coat Assessment

3–5 Day Turnaround

Fiberglass Pool Repair

In Waco, most pool damage has a geological explanation. Blackland Prairie clay beneath McLennan County swells and contracts with Brazos River basin wet-dry cycles at amplitudes that are among the highest in Texas. Cracks that look like surface defects are often the visible expression of shell stress caused by ground movement that has been building since the pool was installed. Repairs that fill the crack without addressing the movement pattern fail on the same schedule as the original damage. Hexagon assesses structural causes before any repair work begins.

From the first hairline crack, our fiberglass crack repair stops the spread before it turns structural.

All repairs color-matched to existing finish
Structural repairs address clay and root movement root cause
Most jobs completed in 3–5 days
Up to 5-year warranty on structural repair work

3–5 Day Turnaround Up to 5-Yr Warranty

Schedule a Repair Assessment

Gel Coat Restoration

Color-matched fiberglass refinishing.

Structural Repair

Spider crack elimination.

Osmotic Blister Repair

Comprehensive surface restoration.

Complete Refinishing

Full surface renewal, extended life.

Why Fiberglass Pool Repair in Waco Requires a Different Approach

Fiberglass pool repairs are not interchangeable with plaster or concrete repairs — and Waco's conditions make the distinction critical. The two dominant forces acting on Waco pools are Blackland Prairie clay soil, which expands and contracts with every rain-drought cycle, and WWU hard water calcium deposits, which infiltrate micro-cracks and accelerate delamination. A repair that does not account for these forces will fail again within one to two seasons.

Hexagon's repair process begins with a root-cause assessment, not just a visual surface inspection. We identify whether damage originates from soil movement, root intrusion, water chemistry, or structural fatigue — and address the underlying cause before applying any surface repair. Every repair is color-matched to your existing gel coat and warranted, so the finished result is invisible underwater and backed in writing.

Pool Problems That Need Immediate Attention

Visible cracks on pool floor, walls, or around fittings
Water loss exceeding ¼ inch per day (beyond evaporation)
Skimmer pulling air — cracked housing or broken neck
Return fittings loose, leaking, or showing separation
Step or bench delamination pulling away from shell
Bowing or bulging in pool walls (soil pressure)
Repeated algae bloom despite correct chemistry
Equipment pad flooding — possible shell or plumbing leak

Pool Repair Services in Waco, TX

From hairline gel coat cracks to structural shell repairs and full skimmer replacements, Hexagon handles every repair type found on Waco pools — root-cause first, warranty-backed, color-matched to your finish.

Most Requested — Clay Soil

Structural Crack Repair

Structural cracks in fiberglass pools are the direct result of ground movement — and Waco's Blackland Prairie clay is among the most active in Central Texas. Cracks typically appear on the pool floor above clay expansion zones, around fittings under directional soil pressure, and along walls where clay cycling has stressed the shell. Hexagon repairs structural cracks by applying fiberglass laminate to restore structural integrity and finishing with a color-matched gel coat. The root cause — clay load, root pressure, or drainage — is documented and addressed as part of the repair scope.

Blackland Prairie clay expansion confirmed as root cause — not just patched over
Laminate repair restores structural shell integrity on Waco's standard residential pool formats
Color-matched gel coat — invisible under water
Up to 5-year warranty on all structural crack repairs

Waco Common

Skimmer Repair & Replacement

Skimmer failure is one of the most common repair calls on Waco pools — and one of the most consequential if ignored. The skimmer housing is bonded to the pool shell at the waterline, a location that experiences the highest concentration of thermal cycling, clay movement, and UV exposure. WWU calcium deposits accelerate seal failure at the skimmer neck. Cracks allow water to bypass the seal and migrate behind the shell, where it interacts with Blackland Prairie clay to create sustained hydrostatic pressure. Hexagon repairs cracked skimmer housings, replaces failed skimmer bodies, and reseals skimmer-to-shell bonds.

