Central Texas Fiberglass Pool Repair & Resurfacing

Central Texas Pool Services

Complete fiberglass solutions for every pool type

Fiberglass Pool Resurfacing

Replace deteriorating plaster or marcite on your Central Texas pool with permanent fiberglass — eliminating the surface failures that Hill Country rock shelf, limestone-rich hard water, and 100°F summers cause on traditional materials.

Ready to refinish your pool for good? Fiberglass eliminates the cracking and chemical erosion plaster can't survive.

Permanent surface vs. recurring $6,000–$12,000 replastering
Glass-smooth — never rough, stained, or scaled again
Up to 45% reduction in chemical usage
Algae-resistant non-porous surface
Choice of 10-yr or 25-yr transferable warranty

7-10 Day Install 10 or 25-Yr Warranty HOA Documentation Included

Learn About Central Texas Resurfacing

Fiberglass Pool Resurfacing in Central Texas — before and after

What Is Pool Resurfacing — and Why Does Your Central Texas Pool Need It?

Pool resurfacing removes or overcoats your pool's existing interior finish and applies a new, durable surface layer to the shell. Across Central Texas, that surface degrades faster than the national average for region-specific reasons: in Austin and the Hill Country, thin soils over the Edwards Plateau and Balcones Escarpment limestone rock shelf drive settlement that cracks rigid finishes; limestone-rich hard water deposits calcium scale on porous plaster region-wide; and a long, hot season with 100°F-plus summers drives sustained UV and chemical wear. Along the I-35 corridor toward Waco and Hillsboro the soil transitions to Blackland Prairie expansive clay, and the Brazos Valley around Bryan-College Station sits on Post Oak Savannah sandy loam.

Left unaddressed, a failing surface gets progressively more expensive — rough plaster holds calcium deposits and demands more aggressive acid washing, while cracks let water migrate behind the shell where rock-shelf settlement or expansive clay compounds the damage. Resurfacing before the surface reaches failure is always cheaper than remediation after it.

Signs Your Central Texas Pool Needs Resurfacing

Rough or sandpaper texture on floor and walls
Persistent staining acid washing no longer removes
Visible cracks, chips, or delaminating patches
Chalky calcium deposits or efflorescence
Recurring algae despite correct chemistry
Fading, discoloration, or uneven finish color
Unexplained water loss (surface micro-leaks)
Surface age over 7 years on plaster or marcite

Pool Resurfacing Services in Central Texas

Hexagon resurfaces every pool type found across Central Texas — from aging plaster gunite pools in the Austin metro and Hill Country to vinyl-liner pools in Waco, Killeen-Temple, and the Brazos Valley. Every path ends the same way: a permanent fiberglass surface engineered for Central Texas conditions.

Most Common

Plaster & Marcite Resurfacing

The majority of Central Texas pools built before the 2010s have white plaster or marcite interiors that limestone-rich hard water scales and rock-shelf settlement or expansive clay movement cracks. Hexagon removes the deteriorated layer, repairs structural cracks in the gunite shell, and applies HEXConvert™ or Fibre Tech™ fiberglass directly to the prepared surface — ending the replaster cycle permanently.

Replastering eliminated — not deferred
Structural crack repair included in prep
Fiberglass bonds directly to gunite shell
Glass-smooth finish, never rough again

Growing Demand

Pebble & Aggregate Resurfacing

Pebble and aggregate finishes installed across the Austin metro and Hill Country in the 2000s–2010s roughen under limestone-rich hard water within a decade, becoming abrasive and hard to balance. Fiberglass resurfacing over aggregate delivers a glass-smooth, chemically neutral surface without shell demolition.

Hard-water mineral embed in aggregate ended permanently
Applied over existing aggregate — no demolition
Chemical neutrality reduces balancing burden
Glass-smooth, algae-resistant replacement

Waco & I-35 Suburban

Vinyl Liner Pool Resurfacing

Vinyl liner pools in Waco, the Killeen-Temple area, and the Brazos Valley carry a recurring liner-replacement cost every 7–10 years, and Central Texas soil movement accelerates seam failure. Hexagon resurfaces vinyl liner pools with a permanent fiberglass interior — eliminating liner replacement and the soil-driven shell movement at once.

Liner replacement cycle eliminated permanently
Soil-driven shell movement addressed
Permanent non-porous surface over prepared shell
Handles any Central Texas pool shape

Existing Fiberglass

Fiberglass Re-Resurfacing

Older fiberglass pools show oxidation, gel-coat fading, and spider cracking under intense Texas-sun UV and limestone-rich hard water. Hexagon re-resurfaces aging shells by grinding, repairing, and applying a fresh HEXConvert™ or Fibre Tech™ system — restoring like-new performance with full warranty from day one.

Restores shells degraded by Central Texas UV and hard water
Blisters and settlement-driven spider cracks repaired first
Full transferable warranty from day one
15–20 year life extension

Why Fiberglass Resurfacing — Not Replaster, Pebble Tec, or Epoxy Paint

Central Texas homeowners are typically presented with four resurfacing options. Here is an honest comparison of how each performs against Hill Country rock shelf, Blackland clay, limestone-rich hard water, and heat-and-freeze over a 20-year ownership horizon.

Surface Type	Lifespan	20-Yr Cost	Hard Water	Soil Movement
White Plaster	5–7 yrs	$54k–$96k	Scales within months	Cracks with settlement
Marcite	6–8 yrs	$48k–$80k	Stains & scales rapidly	Cracks with movement
Pebble / Aggregate	8–12 yrs	$40k–$64k	Roughens in hard water	Cracks with movement
Epoxy Paint	2–4 yrs	$60k–$90k+	Peels in Central Texas heat & UV	Delamination risk
✓ HEXConvert™ / Fibre Tech™ Fiberglass	20–30 yrs	$12k–$19k	Non-porous — no scale	Flexes — no cracking

* 20-year cost estimates are illustrative, based on typical Central Texas pool sizes (600–900 sq ft). Includes material, labor, and chemistry costs per cycle.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Central Texas owners on a long-term hold — fastest installation, comprehensive warranty, no future surface decisions.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Central Texas owners with a 5–10 year resale horizon — the 25-year transferable warranty documents a premium pool upgrade anywhere in the region.

Ready to End the Replastering Cycle in Central Texas?

Hexagon assesses your Central Texas pool, confirms the right system, and gives you a fixed-price quote — no surprises, no upsells, no replaster in 5 years.

Get Your Free Central Texas Resurfacing Assessment

Save $20k–$40k lifetime

Fiberglass Pool Conversion

Vinyl liner, gunite, concrete, or aging fiberglass — Hexagon converts all pool types to superior fiberglass without excavation, keeping your existing Central Texas pool structure.

Vinyl liner → fiberglass — eliminates recurring liner replacement
Gunite → fiberglass — stops settlement- and clay-driven structural cracking
Concrete → fiberglass — ends perpetual maintenance cycles
No excavation — decking and landscaping untouched

HEXConvert™ 10-yr Fibre Tech™ 25-yr No Excavation

Explore Central Texas Conversion

Fiberglass Pool Conversion in Central Texas — before and after

What Is a Fiberglass Pool Conversion — and Is It Right for Your Central Texas Pool?

A conversion is a complete interior system change — transforming your pool from its current surface (vinyl liner, plaster, gunite, concrete) to a permanent, non-porous fiberglass shell. Unlike resurfacing, conversion is the right call when the underlying system has reached the end of its service: a vinyl pool on its second-plus liner, a gunite shell that cracks again after every rock-shelf- or clay-driven repair, or a maintenance bill that now rivals the one-time cost of a permanent fix.

Hexagon performs every Central Texas conversion without excavation — no disruption to decking, landscaping, or outdoor living space. The entire conversion is completed from inside the pool in 7–10 days.

You're a Conversion Candidate If…

Your vinyl liner has been replaced once or more
Your gunite or concrete pool cracks recur after repair
Annual maintenance exceeds $3,000 with no improvement
Your pool has multiple simultaneous failure types
You're preparing the property for sale
Your pool is 15+ years old with no system upgrade

Fiberglass Pool Conversion by Pool Type

Hexagon converts every pool type found across Central Texas. The method is tailored to the existing shell — but the outcome is always the same: a permanent, low-maintenance fiberglass interior with full warranty coverage.

Most Requested

Gunite & Shotcrete Conversion

Gunite is the most common pool type in Central Texas's established neighborhoods. In Austin and the Hill Country, thin soils over a limestone rock shelf drive settlement that develops structural cracks returning after every repair; along the I-35 corridor toward Waco, expansive Blackland clay does the same as the ground shifts seasonally. Conversion ends the cycle with a flexible, non-porous fiberglass surface that accommodates the movement that makes rigid concrete crack.

Structural crack cycle ends permanently
Flexible fiberglass accommodates rock-shelf and clay movement
Applied directly to prepared gunite shell
Pool and spa unified under one surface

Highest ROI

Vinyl Liner Conversion

Vinyl liner pools carry a recurring replacement cost every 7–10 years, and Central Texas conditions push degradation to the shorter end. A conversion eliminates the cycle entirely — Hexagon prepares the existing shell, repairs underlying damage, and installs a permanent fiberglass interior.

Recurring liner-replacement cost eliminated
Underlying shell damage repaired first
No more wrinkling, fading, or tearing
Non-porous surface for the life of the pool

Full Upgrade

Concrete & Older Shells

Older concrete and block shells in Central Texas's mature neighborhoods are vulnerable to mortar degradation and water infiltration in shifting soil. Hexagon waterproofs and stabilizes the structure before applying fiberglass, creating a sealed, unified interior without full demolition.

Structure assessed and stabilized first
Water migration behind the shell stopped
Sealed, unified fiberglass interior
Viable alternative to demolition and rebuild

Premium Upgrade

Fiberglass-to-Fiberglass

An existing fiberglass pool with a failing original surface — blistering, spider cracks, oxidation — is a strong conversion candidate. Rather than patch a compromised shell, Hexagon removes the failed layer, inspects and repairs the structure, and applies a fresh system with full new warranty.