Cracked skimmer neck repaired or housing replaced
Skimmer-to-shell bond resealed — Blackland Prairie clay movement is a primary driver
Upgraded skimmer units specified for Waco's standard residential pool volumes
Repair prevents hydrostatic pressure from McLennan County clay seasonal expansion

Water Loss Related

Fitting & Return Line Leak Repair

Return fittings, main drain covers, light housings, and spa jets are all penetration points in the fiberglass shell — and each is a potential leak source as sealants age and Blackland Prairie clay movement applies shear force to bonded fittings. Unexplained water loss on a Waco pool is typically traced to one or more fitting penetrations before a shell crack is confirmed. Hexagon performs a systematic pressure test and dye test to locate all active leaks, then repairs or replaces the affected fittings and reseals the shell penetration to current standards.

Systematic pressure and dye test — all penetration points tested, not just the visible ones
WWU hard water calcium buildup accelerates sealant failure around all fitting penetrations
All shell penetrations resealed to current standards — not re-caulked over failed original sealant
Water loss confirmed resolved before pool is returned to service

Root & Soil Pressure

Step, Bench & Ledge Repair

Steps, benches, tanning ledges, and spa walls are the structural elements most vulnerable to delamination and cracking on Waco pools. Blackland Prairie clay cycling and root pressure exert upward and lateral force on horizontal surfaces — steps and ledges — causing separation between the fiberglass laminate layers. WWU hard water infiltrates micro-cracks and accelerates delamination. Hexagon repairs delaminated steps and ledges by re-bonding the separated layers, applying structural reinforcement where needed, and finishing with a color-matched gel coat.

All horizontal surfaces assessed — steps, ledges, benches, and spa walls
Blackland Prairie clay cycling and root pressure documented and addressed — not just repaired over
Structural fiberglass laminate reinforcement applied where clay load has compromised the bond
Spa, step, ledge, and tanning ledge surfaces color-unified — invisible repair

Repair or Replace? Hexagon's Honest Assessment

Not every repair is worth making — and not every damaged pool needs replacing. Hexagon provides an honest structural assessment of every pool before quoting, with a clear recommendation based on what actually makes financial sense for the property.

When Repair Is the Right Call

Isolated structural cracks with no shell delamination, single skimmer failure, fitting leaks on an otherwise sound shell, and step or ledge repairs on a pool with a good underlying structure are all strong repair candidates. A targeted repair on a sound fiberglass shell typically extends pool life by 10–15 years at a fraction of resurfacing cost.

When Resurfacing Makes More Sense

When a pool has multiple simultaneous failure types — cracks, blistering, oxidation, and fitting leaks together — the cumulative repair cost often approaches resurfacing cost. In those cases, Hexagon recommends resurfacing over piecemeal repair: one fixed price, one process, a new surface, and a full warranty rather than multiple partial warranties on individual repairs.

When the Shell Needs Replacing

Severe shell delamination, hydrostatic uplift (the pool shell has floated), or widespread structural failure from sustained root intrusion are cases where repair is not viable. Hexagon will tell you directly when this is the situation — and provide a full replacement or conversion quote rather than charge for repairs that will not hold.

What to Expect: The Pool Repair Process

Most pool repair projects in Waco complete in 3–5 days. Structural repairs involving skimmer replacement may extend to 7 days. No heavy equipment on your lawn — all work performed from pool deck level.

Day 1

Diagnosis & Drain

Root-cause assessment of all damage — pressure test, dye test, visual inspection dry and wet. Repair scope confirmed. Pool drained and surface dried before structural work begins.

Days 2–3

Structural Work

Crack repair, skimmer replacement, fitting resealing, or laminate reinforcement completed at shell level. All structural work inspected and approved before gel coat phase begins.

Days 3–4

Gel Coat Finishing

Color-matched gel coat applied over all repair areas. Blended edge-to-edge for an invisible finish. Skimmer surrounds and fitting flanges refinished to match surrounding surface.

Days 4–5

Refill & Warranty

Pool refilled and water chemistry balanced. All repair work documented. Warranty issued — up to 5 years on structural repairs. Final walkthrough confirms every issue resolved.

Waco Pool Repair — Root Cause First, Every Time

Hexagon assesses your Waco pool, identifies every repair need, and gives you an honest recommendation — repair, resurface, or replace. Fixed-price quote, root-cause diagnosis, work that holds through the next Blackland Prairie clay cycle.