Failed gel coat fully removed
Structural shell inspection and repair
Full warranty — transfers at sale
Preferred over repeated patch repairs

Why Central Texas Homeowners Choose Conversion Over Continued Maintenance

The financial and practical case for conversion is clear when you compare the cumulative cost of maintaining a traditional surface against the one-time cost of a permanent fiberglass system.

No Excavation. No Disruption.

The entire conversion is performed from inside the pool. No digging, no equipment on your lawn, no damage to decking, irrigation, mature trees, or outdoor kitchen structures. Central Texas properties with custom outdoor living spaces, pergolas, and fencing present no complications — Hexagon never requires ground disturbance for a conversion project.

The 20-Year Financial Case

A Central Texas pool on a traditional plaster or vinyl liner cycle costs tens of thousands of dollars over 20 years in surface maintenance alone — accelerated by limestone-rich hard water, rock-shelf and clay movement, and the long Central Texas pool season. A one-time fiberglass conversion costs $8,000–$20,000 and requires no further surface work within the warranty period. The difference is the conversion's return on investment.

A Documented Central Texas Resale Asset

In the active Austin-metro and broader Central Texas real estate market, a Fibre Tech™ 25-year transferable warranty is a documented asset that survives a sale and follows the property. For homeowners across the Hill Country, Waco, and the Brazos Valley with a resale horizon, a warranted fiberglass conversion is one of the higher-ROI pool improvements available — turning a maintenance liability into a selling point.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Central Texas homeowners maximizing long-term value and minimizing time out of the pool.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Central Texas owners planning to sell — the transferable 25-year warranty is a documented asset in the region's active market.

Stop Maintaining. Start Converting.

Hexagon assesses your Central Texas pool's structure, recommends the right conversion system, and gives you a fixed-price quote. No excavation. Done in 7–10 days.

Get Your Free Conversion Assessment

Existing Fiberglass Pools

Pool Gelcoat Repair

Already have a fiberglass pool? Gel coat fades, oxidizes, and develops spider cracks — especially under intense Central Texas UV and limestone-rich hard water. Re-gelcoating restores factory-fresh condition without replacing the shell.

Fraction of the cost of full replacement
Color-matched or upgrade to a new color
Restores UV protection and chemical resistance
Addresses spider cracks and blistering
Extends pool life by 15–20 years

3–5 Day Turnaround Color-Matched

Get a Gelcoat Assessment

Full Gel Coat Restoration

Widespread oxidation and fading refinished as one unified coat.

Oxidation & UV Fade

Chalky, porous finish restored — common under the intense Texas sun.

Spider Crack Repair

Rock-shelf and clay-driven cracks ground out and color-matched.

Osmotic Blister Repair

Blisters opened, laminate rebuilt, chemistry corrected.

What Is Pool Gel Coat — and Why Does Your Central Texas Fiberglass Pool Need It?

Gel coat is the outermost layer of a fiberglass pool — the resin finish that provides color, gloss, chemical resistance, and UV protection. When a fiberglass pool looks faded, feels rough, or shows cracks or blisters, it's the gel coat that has degraded, not the structural shell beneath it.

Central Texas's climate accelerates that degradation: long, intense summer UV oxidizes the surface, limestone-rich hard water dulls the gloss and traps algae, and the region's ground movement — rock-shelf settlement in the Hill Country, expansive clay along the I-35 corridor — stresses the shell into spider cracks at fittings and steps. Left unaddressed, degraded gel coat exposes the laminate beneath — turning a cosmetic issue into a structural one.

Signs Your Central Texas Pool Needs Gel Coat Repair

Faded, chalky, or dull finish
Spider cracks on floor, walls, or around fittings
Osmotic blisters — raised bubbles on the surface
Rough texture in previously smooth areas
Gel coat separating from the shell
Persistent staining despite correct chemistry
Patchy color across pool and spa
Pool 10+ years old with no gel-coat service

Pool Gel Coat Repair Services in Central Texas

Hexagon diagnoses the root cause of every gel coat issue before beginning work — intense Texas-sun UV, limestone-rich hard water, and the region's soil movement each produce distinct failure patterns requiring different repair approaches. All work is color-matched to your existing finish or upgraded to a premium modern color.

Most Comprehensive

Full Gel Coat Restoration

When oxidation, fading, and minor surface damage are widespread across the pool, a full gel coat restoration is the most cost-effective approach. Hexagon mechanically prepares the entire surface, addresses all underlying defects, and applies a fresh, UV-stabilized gel coat layer across the pool and spa as a unified refinish. The result is a pool that looks, feels, and performs as it did when first installed — with a color-matched or upgraded finish carrying UV inhibitors engineered for Central Texas's long, hot summers.

Complete pool and spa surface unified under new coat
Mechanically prepared — not chemically stripped
UV inhibitors resist the long Central Texas summer
Choice of color match or premium color upgrade

Most Common in Central Texas

Oxidation & UV Fade Repair

Oxidation is the most common gel coat issue on Central Texas fiberglass pools — caused by sustained UV exposure breaking down the resin polymers in the gel coat surface. Across the long, sunny Central Texas pool season, the finish loses its gloss, turns chalky white or gray, and becomes increasingly porous, holding algae and resisting cleaning. Hexagon's oxidation treatment removes the degraded surface layer, restores chemical resistance and UV protection, and brings the original color back to a like-new standard without shell replacement.

Chalky, dull finish restored — not polished over
Porous oxidized layer mechanically removed
Algae resistance restored for the full pool season
Effective on all fiberglass pool colors and ages across Central Texas

Soil-Movement Related

Spider Crack Repair

Spider cracks in fiberglass gel coat are a direct consequence of ground movement — and Central Texas serves up two forms of it: Hill Country rock-shelf settlement over the Edwards Plateau and expansive Blackland clay along the I-35 corridor toward Waco. Spider cracks typically radiate from stress points: fittings, steps, corners, and floor areas. Hexagon repairs spider cracks by grinding each crack to sound material, filling and laminating the substrate, then applying a color-matched gel coat patch that is invisible under water.

Region's soil movement identified as root cause
Each crack ground to sound substrate — not filled over
Structural laminate repaired beneath the gel coat
Color-matched finish — invisible under water

Hard-Water Related

Osmotic Blister Repair

Osmotic blistering occurs when water molecules penetrate a compromised gel coat and accumulate between the gel coat and the fiberglass laminate, forming raised bubbles on the pool surface. In Central Texas, limestone-rich hard water carries a mineral load that, at low pH, accelerates the osmotic process. Hexagon repairs blisters by opening each blister, cleaning the underlying cavity, rebuilding the laminate substrate, and applying gel coat over the repaired area. Water chemistry guidance is provided to prevent recurrence.

Every blister opened, cleaned, and rebuilt — not flattened
Underlying laminate damage addressed before gel coat
Limestone-rich hard-water chemistry guidance provided
Prevents escalation to full delamination

Why Central Texas Homeowners Should Not Delay Gel Coat Repair

Gel coat issues follow a predictable escalation path. What begins as a cosmetic problem — fading, minor cracking — becomes a structural and financial problem if left unaddressed through another Central Texas pool season.

Cosmetic → Structural

Spider cracks left unfilled allow water to penetrate to the fiberglass laminate. Once water reaches the laminate under Central Texas's settlement and shrink-swell conditions, freeze-thaw and hydrostatic pressure cycles cause delamination — separating the gel coat from the shell in sheets. A small crack repair becomes a far larger delamination job within a few Central Texas seasons.

The Long Central Texas Pool Season

Central Texas pools see a long swim season under intense summer sun. Every month a pool sits with oxidized, cracked, or blistered gel coat is a month of accelerated UV and chemical damage to the structural laminate beneath. Addressing gel coat deterioration in the cooler off-season protects the full season ahead and avoids emergency repairs when temperatures peak in July and August.

Central Texas Resale Value

In the active Austin-metro and broader Central Texas real estate market, a documented, warranted gel coat restoration signals a well-maintained pool to buyers. A pool in poor visible condition invites a price reduction or an inspection contingency; a restored, warranted surface protects the asking price and shortens time on market.

What to Expect: The Gel Coat Repair Process

Most Central Texas gel coat repair projects complete in 3–5 days. Full restorations on pools with integrated spas typically take 5–7 days. No excavation, no heavy equipment, no disruption to your outdoor living space.

Day 1

Assessment & Drain

Hexagon technician inspects the full pool and spa surface under water and dry conditions. Failure type, extent, and root cause confirmed. Pool drained and surface allowed to dry before work begins.

Days 2–3

Surface Preparation

Defects addressed at substrate level — cracks ground and laminated, blisters opened and rebuilt, oxidized surface mechanically abraded. All preparation work is inspected before gel coat is applied.

Days 3–5

Gel Coat Application

Color-matched or upgraded gel coat applied in controlled layers across all repaired and restoration areas. Spa and pool surface unified under the same finish. Edge-to-edge blending ensures no visible repair lines.

Days 5–7

Cure, Polish & Handover

Gel coat cures under Central Texas ambient conditions. Surface buffed to premium gloss. Full inspection completed. Limestone-rich hard-water chemistry guidance provided. Warranty documentation issued at handover.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Central Texas owners restoring an aging fiberglass pool to like-new condition without shell replacement.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Central Texas owners preparing to sell — a documented, warranted restoration signals a well-maintained pool.

Restore Your Central Texas Pool to Premium Condition

Hexagon assesses your fiberglass pool's gel coat, identifies every defect, and provides a fixed-price repair quote. Most jobs complete in 3–5 days.

Get Your Free Gel Coat Assessment

3–5 Day Turnaround

Fiberglass Pool Repair

Central Texas's limestone rock shelf, expansive clay, and limestone-rich hard water create fiberglass-specific challenges that require specialist techniques. Hexagon diagnoses and resolves the root cause — not just the symptom.

Cracks, bulges, and leaks all trace to a root cause — and our fiberglass pool crack repair finds and fixes it.

All repairs color-matched to existing finish
Structural repairs address the soil root cause
Most jobs completed in 3–5 days
Up to 5-year warranty on structural repair work

3–5 Day Turnaround Up to 5-Yr Warranty

Schedule a Repair Assessment

Structural Crack Repair

Rock-shelf and clay-driven cracks laminated and color-matched.