Get Your Free Pool Repair Assessment

Cracks, leaks, bulges, and delamination each need a different fix — pool repair services in Waco handles the full range.

Why Waco Pools Benefit from Fiberglass

The Standard Your Investment Deserves

Clay Soil

Expansive Clay & Mature Roots

Waco sits at the heart of the Blackland Prairie — a Houston Black Vertisol clay that swells and contracts dramatically with every rain-drought cycle. Central Texas's extremes make this movement more severe than in most North Texas markets.

Clay movement cracks rigid plaster and gunite repeatedly
Mature root systems add unpredictable directional pressure
Fiberglass flexes with both clay and root movement
No cracking — regardless of seasonal soil shifts

Hard Water

WWU Hard Water — 120–160 mg/L

Waco Water Utilities delivers water at 120–160 mg/L total hardness — significantly harder than many DFW water supplies. This calcium-rich water etches plaster and marcite, deposits scale, and accelerates gel coat roughness on fiberglass. Fiberglass is chemically inert and non-porous — WWU water has no mechanism to attack it.

WWU calcium deposits cannot penetrate fiberglass's non-porous surface
45% reduction in chemical usage — less calcium to fight
No more acid washing to remove scale from plaster or marcite
Glass-smooth finish stays smooth regardless of water hardness

Central Texas Heat

97°F Highs & 108°F Heat Index

Waco summers average 97°F in August with a heat index above 108°F and a long April–October pool season. Seven months of sustained UV exposure, thermal cycling, and chemical load accelerate traditional surface degradation faster than most Texas markets.

UV oxidizes and fades plaster and marcite year over year
Fiberglass gel coat contains UV inhibitors — resists fading
Thermal cycling cracks rigid surfaces over DFW winters
Fiberglass flexes with temperature extremes — no cracking

Aging Pool Stock

3rd & 4th Plaster Cycle

Most Waco residential pools were built in the 1970s through 1990s and are now on their 3rd or 4th plaster cycle. Every replastering is followed by 5–7 years of WWU hard water and clay movement degrading the surface again — until fiberglass permanently ends the cycle.

Aging gunite shells assessed for structural integrity before conversion
Full warranty paperwork and completion documentation at handover
One conversion permanently ends the replaster cycle
Non-disruptive installation — no demolition, no heavy equipment

Result: For Waco pools, fiberglass isn't a premium upgrade — it's the permanent solution that Blackland Prairie clay, WWU hard water, and aging pool stock demand.

Our Waco Fiberglass Process

From Drain to Swim in Under 2 Weeks

01

Day 1

Assessment & Drain

Technician confirms system selection
Pool drain coordinated on-site
Landscaping protection plan agreed
HEXConvert™ or Fibre Tech™ confirmed

02

Days 2–3

Surface Preparation

Existing surface cleaned, etched, and profiled
Blackland Prairie clay-driven structural cracks resolved
Equipment access routes protect landscaping throughout

03

Days 4–6

System Application

Applied in multiple layers by certified technicians
Hand-crafted to every contour — pool, spa, steps, ledges
Quality checkpoints throughout

04

Days 7–8

Cure & Inspection

Cures under controlled conditions
Central Texas summer heat accelerates the cure phase
Full quality inspection before refill authorized

05

Days 9–10

Refill & Warranty

Pool refilled, water chemistry balanced
Warranty paperwork and completion documentation delivered
HEXConvert™: 10-yr comprehensive — starts day one
Fibre Tech™: 25-yr material — transfers with the property

No demolition required · Landscaping protected throughout

Schedule Your Assessment

Why Waco Chooses Hexagon

Fiberglass specialists — serving Waco and McLennan County

01

Waco Neighborhood Expertise

Experienced with Sanger Heights, Hillcrest, Woodway & Bellmead
Full warranty paperwork and completion documentation delivered at completion

02

WWU Hard Water Expertise

Experienced with Waco's standard 400–550 sq ft residential pool formats
WWU water chemistry guidance specific to 120–160 mg/L supply
Aging gunite shell assessment and repair included in preparation

03

Industry Recognition

Texas Pool & Spa Association certified
Certified Pool Operators on every project
$2M liability insurance

04

Exclusive Technology

HEXConvert™ proprietary to Hexagon
Exclusive Fibre Tech™ materials
Methods developed over 3 decades
Factory direct quality assurance

Our Waco Service Area

Proudly serving Waco and surrounding areas within a 30-mile radius.