Skimmer Repair & Replace

Cracked housings resealed against water migration.

Fitting & Line Leaks

Pressure- and dye-tested; shell penetrations resealed.

Step, Bench & Ledge

Delaminated layers re-bonded and reinforced.

Why Fiberglass Pool Repair in Central Texas Requires a Different Approach

Fiberglass repairs aren't interchangeable with plaster or concrete repairs — and Central Texas's conditions make the distinction critical. The dominant forces on the region's pools are the Hill Country's limestone rock shelf and caliche, which drive settlement that concentrates stress at fittings, steps, and shell seams, and — along the I-35 corridor toward Waco — expansive Blackland clay that expands and contracts with the wet-dry, freeze-thaw cycle. The Brazos Valley adds Post Oak Savannah sandy loam to the mix.

Hexagon's repair process begins with a root-cause assessment, not just a visual inspection. We identify whether damage originates from rock-shelf settlement, clay movement, water chemistry, or structural fatigue — and address the underlying cause before any surface repair. Every repair is color-matched and warranted.

Pool Problems That Need Immediate Attention

Visible cracks on floor, walls, or around fittings
Water loss beyond normal evaporation
Skimmer pulling air — cracked housing or neck
Return fittings loose, leaking, or separating
Step or bench delamination
Bowing or bulging walls (soil pressure)
Repeated algae despite correct chemistry
Equipment pad flooding — possible shell leak

Pool Repair Services in Central Texas

From hairline gel coat cracks to structural shell repairs and full skimmer replacements, Hexagon handles every repair type found on Central Texas pools — root-cause first, warranty-backed, color-matched to your finish.

Most Requested — Rock Shelf & Clay

Structural Crack Repair

Structural cracks in fiberglass pools are the direct result of ground movement — and Central Texas produces it in two forms. In Austin and the Hill Country, thin soils over the Edwards Plateau and Balcones Escarpment limestone rock shelf drive settlement that cracks shells; along the I-35 corridor toward Waco and Hillsboro, expansive Blackland clay cycles load through the shell as it expands when wet and contracts in summer drought and winter freeze. Cracks typically appear on the pool floor, around fittings under directional soil pressure, and at corners where shell geometry concentrates stress. Hexagon repairs structural cracks by exposing the outer shell face where necessary, applying fiberglass laminate to restore structural integrity, and finishing with a color-matched gel coat. The root cause — settlement, soil load, or drainage — is documented and addressed as part of the repair scope.

Rock-shelf settlement or Blackland shrink-swell confirmed as root cause
Laminate repair restores structural shell integrity
Color-matched gel coat — invisible under water
Up to 5-year warranty on all structural crack repairs

Central Texas Most Common

Skimmer Repair & Replacement

Skimmer failure is one of the most common repair calls on Central Texas pools — and one of the most consequential if ignored. The skimmer housing is bonded to the pool shell at the waterline, a location that experiences the highest concentration of thermal cycling, soil movement, and UV exposure. Central Texas's swing from winter freezes to 100°F+ summers creates continuous expansion and contraction stress at the skimmer-to-shell bond. Cracks at the skimmer neck or housing let water bypass the seal and migrate behind the shell, where it interacts with the soil to create sustained hydrostatic pressure. Hexagon repairs cracked housings, replaces failed skimmer bodies, reseals skimmer-to-shell bonds, and installs upgraded units where the original fitting is beyond repair.

Cracked skimmer neck repaired or housing replaced
Skimmer-to-shell bond resealed — thermal and soil movement are primary failure drivers
Upgraded skimmer units specified for the long Central Texas season
Repair stops mineral-laden water infiltration behind the shell face

Water Loss Related

Fitting & Return Line Leak Repair

Return fittings, main drain covers, light housings, and spa jets are all penetration points in the fiberglass shell — and each is a potential leak source as sealants age and soil movement applies shear force to bonded fittings. Limestone-rich hard water deposits mineral scale at penetration points that can compromise the seal bond over time. Unexplained water loss is typically traced to one or more fitting penetrations before a shell crack is confirmed. Hexagon performs a systematic pressure test and dye test to locate all active leaks, then repairs or replaces the affected fittings and reseals the shell penetration to current standards.

Systematic pressure and dye test locates every active leak
Fitting replacements address long-season sealant degradation
Shell penetrations resealed — soil movement shears original sealant bonds
Water loss confirmed resolved before pool is returned to service

Soil & Thermal Cycling

Step, Bench & Ledge Repair

Steps, benches, tanning ledges, and spa walls are the structural elements most vulnerable to delamination and cracking on Central Texas pools. Differential soil settlement — over Hill Country rock shelf or expansive clay — creates uneven support under horizontal surfaces, causing separation between fiberglass laminate layers. Central Texas thermal cycling between winter freezes and summer heat amplifies this stress at the bond line between horizontal and vertical shell sections. Pools with tanning ledges and integrated spas have more horizontal surface area exposed to these forces. Hexagon repairs delaminated steps and ledges by re-bonding the separated layers, applying structural reinforcement where needed, and finishing with a color-matched gel coat.

Delaminated layers re-bonded — not patched over
Soil settlement load assessed and documented
Structural reinforcement applied on high-stress surfaces
Spa, step, and ledge surfaces color-unified on completion

Repair or Replace? Hexagon's Honest Assessment

Not every repair is worth making — and not every damaged pool needs replacing. Hexagon provides an honest structural assessment of every Central Texas pool before quoting, with a clear recommendation based on what actually makes financial sense for the property.

When Repair Is the Right Call

Isolated structural cracks with no shell delamination, a single skimmer failure, fitting leaks on an otherwise sound shell, and step or ledge repairs on a pool with good underlying structure are all strong repair candidates. A targeted repair on a sound fiberglass shell typically extends pool life by 10–15 years at a fraction of resurfacing cost — particularly valuable across the long Central Texas pool season, where every additional year of service has clear dollar value.

When Resurfacing Makes More Sense

When a pool has multiple simultaneous failure types — cracks, blistering, oxidation, and fitting leaks together — the cumulative repair cost often approaches resurfacing cost. In those cases, Hexagon recommends resurfacing over piecemeal repair: one fixed price, one process, a new surface, and a full warranty rather than multiple partial warranties on individual repairs. For Central Texas pools with recurring crack cycles driven by rock-shelf settlement or expansive clay, resurfacing with a fiberglass system permanently eliminates the cycle.

When the Shell Needs Replacing

Severe shell delamination, hydrostatic uplift — where the pool shell has floated due to groundwater pressure — or widespread structural failure from sustained soil loading are cases where repair is not viable. Hexagon will tell you directly when this is the situation — and provide a full replacement or conversion quote rather than charge for repairs that will not hold under Central Texas's soil conditions.

What to Expect: The Pool Repair Process

Most pool repair projects in Central Texas complete in 3–5 days. Structural repairs involving excavation or skimmer replacement may extend to 7 days. No heavy equipment on your lawn — all work performed from pool deck level.

Day 1

Diagnosis & Drain

Root-cause assessment of all damage — pressure test, dye test, visual inspection dry and wet. Soil conditions and drainage documented. Repair scope confirmed before the pool is drained.

Days 2–3

Structural Work

Crack repair, skimmer replacement, fitting resealing, or laminate reinforcement completed at shell level. All structural work inspected and approved before the gel coat phase begins.

Days 3–4

Gel Coat Finishing

Color-matched gel coat applied over all repair areas. Blended edge-to-edge for an invisible finish. Skimmer surrounds and fitting flanges refinished to match the surrounding surface.

Days 4–5

Refill & Warranty

Pool refilled and water chemistry balanced for limestone-rich hard water. All repair work documented. Warranty issued — up to 5 years on structural repairs. Final walkthrough confirms every issue resolved.

Choose Your System: HEXConvert™ or Fibre Tech™

Both systems apply a permanent fiberglass surface to your existing pool. The difference is warranty depth and manufacturing origin.

Hexagon-Proprietary

HEXConvert™

10-year comprehensive labor & materials warranty
Fastest installation path — 7 days typical
Ideal for pools staying with current owner 10+ years
White or light blue standard — other colors available at an upcharge

Best for: Central Texas owners with an isolated repair on an otherwise sound shell — extends pool life 10–15 years at a fraction of resurfacing cost.

Industry Standard

Fibre Tech™

25-year transferable material warranty
Warranty transfers to next owner — adds resale value
Preferred for properties in HOA communities with resale plans
White or light blue standard — other colors available at an upcharge

Best for: Central Texas owners weighing repair vs. resurface — Hexagon gives an honest recommendation based on what makes financial sense.

Don't Let a Small Repair Become a Costly Replacement

Hexagon assesses your Central Texas pool, identifies every repair need, and gives you an honest recommendation — repair, resurface, or replace. Fixed-price quote, root-cause approach, warranted result.

Get Your Free Pool Repair Assessment

Steps, benches, walls, and shells all fail differently, and our pool repair specialists diagnose each to its source.

Why Central Texas Pools Benefit from Fiberglass

Limestone

Hill Country Rock Shelf

The Edwards Plateau and Balcones Escarpment leave Austin and the Hill Country with thin, rocky soils over a limestone rock shelf and caliche — and that rigid base drives settlement issues that crack inflexible surfaces.

Rock-shelf settlement cracks rigid plaster and gunite
Fiberglass flexes with the movement caliche and rock create
No cracking from rock-shelf settlement
Structural crack repair included in prep

Hard Water

Limestone-Rich Hard Water

Central Texas's limestone-rich water — drawn from the Edwards Aquifer and Brazos-basin systems alike — causes calcium buildup that scales porous plaster and drives up the chemical and acid-washing burden.

Calcium scales and stains porous plaster
Non-porous fiberglass resists scale buildup
Up to 45% less chemical usage
No recurring acid-washing cycle

Heat & Freeze

100°F Summers, Winter Freezes

Central Texas swings from 100°F-plus summers to occasional hard winter freezes. The expansion-and-contraction stress fractures rigid surfaces; fiberglass flexes with it.