(972) 789-2983Click to call

Waco Neighborhoods We Serve

Trusted by homeowners across Waco and McLennan County

North Waco

Sanger Heights & Castle Heights

Sanger Heights Castle Heights Kendrick Park North Waco

Specialty Established neighborhood expertise with 1970s–1980s pool stock on 3rd plaster cycle

Challenge Active Blackland Prairie clay and aging gunite shells requiring structural assessment

West / Woodway

Woodway & China Spring

Woodway China Spring Lake Shore Drive McGregor Road

Specialty Mixed 1980s–2000s pool stock, high WWU hard water impact on plaster and vinyl liners

Challenge Blackland Prairie clay transitions and mature tree root systems

Central Waco

Hillcrest & Lake Air

Hillcrest Lake Air Beverly Hills Richland Hills

Specialty Central Waco pools — mixed 1970s–2000s stock, high WWU hard water impact

Challenge Aging pool shells with consistent clay cycling and WWU hard water exposure

South / Bellmead

Bellmead & Hewitt

Bellmead Hewitt Lacy-Lakeview South Waco

Specialty Older residential pools with vinyl liner and aging plaster — strong conversion candidates

Challenge Elevated clay activity and WWU hard water compounding surface deterioration

Service Area

All Waco neighborhoods covered

Every Waco neighborhood — Sanger Heights, Hillcrest, Woodway, Bellmead, and beyond — receives the same quality standards, materials, and warranty protection. Complete completion documentation is provided for every job.

Confirm Your Coverage

Waco Success Stories

Real Results from Your Neighbors

Sanger Heights

WWU hard water — finally a surface that won't scale

We had replastered three times in 19 years. Every contractor said the same thing — it's the hard water. What they didn't offer was a permanent fix. Hexagon converted to fiberglass and explained exactly why WWU water can't damage this surface. Two full Waco summers in — no scaling, no staining, still glass-smooth.

David & Susan Morales, Sanger HeightsPool with spa · HEXConvert™ 10-yr warranty · Investment: $14,800

Woodway

Clay cracking — finally solved for good

We'd repaired the same structural crack four times in ten years. Every contractor said the same thing — it's the clay. What they didn't say was that fiberglass could fix it permanently. Hexagon's conversion addressed the root cause. Two full Central Texas summers since — not a single crack.

James & Linda Bauer, WoodwayPool Age: 21 years · HEXConvert™ 10-yr warranty · Investment: $13,600

Hillcrest

Landscaping untouched — exactly as promised

We have mature pecans we've been growing for 25 years. I was explicit: don't touch them. Hexagon's crew mapped their equipment route around every tree, laid protective mats around root zones, and left our yard exactly as they found it. The pool, on the other hand, looks completely new.

Robert & Carol Henderson, HillcrestPool Age: 24 years · Fibre Tech™ 25-yr warranty · Investment: $16,200

South Waco

25-year warranty transferred at closing

We converted before listing because we knew buyers would ask about the pool — it was 28 years old. The Fibre Tech™ 25-year transferable warranty went into our listing sheet. Our real estate attorney confirmed it legally transfers at closing. We sold in 6 days. The buyers specifically mentioned the pool.

Marcus & Angela Reyes, South WacoFibre Tech™ warranty transferred at closing · Investment: $12,900

Investment Analysis

What Fiberglass Actually Costs You Over Time

Waco homeowners who switch to fiberglass save an average of $20,000 over 15 years compared to the traditional replaster cycle.

Cost Item	Plaster (15 yrs)	Fiberglass (15 yrs)
Resurfacing / Replaster	$18,000–$25,0002 replasters	$0
Annual Chemical Costs	$1,000–$1,300/yr	$500–$650/yr50% less
Algae Treatment & Cleanup	$400–$550/yr	$125–$150/yr
Surface Repairs	$2,100–$2,700 over life	Warranty covered
15-Year Total Cost	$41,000–$55,000	$24,000–$32,000

Estimates based on McLennan County market averages. Actual savings vary by pool size and condition.