Thermal cycling cracks plaster and concrete
Fiberglass gel coat resists intense Texas-sun UV fading
Flexes through freeze-thaw without cracking
Holds up across the long Central Texas pool season

Veterans

Proud to Serve Central Texas Veterans

Central Texas — home to Fort Cavazos in the Killeen-Temple area and a large veteran community across the region — is full of veterans and active-duty families. We honor that service with a guaranteed 5% discount on every project, applied at booking.

5% veteran's discount — active duty, retired & surviving spouses
Non-disruptive install — no demolition
Same-week assessments for busy families

Result: For Central Texas pools, fiberglass isn't a premium upgrade — it's the only surface that survives Hill Country rock shelf, Blackland clay, limestone-rich hard water, and 100°F summers year after year, from Austin to Waco to the Brazos Valley.

Our Central Texas Fiberglass Process

From Drain to Swim in Under 2 Weeks

01

Day 1

Assessment & Drain

Technician confirms system selection
Pool drain coordinated on-site
Water disposal per local municipal regulations
HEXConvert™ or Fibre Tech™ confirmed

02

Days 2–3

Surface Preparation

Existing surface cleaned, etched, and profiled
Rock-shelf and clay-driven structural cracks resolved before application
Landscaping and hardscape protected throughout

03

Days 4–6

System Application

Applied in multiple layers by certified technicians
Hand-crafted to every contour — walls, floor, steps
Quality checkpoints throughout

04

Days 7–8

Cure & Inspection

Cures under controlled conditions
Central Texas summer heat accelerates the cure phase
Full quality inspection before refill authorized

05

Days 9–10

Refill & Warranty

Pool refilled, water chemistry balanced
Warranty documentation delivered
HEXConvert™: 10-yr comprehensive — starts day one
Fibre Tech™: 25-yr material — transfers with the property

No demolition required · Landscaping protected throughout · HOA documentation provided at completion

Schedule Your Assessment

Why Central Texas Chooses Hexagon

Fiberglass specialists — serving the whole Central Texas region

01

Central Texas Geology Specialists

Hill Country rock-shelf and limestone expertise across Austin
Experienced from the Austin metro to Waco, Killeen-Temple & the Brazos Valley

02

Full-Scale Capability

Equipped for pools of every size and complexity
Spa, water feature, and tanning ledge expertise
Landscaping and hardscape protection protocol

03

Industry Recognition

Texas Pool & Spa Association certified
Certified Pool Operators on every project
$2M liability insurance

04

Exclusive Technology

HEXConvert™ proprietary to Hexagon
Exclusive Fibre Tech™ materials
Methods developed over 3 decades
Factory direct quality assurance

Our Central Texas Service Area

Proudly serving Central Texas and surrounding areas within a 70-mile radius.

(972) 789-2983Click to call

Central Texas Neighborhoods We Serve

Cities & metros we serve across Central Texas

Austin Metro

Austin Round Rock Georgetown Cedar Park

Specialty Conversions, resurfacing, and gel-coat restoration across the I-35 metro

Challenge Thin soils over limestone rock shelf and limestone-rich hard water

Hill Country

Bee Cave Lakeway Dripping Springs Westlake Hills

Specialty Estate-scale pools with resort finishes on Edwards Plateau terrain

Challenge Rock-shelf settlement, caliche, and elevation changes

South Corridor

San Marcos & New Braunfels

San Marcos New Braunfels

Specialty Full conversions and resurfacing along the southern I-35 corridor

Challenge Balcones Escarpment limestone and hard water

Waco & I-35 North

Waco Hillsboro

Specialty Resurfacing aging plaster and vinyl-liner conversions on established pools

Challenge Eastern transition to Blackland Prairie expansive clay

Killeen-Temple

Killeen-Temple Area

Killeen

Specialty Conversions and repairs for military and active-duty families

Challenge Mixed limestone and clay soils across the Fort Cavazos area

Brazos Valley

Bryan-College Station

Bryan College Station

Specialty Full conversions and gel-coat restoration in the Brazos Valley

Challenge Post Oak Savannah sandy loam and seasonal soil movement

Service Area

All Central Texas neighborhoods covered

Every Central Texas community — from Austin metro and the Hill Country to Waco, the Killeen-Temple area, and Bryan-College Station — receives the same quality standards, materials, and warranty protection. Veterans discount applied at booking, regardless of which part of the region you call home.

Confirm Your Coverage

Investment Analysis

What Fiberglass Actually Costs You Over Time

Central Texas homeowners who switch to fiberglass save an average of $26,000 over 15 years compared to the traditional replaster cycle.

Cost Item	Plaster (15 yrs)	Fiberglass (15 yrs)
Resurfacing / Replaster	$23,000–$30,0003 replasters	$0
Annual Chemical Costs	$1,350–$1,800/yr	$700–$900/yr50% less
Algae Treatment & Cleanup	$450–$550/yr	$125–$175/yr
Surface Repairs	$1,300–$1,700 over life	Warranty covered
15-Year Total Cost	$51,000–$67,000	$29,000–$38,000

Estimates based on Central Texas market averages. Actual savings vary by pool size and condition.

Average Central Texas Homeowner Saves

$26,000

over 15 years by switching from plaster to fiberglass — one of the most cost-effective long-term decisions for your pool.