Average Waco Homeowner Saves

$20,000

over 15 years by switching from plaster to fiberglass — one of the most cost-effective long-term decisions for your pool.

Calculate My Savings

Frequently Asked Fiberglass Pool Questions

Waco pool conversions typically range from $10,000 to $15,000 depending on pool size, condition, and features. Waco's standard 400–550 sq ft residential pools — most built in the 1970s through 1990s — fall in the $11,000–$14,000 range. This replaces the 7-year replaster cycle ($7,000–$11,000 per cycle) with one permanent installation backed by a 25-year structural warranty.

Two compounding factors accelerate plaster degradation in Waco: WWU (Waco Water Utilities) hard water at 120–160 mg/L etches and erodes plaster surfaces faster than softer water supplies, and Blackland Prairie clay soil expands and contracts dramatically with every rain-drought cycle, cracking rigid plaster and gunite shells on a predictable schedule. Most Waco pools are on their 3rd or 4th plaster cycle for these reasons. Fiberglass ends that cycle permanently.

Yes — we serve all Waco neighborhoods including Sanger Heights, Castle Heights, Hillcrest, Lake Air, Woodway, China Spring, Bellmead, Lacy-Lakeview, Hewitt, South Waco, and surrounding McLennan County communities. Our team is based in North Texas and provides same-day consultations throughout the region at no charge.

Waco homeowners on the replaster cycle typically spend $7,000–$11,000 every 7 years — up to $44,000 over 20 years when you include chemical premiums, acid washing, and clay-movement structural repairs. A single fiberglass conversion at $10,000–$15,000 eliminates that cycle permanently. Factor in lower chemical costs (fiberglass is non-porous so algae has no foothold against WWU hard water) and you're looking at approximately $44,500 in savings over 20 years on a standard Waco pool.

Yes — older pools are ideal candidates for fiberglass conversion. Waco's 1970s–1990s gunite shells are structurally sound but the plaster surface has been degraded by years of WWU hard water exposure and Blackland Prairie clay movement. We assess shell integrity during a free consultation and address any structural issues before conversion begins. The older the pool, the more financial sense conversion makes.

Waco Water Utilities (WWU) delivers water at 120–160 mg/L total hardness — significantly harder than many DFW water supplies. This calcium-rich water etches plaster and marcite surfaces, deposits scale, and accelerates surface roughness. Fiberglass is chemically inert and non-porous, so WWU hard water has no mechanism to attack it. We specifically recommend fiberglass to Waco homeowners for this reason.

Our Fibre Tech™ 25-year structural warranty covers the fiberglass shell against delamination, blistering, and structural failure — and transfers to new owners at closing, which Waco homeowners regularly list as a selling point when buyers ask about the pool. HEXConvert™ installations carry a 10-year comprehensive labor and materials warranty that also transfers with the property.

Standard Waco pool conversions complete in 7–10 days. Days 1–2: drain, surface preparation, and structural assessment. Days 3–6: HEXConvert™ or Fibre Tech™ fiberglass application and curing. Days 7–8: coping, tile, and equipment reinstallation. Days 9–10: refill, water chemistry balance, and completion documentation delivery.

Yes — our system works for virtually any pool configuration. Waco's standard 400–550 sq ft residential pools are straightforward conversions. We also handle irregular shapes, pools with attached spas, tanning ledges, and pools with existing crack damage from Blackland Prairie clay cycling. Shell geometry and structural assessment are included in the free consultation.

HEXConvert™ Resurfacing is our proprietary fiberglass resurfacing system. We bond a multi-layer fiberglass-and-gelcoat surface over your existing concrete, gunite, or plaster shell to create one continuous, non-porous, factory-smooth finish. Unlike plaster — which has to be redone every 7–10 years — a HEXConvert™ surface is a one-time installation backed by a 10- or 25-year warranty.

Re-Gel is the gelcoat-renewal stage of the HEXConvert™ system. We apply a fresh, color-matched gelcoat over the fiberglass to restore the smooth, glossy finish and protect it against UV, pool chemicals, and everyday wear — bringing an existing fiberglass surface back to like-new condition without a full rebuild.

Fiberglass lasts 25+ years vs 7-10 for plaster, reduces chemical usage by 75%, prevents algae growth, and never needs acid washing.

Our 25-year warranty covers the fiberglass shell against structural defects, delamination, blistering, and fading. It's transferable to future homeowners.

Both deliver the same smooth, permanent fiberglass surface — the difference is the warranty. HEXConvert™ is our proprietary system with a 10-year comprehensive (labor and materials) warranty and the fastest install. Fibre Tech™ carries a 25-year transferable material warranty, ideal if you may sell since it follows the home. We'll help you choose at the consultation.

Yes! Pool conversion works excellently for old or damaged pools. In fact, conversion is often the best solution for aging pools with cracks, surface deterioration, or structural issues. Our Fibre Tech™ system bonds directly to your existing concrete/gunite structure and can bridge minor cracks while providing structural reinforcement. We've successfully converted pools that are 30+ years old. During your free consultation, we'll assess your pool's condition and recommend the best approach for your specific situation.

Yes! Our Fibre Tech™ technology is custom-molded to fit any pool shape and size, from standard rectangles to custom freeform designs.

Your pool will look better! You can choose from various colors and the smooth gel-coat surface is more attractive than weathered plaster.

Absolutely! Fiberglass is completely salt-resistant, unlike concrete which can deteriorate from salt exposure.

Usually no. Most existing equipment works perfectly with fiberglass. We'll assess during consultation and recommend upgrades only if beneficial.

LIMITED TIME — Waco Fiberglass Special

Save $1,500 on Your Pool Conversion

Book your Waco fiberglass assessment before July 4, 2026

$1,500 OFFany conversion over $15,000

Complimentarypool assessment ($500 value)

0% Financingfor 18 months (qualified buyers)

Transferable Warranty10 or 25-year coverage included

Exclusive to Waco fiberglass projects. Limited appointments available.

Start Your Transformation — 972-789-2983

Waco Fiberglass Pool Repair & Resurfacing 7-10 Day Install

Get Your Complimentary Waco Quote

Waco Pool Services

Fiberglass Pool Resurfacing

Fiberglass Pool Conversion

Re-Gelcoat Restoration

Fiberglass Pool Repair

Why Waco Pools Benefit from Fiberglass

Expansive Clay & Mature Roots

WWU Hard Water — 120–160 mg/L

97°F Highs & 108°F Heat Index

3rd & 4th Plaster Cycle

Our Waco Fiberglass Process

Assessment & Drain

Surface Preparation

System Application

Cure & Inspection

Refill & Warranty

Why Waco Chooses Hexagon

Waco Neighborhood Expertise

WWU Hard Water Expertise

Industry Recognition

Exclusive Technology

Our Waco Service Area

Waco Neighborhoods We Serve

Sanger Heights & Castle Heights

Woodway & China Spring

Hillcrest & Lake Air

Bellmead & Hewitt

All Waco neighborhoods covered

Waco Success Stories

What Fiberglass Actually Costs You Over Time

Frequently Asked Fiberglass Pool Questions

1 How much does a pool conversion cost in Waco?

2 Why do Waco pools need resurfacing so frequently?

3 Do you serve my neighborhood in Waco?

4 What are the long-term savings compared to replastering?

5 Will conversion work for my 1970s or 1980s Waco pool?

6 How does Waco's hard water affect my pool surface?

7 What's included in the 25-year warranty?

8 How long does the conversion process take?

9 Can you convert any size or shape of pool?

10 What is HEXConvert™ Resurfacing?

11 What is HEXConvert™ Re-Gel?

12 What makes fiberglass better than plaster?

13 What's included in your 25-year warranty?

14 Should I choose HEXConvert™ or Fibre Tech™?

15 Will conversion work for an old or damaged pool?

16 Can you convert any pool shape?

17 Will my pool look different after conversion?

18 Is fiberglass safe for saltwater systems?

19 Do I need to replace my pool equipment?

Save $1,500 on Your Pool Conversion

Your Home Deserves a Pool Surface That Matches It