Calculate My Savings

Frequently Asked Fiberglass Pool Questions

Most pool resurfacing projects in Central Texas take 7-10 days from start to finish, depending on pool size and weather conditions.

Yes! We serve Austin, Waco, Temple, Killeen, Georgetown, Round Rock, and all surrounding Central Texas communities. Call us at (972) 789-2983 to confirm service in your area.

Central Texas heat causes plaster to crack and degrade faster. Fiberglass is heat-resistant and maintains its integrity even in 100°F+ temperatures.

Call us at (972) 789-2983 for a free consultation. We'll assess your pool, discuss options, and provide a detailed quote with no obligation.

HEXConvert™ Resurfacing is our proprietary fiberglass resurfacing system. We bond a multi-layer fiberglass-and-gelcoat surface over your existing concrete, gunite, or plaster shell to create one continuous, non-porous, factory-smooth finish. Unlike plaster — which has to be redone every 7–10 years — a HEXConvert™ surface is a one-time installation backed by a 10- or 25-year warranty.

Re-Gel is the gelcoat-renewal stage of the HEXConvert™ system. We apply a fresh, color-matched gelcoat over the fiberglass to restore the smooth, glossy finish and protect it against UV, pool chemicals, and everyday wear — bringing an existing fiberglass surface back to like-new condition without a full rebuild.

Fiberglass lasts 25+ years vs 7-10 for plaster, reduces chemical usage by 75%, prevents algae growth, and never needs acid washing.

Our 25-year warranty covers the fiberglass shell against structural defects, delamination, blistering, and fading. It's transferable to future homeowners.

Both deliver the same smooth, permanent fiberglass surface — the difference is the warranty. HEXConvert™ is our proprietary system with a 10-year comprehensive (labor and materials) warranty and the fastest install. Fibre Tech™ carries a 25-year transferable material warranty, ideal if you may sell since it follows the home. We'll help you choose at the consultation.

Yes! Pool conversion works excellently for old or damaged pools. In fact, conversion is often the best solution for aging pools with cracks, surface deterioration, or structural issues. Our Fibre Tech™ system bonds directly to your existing concrete/gunite structure and can bridge minor cracks while providing structural reinforcement. We've successfully converted pools that are 30+ years old. During your free consultation, we'll assess your pool's condition and recommend the best approach for your specific situation.

Yes! Our Fibre Tech™ technology is custom-molded to fit any pool shape and size, from standard rectangles to custom freeform designs.

Your pool will look better! You can choose from various colors and the smooth gel-coat surface is more attractive than weathered plaster.

Absolutely! Fiberglass is completely salt-resistant, unlike concrete which can deteriorate from salt exposure.

Usually no. Most existing equipment works perfectly with fiberglass. We'll assess during consultation and recommend upgrades only if beneficial.

LIMITED TIME — Central Texas Fiberglass Special

Save $1,500 on Your Pool Conversion

Book your Central Texas fiberglass assessment before July 4, 2026

$1,500 OFFany conversion over $15,000

Complimentarypool assessment ($500 value)

0% Financingfor 18 months (qualified buyers)

Veterans 5% Discountactive duty, retired & surviving spouses

Exclusive to Central Texas fiberglass projects. Limited appointments available.

Start Your Transformation — 972-789-2983

Central Texas Fiberglass Pool Repair & Resurfacing 7-10 Day Install

Get Your Complimentary Central Texas Quote

Central Texas Pool Services

Fiberglass Pool Resurfacing

Fiberglass Pool Conversion

Pool Gelcoat Repair

Fiberglass Pool Repair

Why Central Texas Pools Benefit from Fiberglass

Hill Country Rock Shelf

Limestone-Rich Hard Water

100°F Summers, Winter Freezes

Proud to Serve Central Texas Veterans

Our Central Texas Fiberglass Process

Assessment & Drain

Surface Preparation

System Application

Cure & Inspection

Refill & Warranty

Why Central Texas Chooses Hexagon

Central Texas Geology Specialists

Full-Scale Capability

Industry Recognition

Exclusive Technology

Our Central Texas Service Area

Central Texas Neighborhoods We Serve

Austin Metro

Hill Country

San Marcos & New Braunfels

Waco & I-35 North

Killeen-Temple Area

Bryan-College Station

All Central Texas neighborhoods covered

What Fiberglass Actually Costs You Over Time

Frequently Asked Fiberglass Pool Questions

1 How long does pool resurfacing take in Central Texas?

2 Do you service all Central Texas cities?

3 How does Central Texas heat affect pools?

4 How do I get started?

5 What is HEXConvert™ Resurfacing?

6 What is HEXConvert™ Re-Gel?

7 What makes fiberglass better than plaster?

8 What's included in your 25-year warranty?

9 Should I choose HEXConvert™ or Fibre Tech™?

10 Will conversion work for an old or damaged pool?

11 Can you convert any pool shape?

12 Will my pool look different after conversion?

13 Is fiberglass safe for saltwater systems?

14 Do I need to replace my pool equipment?

Save $1,500 on Your Pool Conversion

Your Home Deserves a Pool Surface That Matches It